- Home & Workshop Products
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
The parking mounting system on the D120 Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the 305 Loaders, the D120’s parking stands are kept in the torque tube for easy accessibility. To park the loader, simply install parking stands, remove pivot pins from the mast, disconnect the hydraulic hoses, and back out the tractor.
|Select up to 4 models to compare specifications||
|Front tire||18x8.5-10 4PR R4|
|Rear tire||26x12.00-12 4PR R4|
|Front axle configuration|
|Pump capacity||3.5 gpm|
|Rated pressure||1987 psi|
|Bucket used||Pin on Materials 1250 mm
|Bucket weight||51 kg
|Lift capacity at full height||Measured at pivot (U)
825 lbMeasured at 500 mm ahead of pivot (V)
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W)
944 lbMeasured at 500 mm ahead of pivot (X)
|Boom breakout force||Measured at pivot (Y)
1808 lbMeasured at 500 mm ahead of pivot (Z)
|Bucket rollback force capacity||At maximum height (VV)
1330 lbAt 59-in. (1500-mm) lift height (XX)
1568 lbAt ground-level line (ZZ)
|Dimensions||Maximum lift height (A)
71.2 in.At full height - bucket level(B)
65.1 in.At full height - bucket dumped (C)
|Overall length (I+F), ft (m)||2.6 m
|Overall height in carry position (J)|
|Digging depth (H)||-101 mm
|Reach||At maximum height (D)
22.5 in.At ground level - bucket level (F)
|Bucket angle||Dump angle, degrees (E)
-40.1 degree (angle)Rollback angle, degrees (G)
31.2 degree (angle)Dump angle, ground
-114.0 degree (angle)
|Cycle times||Loader raise, seconds
4.0 secondsLoader lower, seconds
2.5 secondsBucket dump, seconds
5.7 (without regen)/2.2 (with regen) secondsBucket rollback, seconds