5090GNTractor
- Working widths down to 43 inches
- Improved turning radius on the 5GN Series
- FT4 90 hp engine/76 hp PTO
- Two transmissions available: 12F/12R and 24F/12R
Features
Expand All
Collapse All
Overview of minimum working widths
5GV cab on 5GN Tractor
Auxiliary fuel tank
Optional extra lift capacity shown on the 5GN photo
Lift rods
Gear-shift lever with Hi-Lo selectors
Tailored to fit: John Deere specialty solutions
The 5G Final Tier 4 (FT4) Specialty Series now brings a narrow, ultra-narrow, and low-profile option to specialty applications.
The 5GV Series is built to operate in vineyards with a minimum working width of 108.8 cm (42.8 in.) from rear tire to rear tire. The 5GV Series cab, with an overall width of 108.1 cm (42.6 in.), is designed to pass between narrow vineyard rows. The 5GN features an extra- wide cab of 127.5 cm (50.2 in.). The 5GL series is manufactured with orchardists in mind. This low-profile tractor has an approximate height of 135.89cm (53.5 in.) and width of 152.4cm (60 in.) (depending on tire configuration), which makes it ideal for operating in orchards that are laden with heavy fruit.
The two-door cab on the 5GN and 5GV models offers the operator yet another convenience of entering and exiting from either side. With a distance of 560 mm (22.1 in.) between the right- and left-hand side consoles and a play of 285 mm (11.2 in.) between seat and steering wheel, the 5G Series provides one of the roomiest cabs in the specialty tractor market.
Overview of minimum working widths
Overview of minimum working widths
5G Specialty Series basic feature overview:
| Feature overview | 5GN | 5GV | 5GL |
| 100 hp (74 kW), 4-cylinder / 3.4 L (0.9 gal.) | 5100GN | N/A | N/A |
| 90 hp (63 kW), 4-cylinder / 3.4 L (0.9 gal.) | 5090GN | 5090GV | N/A |
| 75 hp (55 kW), 4-cylinder / 3.4 L (0.9 gal.) | 5075GN | 5075GV | 5075GL |
| Two-wheel drive (2WD) / four-wheel drive (4WD) | Only 4WD | Only 4WD | Only 4WD |
| Cab / open operator station (OOS) | Available | Available | Only OOS |
5GV cab on 5GN Tractor
The 5G Series has also expanded its platform offerings to include a 5GV cab on a 5GN Tractor. This option combines the fit of 5GV with the wider stance of a 5GN, providing excellent stability paired with the narrowest cab offering available in the 5G portfolio.
John Deere value
Performance: tailored to fit – matching narrow widths and low heights to producers’ high value crop applications.
Auxiliary fuel tank (5GN)
The 5GN models have an optional auxiliary fuel tank available, which increases the fuel tank capacity by up to 38 percent on the 5075GN and up to 33 percent on the 5090GN and 5100GN.
The increased capacity allows for more productive time in the field with fewer stops for refueling.
| Machine | Code | Fuel tank capacity | Code | Auxiliary tank capacity |
| 5075GN | Base | 86 L (22.7 gal.) | 8313 | 28.4 L (7.5 gal.) |
| 5090GN | Base | 73 L (19.3 gal.) | 8313 | 28.4 L (7.5 gal.) |
| 5100GN | Base | 73 L (19.3 gal.) | 8313 | 28.4 L (7.5 gal.) |
Auxiliary fuel tank
Versatile rear hitch
The heavy-duty 3-point hitch design on the 5G Series provides a standard maximum lift of 2590 kg (5,710 lb) at the ball ends. An optional additional lift cylinder is available for the 5GN Series, which increases the maximum lift capacity by 510 kg (1,124 lb) to 3100 kg (6,834 lb) at the ball ends.
Hooking up implements is quick and simple with the standard Category 2 3-point hitch on the 5GN. Hooking up implements that require Category 1 or Category 1N is also possible and requires very little time with the 5GV and 5GL.
Optional extra lift capacity shown on the 5GN photo
| Code | Description | Information | Availability |
| 8490 | Additional lift cylinder | Includes additional lift cylinder (maximum lift capacity at ball ends: 3100 kg [6,834 lb]) | 5GN |
| 4130 | Fixed ball ends | 3-point hitch with fixed ball ends for draft links | 5GN, 5GV |
| 4131 | Adjustable ball ends | 3-point hitch with adjustable ball ends for draft links | 5GN, 5GV |
| 4132 | Adjustable quick couplers | 3-point hitch with adjustable quick couplers for draft links | 5GN, 5GV, 5GL |
| 4151 | Hydraulic lift rod | Hydraulically adjust lift arm to tilt or level implement | 5GN, 5GV, 5GL |
| 4152 | Mechanical lift rod | Mechanically adjust lift arm to tilt or level implement | 5GN, 5GV, 5GL |
Lift rods
John Deere value
Performance: higher lift capacity for a wider variety of implements and strong performance means real versatility.
Transmission
The 5G Series comes standard with a 24 forward/12 reverse (24F/12R) PowrReverser™ transmission. The 24F/12R transmission provides 24 forward speeds and 12 reverse speeds for transport speeds of up to 40 km/h (24.9 mph). The transmission provides convenient Hi-Lo and declutch push-button controls. The Hi-Lo feature benefits operators who frequently transport their tractors from field to field or find themselves in bog-down situations during rear power take-off (PTO) work.
Users can push the rabbit button (high) without having to depress the clutch to get an increase in speed. They can also push the turtle button (low) to get a decrease in speed, similar to downshifting or engine braking without having to grab another gear. The PowrReverser transmission has a built-in engagement override valve for additional safety. This valve requires the clutch pedal to be depressed one time after each engine start before the transmission will begin to operate normally, giving the operator another opportunity to put all focus on the tractor. A neutral start switch requires the PowrReverser lever to be in the neutral position to start the engine.
Gear-shift lever with Hi-Lo selectors
| 24F/12R PowrReverser | |
| Speed (km/h) | 0.5 to 40 km/h (0.3 to 24.9 mph) |
| Creeper range | Yes |
| Configuration | Four-wheel drive (4WD) |
| Clutch type | Multi-disc wet clutch |
| Clutching required to shift | No |
| Reverser | PowrReverser |
| Hi-Lo | Electrohydraulic |
| Mechanical front-wheel drive (MFWD) engagement | Electrohydraulic, if MFWD option installed |
| PTO engagement | Electrohydraulic |
| Differential lock engagement | Electrohydraulic |
Specifications
| Specifications | ||
|---|---|---|
| Select up to 4 models to compare specifications | John Deere 5090GN Tractor |
Add Model |
| Engine description | 3.4L Fiat® Powertrain Technologies | |
|---|---|---|
| Engine displacement | 4 cylinder: 3.4 L 207 cu in. |
|
| Rated engine power | 67.1 kW 90 hp |
|
| Rated PTO power (hp SAE) | 59 kW 79 hp |
|
| Transmission type | 24F/12R PowrReverser, EH Hi-Lo | |
| Hydraulic pump rated output | Standard: 96.5 L/min 25.5 gpm Optional: 126.4 L/min 33.4 gpm |
|
| Rear hitch category (SAE designation) | Category 1/Category 1N | |
| Base machine weight | OOS: 2529.7 kg 5577 lb Cab: 2744.7 kg 6051 lb |
| Description | 3.4L Fiat® Powertrain Technologies | |
|---|---|---|
| Engine family | FPTF34 | |
| Rated speed | 2300 rpm | |
| Aspiration | Turbocharged | |
| Cylinders liners | Wet sleeved | |
| Emission level | Final Tier 4 | |
| After treatment type | Diesel Oxidation Catalyst (DOC) and Selective Catalyst Reduction (SCR) | |
| Displacement | 4 cylinder: 3.4 L 207 cu in. |
| Rated power | 67.1 kW 90 hp |
|
|---|---|---|
| Rated PTO power (hp SAE) | 59 kW 79 hp |
| Type | 24F/12R PowrReverser, EH Hi-Lo | |
|---|---|---|
| Reverser | Yes | |
| Clutch; wet/dry | Wet | |
| Creeper | Yes |
| Type | Open Center | |
|---|---|---|
| Pump rated output | Standard: 96.5 L/min 25.5 gpm Optional: 126.4 33.4 gpm |
|
| Available flow at a single rear SCV | 41.6 L/min 11 gpm |
|
| Number of rear selective control valves (SCVs) | Standard: 2 Optional: 4 |
|
| SCV control | Mechanical |
| Hitch draft control load sense type | Mechanical | |
|---|---|---|
| Hitch category (SAE designation) | Category 1/Category 1N | |
| Maximum lift capacity behind lift points | 2549 kg 5620 lb |
|
| Sensing type | Top Link Draft Sensing |
| Drawbar category | Extendable |
|---|
| Type | Standard: 540/540E | |
|---|---|---|
| Engine rpm (at rated PTO speeds) | 540 at 1938 rpm 540E at 1648 rpm |
|
| PTO actuation | Electrohydraulic |
| Type | Carraro Drivetech | |
|---|---|---|
| Final drive type | Three point inboard planetary drives | |
| Differential controls | Multi disk oil cooled design | |
| Axle type | Flanged | |
| Brakes, type and control | Multi-disc rear braking | |
| Rear differential lock | Electrohydraulic |
| Type | Carraro Drivetech | |
|---|---|---|
| Front axle differential lock | Self Locking Differential |
| Front | 6.50R16 | |
|---|---|---|
| Rear | 260/70 R16 | |
| Turning radius without brakes | 3627 mm 11.9 ft |
| Type | Dynamic Load Sensing, Hydrostatic, Flow Metering |
|---|
| Alternator size | 120 amp |
|---|
| Rollover protective structure, OOS | Rigid - foldable - telescopic Rigid, front folding Platform - flat/straddle Straddle Gearshift location - console/floor Floor Yes |
|
|---|---|---|
| Seat | OOS: standard: COBO MT SC74 M200 Optional: COBO MT SC74 M97 Cab: standard: COBO MT SC74 M200 |
|
| dB(A) rating | 82 |
| Wheelbase | 2098 mm 82.5 in. |
|
|---|---|---|
| Overall length | 4319 mm 170 in. |
|
| Drawbar clearance | Min. 226.1 mm 8.9 in. Max. 266.7 mm 10.5 in. |
|
| Front axle center | Min. 226.1 mm 8.9 in. Max. 266.7 mm 10.5 in. |
| Base machine weight | OOS: 2529.7 kg 5577 lb Cab: 2744.7 kg 6051 lb |
|---|
| Fuel tank | Standard: 73.1 L 19.3 U.S. gal. |
|---|
| Interval for engine oil change | 500 | |
|---|---|---|
| Interval for hydraulic/transmission oil change | 750 |
Shop and Buy
Maintenance and Support
You May Also Be Interested In
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.