- Home & Workshop Products
The hydrostatic 3WD system has variable speed for excellent pulling and pushing power.
Instruments and electronic controls are positioned for easy reach and visibility:
Raising the hinged rear fiberglass body cowling exposes the 16-hp*(11.9-kW), 479-cc air-cooled, overhead valve engine:
*At 3600 rpm. Engine manufacturer gross power per SAE J1940. Tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to the engine manufacturer’s website for additional information.
The forward and reverse foot pedals provide ease of identification and operation. The forward pedal is larger than the reverse pedal and provides good clearance for the operator's foot. This is the same two-pedal design used on the John Deere 2500A Riding Greens Mower.
A heavy-duty air filter is standard equipment on the 1200A Bunker and Field Rake. Featuring a cyclone design, this dual element filter can eject 90 percent to 95 percent of dust particles before they reach the paper element core. This reduces overall maintenance costs through less cleaning and replacement.
The operator's platform is designed for comfort, control, and high productivity:
Wide high-flotation tires provide low ground compaction.
The 47-in. (119-cm) wheelbase enables a tight turning radius.
|Select up to 4 models to compare specifications||
Bunker & Field Rake
29.3 cu in.
|Horsepower||At 3600 rpm: 11.9 kW
Engine Manufacturer Gross Power per SAE J1940. Tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to engine manufacturer's website for additional information.
|Oil capacity||Without filter: 1.4 L
1.5 U.S. qt
|Spark arrester muffler||Standard|
|Idle speed||Low speed: 1,750 rpm
fast idle speed (low load): 3,100 rpm
|Tank capacity||14.8 L
3.9 U.S. gal.
|Fuel required||Unleaded gasoline|
|Type||Hydrostatic with 3 hydraulic wheel motors|
|Fluid capacity||12.2 L
12.9 U.S. qt
|Forward or reverse||Variable: forward: 0-16.09 km/h
reverse: 0-6.4 km/h
|Type||Dual rear wheel parking brakes; dynamic braking provided by closed loop hydrostatic powertrain|
|Type||Chain drive steering wheel with 10-to-1 gear ratio: 35.6 cm
|Front||One 22x11x8 NHS 34.5 kPa
|Rear||Two 22x11x8 NHS 34.5 kPa
|Ground clearance @ rake attachment||241 mm
|Weight (approx.)||449 kg
|Rear-hitch towing capacity|
|60-in. aluminum front blade|
|Articulating front-mount core-removal blade|
|Wide- and narrow-interval scarifier tines attachment|
|Mid-mount 64.5-in. (164.9 mm) scraper blade attachment|
|Rear-mounted 60-in. field finisher|
|Hydraulic pump package|
|Operator ear||76 dBA|
|Measuring standard||ISO 11201|
A rear rake is standard equipment.
A mid-mount scarifier tine section can be mounted to the 1200 Hydro.
The scarifier is recommended where surface cultivation and preparation requirements dictate that small rocks (up to 2-1/2-in. diameter) must be allowed to pass through the scarifier or for relieving surface compaction on skinned areas of baseball fields, running tracks, and athletic complexes. Also works very well for grooming cinder, crushed brick, and small gravel warning tracks.
The mid-mounted cultivator is available as an attachment for field conversion that provides more aggressive cultivation and weed control.