52-in. (132-cm) Rotary Broom on X758 Tractor
The 52-in. (132-cm) Rotary Broom increases tractor versatility by allowing it to be used for a variety of sweeping jobs. The broom effectively meets the needs of commercial, farm, home, and estate operators with four-season versatility:
Spring
The broom can be used to dethatch lawns, and it cleans off tennis courts quickly and effectively.
Summer
The broom effectively performs a wide variety of sweeping jobs, including cleaning sidewalks, parking lots, driveways, construction job sites, and barns. It can also be used for backfilling trenches.
Fall
The broom can be used to sweep leaves and windrow pine needles. It sweeps artificial turf and cleans up spectator areas after sporting events.
Winter
It effectively moves up to 2 in. (5 cm) of snow, which may eliminate the need for a snow thrower, depending on the operator's geographic area.
The 52-in. (132-cm ) Rotary Broom is compatible with X700 Series and 1023E, 1025R, 1026R, model year 2016 and older 2025R and 2032R, 2305-2720, 2210, 4010, 4110, 4115, and 4100 Tractors.
NOTE: If a compact utility tractor is set up for an AutoConnect™ mid-mount mower, the quick-connect drive shaft and rear lift link must be removed from the tractor before installing the rotary broom.
Polypropylene wafers
The 52-in. (132-cm) wide brush section is assembled with 22 convoluted polypropylene wafers.
The wafer bristles' convoluted design provides good flicking action.
Replacement wafers can be ordered from Parts:
Center chain drive
A center chain drive provides dependable power to the broom head:
Shear bolt
Shear bolts are provided at the outer ends of each half of the broom and also on the power take-off (PTO) drive shaft to protect against damage:
Caster wheel
Left- and right-rear caster wheels are standard equipment:
Precise height-adjustment knob
Adjustments are convenient and easy to make:
Parking stands
Parking stands are standard equipment:
The storage position on the mounting brackets is convenient:
Drive shaft support
A wire-form support is provided to position the drive shaft for easy installation of the rotary broom.
Front quick-hitch mounting system
The broom slips over and locks into the front quick-hitch with attached snap pins:
NOTE: Garden tractors: The 52 Rotary Broom requires use of the newer BM19782 or newer front quick-hitch for installation on X Series Tractors. Interference will occur if installed using a BM17347 quick-hitch.
NOTE: Compact-utility tractors:
1) 2305, 2025R, 2032R, 2320, 2520, and 2720 Tractors must be equipped with front-attaching support kit for use with the Quik-Tatch front hitch.
2) If the operator plans to use a Quik-Tatch front hitch with an OnRamp™ Mower (2025R, 2032R, 2320, 2520, 2720 only), they will need a front hitch/mid mower combo bracket to retain a tool-free change between the front hitch and the mid-mower deck.
Hydraulic-angling cylinder
Standard hydraulic angling allows positioning the implement straight ahead or at an angle:
Front PTO (appearance varies by tractor model)
The front implement is powered by the tractor's 2000-rpm front PTO:
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 52-in. Quick-Hitch Rotary Broom For X700 Lawn Tractors, select Compact Tractors |
| Clearing width | Broom straight 52 in. 132 cm Broom angled 27 degrees: 48 in. 122 cm |
|||
|---|---|---|---|---|
| Brush | Diameter 21 in. 53.3 cm Number of wafers 22 convoluted |
| Broom straight | 52 in. 132 cm |
|||
|---|---|---|---|---|
| Broom angled | 27 degrees: 48 in. 122 cm |
|||
| Sweeping path |
| Diameter | 21 in. 53.3 cm |
|||
|---|---|---|---|---|
| Material | Polypropylene | |||
| Number of wafers | 22 convoluted | |||
| Drive | Front power take-off (PTO) | |||
| Sweeping height | 9 positions in increments of 5 in. 13 mm |
|||
| Speed | 220 rpm | |||
| Top speed | 1,209 fpm 369 m/min |
| On X700 | ||||
|---|---|---|---|---|
| On compact utility tractors |
| Right and left | 0 to 27 degree (angle) |
|---|
| Type |
|---|
| Housing | 14 gauge 0.07 in. 1.9 mm and 16 gauge 0.6 in. 15.5 mm steel |
|||
|---|---|---|---|---|
| Frame | Plate: 0.25 in. 6 mm and tube steel: 1.5 in. |
|||
| Lateral float | Hitch clearance |
| Input | Telescoping drive shaft | |||
|---|---|---|---|---|
| Center drive | Number 50 roller chain from offset 3:1 gearbox | |||
| Brush drive | ||||
| Brush shaft | Oil-filled metal flange bearing and thrust bearing, greaseable | |||
| Broom gearbox reduction | ||||
| Final drive |
| Size | With grease zerks: 6.25x3.25 in. 159x83 mm |
|||
|---|---|---|---|---|
| Adjustment | Four spacer: 0.5 in. 13 mm |
| Storage stands | Standard equipment |
|---|
| Type |
|---|
| Weight (broom only) | 240 lb 109 kg |
|||
|---|---|---|---|---|
| Shipping weight | 306 lb 139 kg |
| Date collected |
|---|
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.