• (Change)
  • |
  • Dealer Locator
  • |
  • My Account
/ / / / Software Updates

Software Updates

GreenStar 3 2630 & GreenStar 2 (1800, 2100/2600) Displays

Download Now Button

Release Notes

Release Date:  July 2016

Version:

GreenStar 3 System 2630 Update:  3.33.1455

GreenStar 2 System 2100/2600 Update:  2.8.1033

GreenStar 2 System 1800 update: 2.14.1036

Important Notes:

  1. It is recommended to back up GreenStar™ 2 1800 Display and GreenStar™ 3 2630 Display data prior to updating to Software Update 16-2, as a precaution to protect your information.
  2. It is suggested to erase all data from your GreenStar™ 3 2630 Display, before loading new Setup Data, in an effort to remove unnecessary and potentially corrupt files that may hinder display performance.
  3. Software activations are non-transferrable in the event of lost, stolen, or destroyed equipment. It is recommended to insure a GreenStar™ Display at full value, including software activations.
  4. To ensure complete and proper functionality, the most current version of GreenStar™ Display software and Apex™, or preferred partner, desktop software should be used.

GreenStar Update Download instructions

GreenStar 3 CommandCenter (Controller Update Only)

Download Now Button

Release Notes

Release Date: July 2016

Generation 4 CommandCenter™ (4100/4600) Displays

Download Now Button

Release Notes

Release Date: October 2016

Download Instructions

Original GreenStar System Update

Download Now Button

Release Notes

Release Date: February 2011

Apex Farm Management Software

Download Now Button

Release notes

Release Date: November 2016

Apex 3.7.10 release to address defects.

Application Controller 1100 (iGrade, Active Implement Guidance)

Download Now Button

Release Date:  February 2016

Active Implement Guidance & iGrade application controller starting with version 2.00 software, will require a download to support additional languages.


Download Directions:

  1. Verify the file server folder on the memory device is empty.
  2. Connect a memory device (USB or Compact Flash Card)to the computer.
  3. Click on the link to download the language files.
  4. Click Run
  5. Select the correct drive for the memory device.
  6. Select Unzip to place the language files on the memory device.
  7. Remove the memory device from the computer and insert into the display.
  8. Change the language for the display while the memory device is still connected. Main Menu-->Display soft key-->Settings soft key-->select desired language from the drop down list.
  9. The memory device must be present to change the language of the Application Controller 1100. If you change the language after you remove the memory device the language of the Application Controller 1100 will revert back to English.
  10. Clean up controller object pool. Menu-->Message Center soft key-->Cleanup soft key-->select Controllers >select Begin Cleanup.
  11. Cycle key power.

Application Controller 1120 (Mobile Weather, Harvest ID Cotton)

Download Now Button

Release Date:  July 2016

Application Controller 1120, starting with version 1.00A software, will require a language download to support additional languages.


Download Directions:

  1. Verify the file server folder on the memory device is empty.
  2. Connect a memory device (USB or Compact Flash Card) to the computer.
  3. Click on the link to download the language files.
  4. Click Run
  5. Select the correct drive for the memory device.
  6. Select Unzip to place the language files on the memory device.
  7. Remove the memory device from the computer and insert into the display.
  8. Change the language for the display while the memory device is still connected. Main Menu-->Display soft key-->Settings soft key-->select desired language from the drop down list.
  9. The memory device must be present to change the language of the Application Controller 1120. If you change the language after you remove the memory device the language of the Application Controller 1120 will revert back to English.
  10. Clean up controller object pool. Menu-->Message Center soft key-->Cleanup soft key-->select Controllers >select Begin Cleanup.
  11. Cycle key power.

Raven AutoBoom®

Download Now Button


Release Notes:

Previously, AutoBoom nodes could be updated through a serial interface cable P/N 115-0230-011 or through a Raven field computer. This release of AutoBoom software does not include a serial update interface. The current version of AutoBoom software will need to be loaded through a Raven field computer or a Raven Service Tool P/N 117-0171-464. Damage may be caused to the node if the serial update cable is used.


Release Date: May 2015

Raven SmartBoom™

Download Now Button

Release Notes:


  1. Fix for Spanish and Portuguese for left/right language switched.
  2. Fix for Portuguese for Sections spelled wrong
  3. Change to Setting number of sections, now caps Planter sections to 8 and 4 for Pneumatic and Electric respectfully.
  4. Fixed bug on menu home screen for some languages.
  5. Added Translation for Mode and Planter/Sprayer in the System menu.

Release Date: September 2009

Field Connect™ Firmware Update

Download Now Button

Download Now Button

MPFILE.BIN
File Size: 871 KB
GWFRMWR.BIN
File Size: 287 KB

Release Notes

Release Date: March 2016