- Specialty Tractors (75-155 Engine HP)
- Utility Tractors (22.4 - 140 Engine HP)
- Utility Tractor Attachments & Implements
- Home & Workshop Products
Our FT4/Stage IV diesels employ field-proven cooled exhaust gas recirculation (EGR), easy-to-maintain high-uptime exhaust filters, and selective catalytic reduction (SCR).
Quad-Cool places the radiator, air-conditioner condenser, intercooler, and hydraulic, transmission, and optional axle coolers in a unique boxed configuration that's isolated from engine heat.
Automatic torque-converter PowerShift™ transmission with adjustable clutch cutoff feature improves productivity.
All daily service points, including fuel, are grouped on the left side for quick and convenient ground-level access. Sight gauges enable quick fluid-level checks.
Choose single-lever joystick or two-lever fingertip pilot-operated hydraulic controls.
Simple, easy-to-use payload weighing, powered by Loadrite™ technology, is integrated into the LCD color monitor and is available factory- or field-installed for Z-Bar and High-Lift machines.
Our production-class loaders have two hydraulic pumps as part of a closed center and load sensing system.
Sealed-switch module keeps out dust and moisture while eliminating nearly 100 wires. Prevent unauthorized machine operation with keyless-start requiring a numeric pass code.
Optional rearview camera and radar object-detection system
Specs & Compare
|Select up to 4 models to compare specifications||
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PSS 6135|
|Emission Rating||Tier 4|
|Displacement, ltr (Inches�)||13.5 (824)|
|Rated Speed, rpm||1500|
|Engine Output - Net, kW (hp)||248 (333)|
|Torque, Nm (lbf / ft)||1635 (1206)|
|Torque Rise, %||57|
|Front Differential Type||Locking|
|Rear Differential Type||Open|
|Tire size - Standard||26.5 R25|
|Service Brake - Type||Wet Disc|
|Service Brake - Location||All Wheels|
|Service Brake - Actuation||Hydraulic|
|Parking Brake - Type||Wet Multi Disc|
|Height - Over Cab, mm (ft/in)||3550 (11 ft 8 in)|
|Wheelbase, mm (ft/in)||3460 (11 ft 4 in)|
|Length - Including Bucket, mm (ft/in)||9280 (30 ft 5 in)|
|Ground clearance, mm (inches)||462 (18.2)|
|Width Over tires - Std, mm (ft/in)||3084 (10 ft 1 in)|
|Height - Pivot Pin, mm (ft/in)||4480 (14 ft 9 in)|
|Reach - At 2130mm 45� Dump, mm (ft/in)||2050 (6 ft 9 in)|
|Turning Circle - Maximum, mm (ft/in)||14340 (47 ft 1 in)|
|Fuel Tank, ltr (gallons (US))||477 (126)|
|Hydraulic Tank, ltr (gallons (US))||165 (43.7)|
|Axle - Front, ltr (gallons (US))||55.3 (14.6)|
|Axle - Rear, ltr (gallons (US))||55.3 (14.6)|
|Transmission, ltr (gallons (US))||27.9 (7.375)|
|Heaped Capacity, m� (yd�)||4.6 (6)|
|Bucket Capacity - Smallest, m� (yd�)||4.6 (6)|
|Largest bucket capacity, m� (yd�)||5.2 (6.75)|
|Breakout - Bucket , kgf (lbf)||18718 (41266)|
|Ride Control System||Yes|
|System Voltage, V||24|
|Alternator Output, Amp||130|
|Pump Flow, lt/min (gallons (US) / min)||491 (130)|
|System Pressure, bar (PSI)||251.66 (3650)|
|Operating Weight, kg (lbs)||26800 (59083)|
|Dump Height, mm (ft/in)||3190 (10 ft 6 in)|
|Reach at Full Height, mm (ft/in)||1280 (4 ft 2 in)|
|Tipping Load - Straight, kg (lbs)||20464 (45115)|
Check out the 824K-II hard at work from an operator’s vantage point.
Check out the 844K-II hard at work from an operator’s vantage point.
Features and specifications are based on published information at the time of publication. Features and specifications are subject to change without notice.