The in-furrow 975 Plow, available with 3, 4, or 5 bottoms, is ideal for small- to medium-sized tractors. The on-land 995 Plow, in 5, 6, or 7 bottoms, gives you maximum productivity from larger-horsepower tractors.
Compatible with tractors equipped with Quik-Coupler, the integral hitch offers unexcelled maneuverability in turns and when parking in tight areas:
All 975 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way rollover plows with two sets of bottoms:
The reversing pin is positioned at a 13.5-degree angle, instead of being straight up, for even plowing in both directions. The reversing pin does not require adjustments by the operator.
The V-style mainframe is made of 152-mm x 102-mm (6-in. x 4-in.) welded tubular steel to handle the stress of tough plowing and reversing action as well as tight turns:
The width of cut on all 975 Moldboard Plows can be set at 406 mm or 457 mm (16 in. or 18 in.) by moving the standards to different bolt holes in order to:
The underframe clearance is 813 mm (32 in.) to allow excellent material flow through the plow.
All 975 Moldboard Plows come with a rear gauge wheel included in standard equipment. The rear gauge wheel provides the following features:
Specs & Compare
|Select up to 4 models to compare specifications||
|Type||Category 3N, 3, or 2|
|Steering||Integral, in-furrow YesIntegral, on-land NoSemi-integral, on-land NoDrawn, in-furrow NoDrawn, on-land NoQuick-coupler compatible Yes|
|Reversible||Type of reversing Hydraulic cylinder Yes|
|Option 1||Range -- 2, 8 to 3, 0 ft, in. .63 to .91 m|
|Option 2||4, 0 to 4, 5 ft, in. 1.2 to 1.4 m|
|Option 3||5, 3 to 6, 0 ft, in. 1.6 to 1.8 mm|
|Option 4||6, 6 to 7, 5 ft, in. 2.0 to 2.3 m|
|Option 1||900 lb 408 kg|
|Option 2||1,200 lb 544 kg|
|Option 3||1,700 lb 771 kg|
|Option 4||2,300 lb 1043 kg|
|Vertical||32 in. 813 mm|
|Option 1||Plowing depth 14 in. 350 mm Steel moldboard|
|Option 2||Plastic moldboard|
|Option 1||6x4-in. x 3/16-in. thick for 2 or 3-bottoms|
|Option 2||6x4-in. x 4/16-in. thick for 4 or 5-bottoms|
|Option 1||2-bottom: 50-70 hp|
|Option 2||3-bottom: 70-95 hp|
|Option 3||4-bottom: 95-140 hp|
|Option 4||5-bottom: 130-165 hp|
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.