Z915EZTrak™ Zero-Turn Mower
- 7-Iron™ II Mowing Deck
- Gasoline Engine
- Hydrostatic Drive Train
- Commercial-grade Operator Seat
Specs & Compare | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere Z915E ZTrak™ Zero-Turn Mower |
Engine Manufacturer/model | CV742 | |||
---|---|---|---|---|
Engine power | Gross at 3,600 rpm: 25 hp 18.6 kW |
|||
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
|||
Mower deck size | 48, 54, 60 in. 122, 137, 152 cm |
|||
Blade tip speed | Approximately 18,000 fpm | |||
Transmission | Hydrostatic | |||
Speed range | 0-10 mph 0-16.1 km/h |
|||
Drive wheels | 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.) | |||
Caster wheels | 13x5-6 | |||
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Manufacturer/Model | CV742 | |||
---|---|---|---|---|
Power | At 3,600 rpm, 25 hp 18.6 kW |
|||
Displacement | 45.6 cu in. 747 cc |
|||
Cylinders | Two | |||
Crankcase capacity | With filter, 2 U.S. qt 1.9 L |
|||
Oil filter | Full flow, replaceable | |||
Lubrication | Full pressure | |||
Cooling | Air | |||
Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
|||
Injection |
Fuel type | Gasoline | |||
---|---|---|---|---|
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr |
|||
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
|||
Fuel tank switch/shut-off valve | Yes |
Charge system | 15 amp | |||
---|---|---|---|---|
Battery voltage | 12 V | |||
Cold cranking amp | 300 amp | |||
Hour meter | Standard, digital | |||
Operator presence starting system | Brake-N-Go (hand) |
Transmission | Hydrostatic | |||
---|---|---|---|---|
Hydraulic pumps | ||||
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor | |||
Travel speed | Speed range 0-10 mph 0-16.1 km/h Forward 0-10 mph 0-16.1 km/h Reverse 0-4.5 mph 0-7.2 km/h |
|||
Speed and direction control | Twin levers | |||
Hydraulic capacity | 5.9 U.S. qt 5.6 L |
|||
Hydraulic oil cooler | ||||
Filter | Internal, replaceable |
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
---|
Drive wheels | 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.) | |||
---|---|---|---|---|
Rear tires | ||||
Load rating | 4 PR |
Dynamic braking | Twin levers | |||
---|---|---|---|---|
Park brake | Internal wet disk integrated in the transmission | |||
Park brake actuation | Hand brake |
Type | Electro-magnetic, 200 lb-ft 271 Nm |
|||
---|---|---|---|---|
Drive | V-belt |
Size | 48, 54, 60 in. 122, 137, 152 cm |
|||
---|---|---|---|---|
Deck construction | 7-Iron PRO, one-piece stamped steel with reinforcements | |||
Deck thickness | 7 gauge 0.180 in. 4.6 mm |
|||
Discharge | Side | |||
Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
|||
Cutting width | 48, 54, 60 in. 122, 137, 152 cm |
Length | Varies by deck size | |||
---|---|---|---|---|
Thickness | 0.25 in. 0.64 cm |
|||
Blade tip speed | Approximately 18,000 fpm | |||
Number | Three |
Caster wheel type | Pneumatic Front | |||
---|---|---|---|---|
Caster wheels | 13x5-6 | |||
Front anti-scalp rollers | RH, center, LH | |||
Rear anti-scalp rollers | Optional |
Length | 84 in. 213 cm |
|||
---|---|---|---|---|
Width | With chute down, 62, 68, 74 in. 157, 173, 188 cm |
|||
Height | With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm |
|||
Weight | 1,100 to 1,178 lb 499 to 534 kg |
Rollover protective structure (ROPS) | Yes | |||
---|---|---|---|---|
Slope operating limit | 20 degrees (10 degrees with material collection system installed) |
Date collected | 1-Oct-2022 |
---|
*Manufacturer's suggested price in USD. MSRP may be different in California. Shown with optional equipment not included in the price. Attachments and implements sold separately. Taxes, destination charge, freight, setup, and delivery not included. Equipment, models, features, options, attachments and prices may vary by dealer. John Deere reserves the right to change specifications, model features, design, and price of the products described here without notice. Before operating or riding, always refer to the safety and operating information on the vehicle, and in the Operator’s Manual. Actual vehicle top speed may vary based on belt wear, tire selection, vehicle weight, fuel condition, terrain and other environmental factors. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.