- Specialty Tractors (75-155 Engine HP)
- Utility Tractors (22.4 - 140 Engine HP)
- Utility Tractor Attachments & Implements
- Home & Workshop Products
Our IT4/EU Stage IIIB engines employ cooled exhaust gas recirculation (EGR) for reducing NOX, and a diesel particulate filter and diesel oxidation catalyst to reduce particulate matter.
Quad-Cool design isolates coolers from engine heat for increased efficiency and durability, and keeps them well protected behind the heavy-duty grille and fan.
Hydraulic-driven variable-speed fan runs only as needed, reducing noise and fuel consumption.
Separate, sealed hydraulic and hydrostatic systems with common fluid and filter codes eliminate cross contamination.
In-cylinder sensors enable better control and help speed cycles in repetitive applications.
Counter-rotating tracks and variable speed control increases productivity.
Choose joystick, multiple-lever hydraulic controls, or V-pattern transmission lever.
Large service doors open wide, and same-side daily checkpoints are conveniently grouped for ground-level access.
Operator station tilts a full 53 degrees in minutes, for wide-open component access.
Total Machine Control (TMC) allows you to customize operating characteristics and response, for superb, one-of-a-kind control. TMC can also be used to monitor machine readings such as mileage and hours.
Heavy-duty sealed and lubed undercarriage is standard, with SC-2 extended-life optional.
Specs & Compare
|Select up to 4 models to compare specifications||
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PVX 6068|
|Emission Rating||Interim Tier 4|
|Displacement, ltr (Inches�)||6.8 (41)|
|Rated Speed, rpm||1800|
|Engine Output - Net, kW (hp)||110 (145)|
|Final drive type||In-line Drive Motor|
|Track rollers per side - std||6|
|Track shoe pitch, mm (inches)||190 (7.5)|
|Track shoe width, mm (inches)||508 (20)|
|Ground Contact Area, cm� (Inches�)||24622 (3816)|
|Track shoes per side - std||38|
|Overall length, mm (ft/in)||6735 (22 ft 1 in)|
|Max. height, mm (ft/in)||3120 (10 ft 3 in)|
|Track length on ground, mm (inches)||2414 (95)|
|Ground clearance, mm (inches)||395 (15.6)|
|Track gauge - standard, mm (ft/in)||1740 (5 ft 9 in)|
|Shovel 1 width, mm (ft/in)||2470 (8 ft 1 in)|
|Shovel 1 dump height 45� max, mm (ft/in)||2665 (8 ft 9 in)|
|Bucket pin height, mm (ft/in)||3710 (12 ft 2 in)|
|Bucket reach - max, mm (ft/in)||1036 (3 ft 5 in)|
|Digging depth, mm (inches)||152 (6)|
|Steering clutches and brakes||Yes - Hydrostatic|
|Fuel tank capacity, ltr (gallons (US))||263 (69.5)|
|Implement hydraulic tank, ltr (gallons (US))||121 (32)|
|Shovel 1 capacity, m� (yd�)||1.9 (2.4)|
|Ground bearing pressure - standard, kPa (PSI)||73.7 (10.7) - GP Bucket|
|Static tipping load shovel 1, kg (lbs)||12443 (27432)|
|Breakout force - max, kN (lbf)||148 (33271)|
|Alternator output, Amp||100|
|Pump type||Piston Pump - Load Sensed|
|Pump flow, lt/min (gallons (US) / min)||189 (50)|
|Relief pressure, kPa (PSI)||26028 (3775)|
|Operating weight std, kg (lbs)||18422 (40614)|