With over 100 attachments offered in the John Deere portfolio you can make the most out of your skid steer or compact track loader by equipping it with a number of popular attachments.
For additional information on attachments and compatibility, check out the John Deere attachments guide
To maximize productivity and comfort, an array of enhancements have been made to the spacious and comfortable cab on the mid frame sized machines to keep operators satisfied throughout the entire day.
Enhanced visibility features enable the operator to view the jobsite to be as precise and productive as possible while also increasing jobsite awareness.
Enhanced serviceability features and ease of access to daily and preventative maintenance points ensures that these tasks do not significantly cut into working hours
The 325G is a reliable machine with low owning and operating costs that also offers customers an array of productivity features for rental companies, landscapers, or contractors.
|Select up to 4 models to compare specifications||
Compact Track Loader
|Emission Rating||EPA Tier 4 / EU Stage IV|
|Displacement, ltr (Inches³)||3.3 (203)|
|Rated Speed, rpm||2500|
|Engine Output - Net, kW (hp)||52.5 (70)|
|Engine Output - Gross, kW (hp)||54.8 (74)|
|Torque, Nm (lbf / ft)||280 (207)|
|Track Shoe Width, mm (inches)||320 (12.6)|
|Length - No Bucket, mm (inches)||2850 (112.3)|
|Length - Foundry Bucket, mm (inches)||3460 (136.3)|
|Width - No Bucket, mm (inches)||1820 (71.5)|
|Height - Top Of Cab, mm (inches)||2060 (81.1)|
|Ground Clearance, mm (inches)||240 (9.3)|
|Rear Departure Angle, Degrees||30.5|
|Height to Hinge Pin, mm (inches)||3200 (126.1)|
|Dump Angle, Degrees||41|
|Dump Height - Maximum Foundry, mm (inches)||2590 (102.1)|
|Rollback - Ground Level, Degrees||34|
|Fuel Tank, ltr (gallons (US))||79 (21)|
|Rated Operating Capacity - Foundry, kg (lbs)||1176 (2590)|
|Tipping Load - Foundry, kg (lbs)||3360 (7400)|
|Ground Bearing Pressure - Foundry, kPa (PSI)||39.3 (5.7)|
|Speed - Maximum, kph (mph)||13.2 (8.2)|
|Breakout - Lift Foundry, kN (lbf)||23.3 (5250)|
|Breakout - Bucket Foundry, kN (lbf)||38.9 (8750)|
|Hydraulic Power, kW (hp)||30.617 (41)|
|Hydraulic Power - Option, kW (hp)||47.103 (63.1)|
|Pump Flow, lt/min (gallons (US) / min)||78 (21)|
|Pump Flow - Option, lt/min (gallons (US) / min)||120 (32)|
|System Pressure, bar (PSI)||237.87 (3450)|
|Operating Weight - Foundry, kg (lbs)||4313 (9500)|
on New John Deere Compact Track Loaders.
†For complete details regarding this offer, please select the corresponding link below.
Every John Deere machine comes with a level of comfort through our full machine standard warranty. It promises we’ll fix any defects in materials or workmanship on our compact equipment for two years after delivery or 2,000 hours.*
* As of June 1, 2018, applies to purchases of new John Deere skid steers, compact track loaders, compact excavators, and compact wheel loaders from John Deere or authorized John Deere dealers. Warranty expires two years after the delivery receipt date or after 2,000 machine hours, whichever occurs first. Offer valid at participating dealers only. Some restrictions may apply. See your dealer for complete details.
Features and specifications are based on published information at the time of publication. Features and specifications are subject to change without notice.