A 22-hp (16.4-kW) V-twin engine with 44.2-cu in. (724-cc) displacement provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
The Z525E engine has extended life series (ELS) features for enhanced performance and longer life.
Replaceable fuel filter and oil filter are easy to access and change to minimize service time and cost.
John Deere recommends the use of fuel stabilizer in gasoline. See Fuel-Protect for gasoline engines (8 oz) for more information
A convenient service interval decal provides basic maintenance information. It provides a quick-reference for keeping recommended service up to date.
The footrest area is hinged and easily raised for service to mower deck:
The engines are easy to service, including changing the oil and the oil filter and servicing the air filter.
Accel Deep™ Mower Decks have several features that make them easy to service:
Tie-down locations are provided for convenience and safety when trailering the machine.
ZTrak Mowers are designed around a heavy-duty formed and welded steel frame for strength and reliability.
Large front caster wheels and large rear drive wheels provide several operator benefits:
The operator platform is roomy and uncluttered for maximum comfort, and the controls are convenient to use:
The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:
Large discharge opening is both high and wide to handle more material:
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:
A wash port is provided to make cleaning the underside of the mower deck easy.
MulchControl is an innovative, simple design that is easy to use and maintain:
The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
Mower wheels are double-captured:
Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.
The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.
Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
The 48A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:
The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
An optional 6.5-bu (230-L) Power Flow Rear Bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:
MulchControl is well-suited to the following mowing situations:
MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.
While in the side-discharge mode, MulchControl will still mulch about one-third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
The Z375R and the Z525E have a full-featured engine with extended life series (ELS) features that is engineered to deliver world-class endurance and power. A step above the competition, it is designed to be more dependable and longer lasting, saving time and money over the long run.
Built to exceed demanding needs by incorporating premium features and innovative designs:
Teflon is a trademark of E.I. du Pont de Nemours and Company or its affiliates.
The motion-control levers can be adjusted to three different height settings and fifteen different fore-aft settings:
A standard shock absorber for the motion-control levers makes maneuvering ZTrak™ Mowers easy and comfortable:
On-board tracking adjustment from the operator seat is quick and easy. The cut-height pin includes a 13-mm wrench and doubles as a convenient tool for adjusting tracking and the motion-control lever position:
The operator control panel is conveniently located and easy to use.
The following instruments and controls are included:
The park brake is conveniently located:
The operator station is designed for operator comfort and convenience in operating all controls:
Comfortable seats with two suspension springs and no-tools fore-aft seat adjustment, that can be used by the operator while seated:
Two steel springs under the seat absorb shocks when traveling over rougher areas to provide a smoother ride.
The commercial-style steel footrest flips up to provide easy access for servicing the mower deck:
Specs & Compare
|Select up to 4 models to compare specifications||
|Power||22 hp 16.4 kW|
|Model number||M44 Extended Life Series (ELS)|
|Displacement||44.2 cu in. 724 cc|
|Lubrication||Full pressure with replaceable filter, capacity, 2 U.S. qt 1.9 L|
|Battery||12 V 300 CCA|
|Choke/speed control||Separate levers|
|Fuel tank capacity||4.5 U.S. gal. 17 L|
|Fuel gauge||Fuel level sight line|
|Dual hydros||Tuff Torq TZ17-D with 1-in. (2.5-cm) axles|
|Forward speed||0-8.5 mph 0-13.7 km/h|
|Reverse speed||0-4 mph 0-6.4 km/h|
|Speed and direction control||Twin levers|
|Control adjustment||3 height/18 positions|
|Frame||Heavy-duty frame tubing|
|Front caster tires||13x5-6|
|Front caster bearings||Sealed ball bearings|
|Service interval decal||Yes|
|Seat back height||Medium back with armrests, 15 in. 38.1 cm|
|Fore-aft adjustment||While seated, 3 in. 7.6 cm|
|Seat suspension||Two springs|
|Type||Hand lever with optional foot lift|
|Mower cut height||1-4 in. 2.5-10.2 cm|
|Cut height increments||0.25 in. 0.64 cm|
|Preset cut height||Yes|
|Width of cut||48 in. 122 cm 54 in. 137 cm|
|Mower deck material||10 gauge 0.135 in. 3.4 mm|
|Mower drive system||V-belt|
|Type||Electric, 125 lb-ft 169.5 Nm|
|Wheelbase||48.7 in. 123.7 cm|
|Overall length||76.7 in. 194.8 cm|
|Width without mower||47.4 in. 120.4 cm|
|Width with mower||48A - 62.6 in. 159 cm 54A - 68.8 in. 174.8 cm|
|Width with mower (deflector raised for storage)||48A - 54 in. 137.2 cm 54A - 59.7 in. 151.6 cm|
|Height||39.4 in. 100.1 cm|
|Weight||With mower and fuel, 48A, 615 lb 279 kg With mower and fuel, 54A, 631 lb 286 kg|
|Operator presence system||Yes|
|Park brake interlock||Yes|
|Note 1||Mower wash port makes cleaning the deck easier|
|Note 2||Flip-up foot platform for easy service access|
|Note 3||18-position adjustable motion-control levers|
|Rear bagger||6.5 bu 229.1 L|
|Double light kit||Yes|
|Rubber floor mat||Yes|
|Mounted sprayer||15 U.S. gal. 56.8 L|
|Light kit||Dual headlight kit|
|Material collection system||Power Flow rear bagger, 6.5 bu 229.1 L|