The 625D Draper Platform increases combine productivity in small-grain and rice harvests.
The 625D has a true 25-ft cutting width, and the unique draper-style crop cutting system delivers the high-capacity feeding required of the high-capacity STSTM Combines.
All John Deere 600D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft) and 12.1-m (40-ft) draper cutterbars also have knifeback reinforcement straps to strengthen the knifeback.
Double-cut cutterbar system
Double-cut rock guard
The 100-mm (4-in.) cutting action produces a cleaner cut versus the tearing effect of shorter-stroke cutting systems. Knife hold-downs are easily adjusted to help maintain harvesting performance.
The cutterbar hydraulic tilt adjusts a full 8 degrees while maintaining excellent visibility to the cutterbar throughout the tilt range. For improved ease of use the optional advanced hydro handle can be configured to control the platform tilt.
Although an integrated transport is not available for the 625D Draper, there is still a solution to move the 625D from field to field quickly. This solution is the HT12 Header Transport from Frontier™ products.
Key features of this equipment are as follows:
John Deere Machine Sync adds unprecedented automation to combine harvesting. This automation, coupled with harvesting logistics information, has revolutionized the harvesting experience.
The adoption of on-the-go unloading during harvest continues to increase as combines spend more time with the unloading auger on while harvesting record-setting yields. By offering a new level of automation, John Deere Machine Sync minimizes operator stress and maximizes the benefits of on-the-go unloading.
John Deere Machine Sync facilitates on-the-go unloading by synchronizing tractor speed and direction of travel with the combine. This provides greater ease of operation with improved efficiency, resulting in higher productivity during harvest.
Productivity gains are credited to tractor/grain cart operator’s ability to be in the right place at the right time with in-field logistics information.
The automation and logistics information provided by Machine Sync is made possible with the John Deere Machine Communication Radio.
The John Deere Machine Communication Radio creates a network between the fleet of tractors and combines, allowing automation between the combine and tractor. The network can be any combination of tractors and combines up to 10 machines. The GreenStar™ 3 2630 Display shows in field logistics including grain tank fill status, direction of travel, and location for each combine and tractor in the networked fleet.
NOTE: Machine Sync is unavailable on the Generation 4 CommandCenter™ until after the version 18-1 software release.
John Deere Machine Sync is designed to:
Cutterbar epicyclical gearcase
Knife drive shaft
The unique dual-knife-drive system is timed, creating the smoothest-possible reciprocating knife-drive system currently in the industry. The positive, reliable shaft-driven dual epicyclical in-line knife drives with built-in driveline protection provide operators with the strongest knife-drive system.
Reel resume and reverse are features on the 600D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, leaning crops.
|Select up to 4 models to compare specifications||
625D Draper Platform
|Type||Straight line knife drive system|
|Length||7.8 m 25.5 ft|
|Knife drive||Base single, optional dual knife (combine use only) Base dual knife (SPW only or SPW/combine combination use)|
|Knife speed||490 cycles/min 1,040 spm|
|Cutterbar tilt||Base Hydraulic, 9 degrees tilt maximum|
|Number of slats||6 bat poly base 8 bat steel optional (for forage conditions)|
|Fingers||Nylon (steel optional, typically used in rice or forage conditions)|
|Diameter||1,067 mm 42 in. For rice or forage conditions 1,371 mm 54 in.|
|Reel lift||Cylinder stroke 330 mm 13 in. Total range 391.5 mm 15.4 in.|
|Reel fore and aft||Cylinder stroke 359 mm 14.1 in. Total range 620 mm 24.4 in.|
|Operating speeds||6-54 rpm|
|Operating speeds (54-in. reel)||5-44 rpm|
|Width||0.7 L 24 oz rubber coated polyester with V-Guide tracking Side belts 1,016 mm 40 in. Center belts 1,397 mm 55 in. Center belt not included with SPW configuration|
|Clean height||25.4 mm 1 in.|
|Operating speed||Side belts: variable up to 223 m/min 735 fpm Center belts: 212 m/min 695 fpm Center belt not included with SPW configuration|
|Speed control||Hydraulic from cab|
|Center belt reverse||Base; Center belt not included with SPW configuration|
|Diameter||406 mm 16 in. Feed drum not included with SPW configuration|
|Feed drum fingers||Steel heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer|
|Number of fingers||18|
|Auger finger platform||Dual chevron, retracting|
|Finger reach||152 mm 6 in.|
|Operating speed||195 rpm|
|Center clean out door||Base|
|Header height sensing on the ground||Base|
|Type||Optional hydraulic drive|
|Platform length||8.5 m 27.9 ft|
|Overall operating depth||2.4 m 7.9 ft|
|Transport width, field position||8.1 m 26.5 ft|
|Approximate weight (pickup reel)||Combine only 2,884 kg 6,359 lb SPW only 2,284 kg 5,036 lb|
|Approximate weight (optional 54-in. reel)||Combine only 2,974 kg 6,556 lb SPW only 2,374 kg 5,234 lb|
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.