The 913 V-Ripper is ideal to use with a smaller tractor to manage deep subsoiling jobs. It is designed for light- to no-residue conditions.
3-point hitch hookup is for Category 2 or 3N tractors.
The integral hitch can be set to two positions:
The frame design of the 913 V-Ripper positions the standards in a V pattern:
The 127-mm x 178-mm (5-in. x 7-in.) cross-section frame has 10-mm (3/8-in.) thick walls:
The soil probe helps operators to determine the proper operating depth of their ripper points,
38 mm (1.5 in.) below the bottom of the compaction layer.
The probe allows obtaining the maximum amount of soil fracturing from the entire family of John Deere ripper points. Marked in 51-mm (2-in.) increments from 254 mm to 559 mm (10 in. to 22 in.), the probe provides accurate feedback of compaction layer depth.
It is stored on the mainframe of the ripper for convenient access. The operator's manual explains the proper use of the soil probe.
|Select up to 4 models to compare specifications||
|Frames||5x7x.375-in. (127x178x9.5 mm) nonexpandable frame for 3 standards|
|Working Widths||5 to 7.5 ft. (1.52 to 2.29 m)|
|Parabolic shear bolt||1.25x33-in. (32x838 mm)|
|Underframe clearance||35.5 in. (910 mm)|
|Maximum working depth||23 in. (584 mm)|
|Nominal trip force||12,000 lb. (5,441 kg)|
|Spacing||20, 25, or 30 in. (508, 635, or 752 mm)|
|Optional||Parabolic safety-trip and spring-reset, 1.25x33 in. (32x838 mm).
Underframe clearance 39.7 in. (1008 mm); maximum working depth 22 in. (559 mm); nominal trip force 5,600 lb. (2539 kg) for safety trip, 5,300 lb. (2403 kg) for the spring-reset.
Parabolic cushion trip (with or without wear shin), 1.25x33-in. (32x838 mm); and straight cushion trip with wear shin.
Straight shear bolt and safety-trip, 1.25x33 in. (32x838 mm).
Under-frame clearance: shear bolt 35.5 in. (910 mm), cushion trip 37.5 in. (953 mm), safety trip 39.7 in. (1018 mm)
|Points||2.25-in. (57 mm) point; optional points: 2.25-in. (57 mm) single- or double-capped points; or 2.75-in. (70 mm), 5-in. (127 mm), 7-in. (178 mm), or 10-in (254 mm) cast LaserRip™ sweeps|
|Hitch||Integral, Category 2 or 3N with Quik-Coupler, and Category 3N without Quik-Coupler|
|Recommend Tractor Size||75 to 150 PTO hp (56.5 to 113 kW)|
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.