54-in. (137-cm) Quick-Hitch Front Blade
The 54-in. (137-cm) Front Blade is excellent for moving snow, gravel, dirt, sand, or other loose material. It can be hydraulically angled up to 27 degrees right or left or used in the straight-ahead position.
The front quick-hitch mounting system allows for tool-free change between the front blade, rotary broom, and snow blower on garden and small-chassis tractors.
Front blade heavy-duty construction
Welded reinforcing angle behind front edge
A reinforcing angle is welded behind the front edge of the blade to provide added strength.
A replaceable cutting edge greatly extends the useful life of the blade. The cutting edge and blade form a continuous curve:
Breakaway feature
Breakaway feature locking pin
Two large coil springs allow the bottom of the blade edge to be pushed back if a solid object is struck:
Adjustable skid shoe
Adjustable skid shoe (optional heavy-duty skid shoe shown)
Adjustable skid shoes on each side of the blade allow the operator to select the correct blading height to match various conditions and job requirements:
Front quick-hitch mounting system
The hitch slips over and locks onto the tractor frame with attached snap pins:
NOTE:
1) 2305, 2025R, 2032R, 2320, 2520, and 2720 Tractors must be equipped with front-attaching support kit for use with the Quik-Tatch front hitch.
2) If planning to use a Quik-Tatch front hitch with an OnRamp™ mower (2025R, 2032R, 2320, 2520, 2720 only), a front hitch/mid mower combo bracket is needed to retain a tool-free change between the front hitch and the mid-mower.
Quick-hitch hydraulic lift and angling
The front blade has a vertical working range of approximately 12 in. (30.5 cm), with enough height for clearance over curbs and also the ability to work below ground level.
The blade can be used straight ahead or angled left or right, up to 27 degrees:
The blade is angled, raised, and lowered by using the tractor hydraulic system.
Angling cylinder
Hydraulic angling is available:
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 54-in. Quick-Hitch Front Blade For X700 Signature Series Lawn Tractors |
| Cutting width | Blade straight 54 in. 137 cm Blade angled 15 degrees: 52.2 in. 132.6 cm 27 degrees: 48.1 in. 122.2 cm |
|||
|---|---|---|---|---|
| Angling positions | Right and left 0 to 27 degree (angle) |
| Blade straight | 54 in. 137 cm |
|||
|---|---|---|---|---|
| Blade angled | 15 degrees: 52.2 in. 132.6 cm 27 degrees: 48.1 in. 122.2 cm |
| Overall height | ||||
|---|---|---|---|---|
| Overall length |
| Number of positions | ||||
|---|---|---|---|---|
| Right and left | 0 to 27 degree (angle) |
| Garden tractors | Above ground line: 11 in. 27.9 cm Below ground line: 3.5 in. 9.9 cm |
|||
|---|---|---|---|---|
| Compact utility tractors | Above ground line: 2025R, 2032R, 2320-2720: 11 in. 27.9 cm 2305: 8 in. 20.3 Below ground line: 2025R, 2032R, 2320-2720: 1.5 in. 3.5 cm 2305: 3.5 in. 8.9 cm Range of lift is approximate, and varies per model. |
| Type | Eight position |
|---|
| Blade | 0.12 in. 3.05 mm |
|||
|---|---|---|---|---|
| Replaceable scraper edge | 0.188 in. 4.78 mm |
| Type | Spring trip |
|---|
| Type | Hydraulic |
|---|
| Approximate weight | 23 kg 50 lb |
|---|
| Attaching time | ||||
|---|---|---|---|---|
| Removal time | ||||
| Date collected |
Product features are based on published information at the time of publication. Product features are subject to change without notice. Contact your local John Deere dealer for more information.