The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength.
The steel front side of the hopper is bolted to the rear of the tractor frame:
A standard rear hitch is included for pulling tow-behind equipment. Simply lift off the hopper and the hitch is ready to use.
The tractor is powered by a John Deere iTorque™ Power System, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.
A large 603-cc, 18.5-hp (13.8-kW) engine has plenty of power and torque for superior performance. The larger, more powerful engine also allows the engine in the rear-discharge tractor to be operated at a lower 3100-rpm speed for quieter operation.
Key engine features include:
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
The one-piece hood opens easily to permit checking and servicing the engine:
The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.
Hopper latch is easily adjustable for operator preference and conditions:
The hopper is easily removed by using the rear handle to raise the back end of the hopper 25 degrees, or about 5 in. (13 cm), and then using both handles to lift the hopper vertically out of the notches:
The chute can be easily pulled out and removed:
Smooth, rounded contours present a modern, stylish appearance:
The innovative design of the rear hopper sets a high standard for collecting systems:
The rear hopper is shipped in the returnable shipping crate with the tractor:
The hopper is made of durable materials and sealed to keep dust away from the operator.
A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable on-board deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.
Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.
The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:
Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:
NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.
The operator station is designed for operator comfort and ease of using controls:
An open-back 15-in. (38-cm) high-back seat provides a comfortable, smooth ride and good support for the operator:
The seat suspension is adjustable, without tools, for the weight of the operator:
A cup holder and tool tray are located on the fender for operator convenience:
A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.
A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:
The innovative design of the 42-in. (107-cm) Edge™ Rear-Discharge Deck combines the best features for reliability and superior performance when mowing, collecting, and mulching grass and leaves:
The mower deck is contoured and free of obstructions to ensure optimum cutting and bagging performance:
Mulch plug easily installs in place of hopper:
A wash port is provided on the mower deck. It can be used to supply water to the underside of the deck so it can be easily cleaned after use:
Optional rear deflector (BM25065) easily installs in place of hopper:
A heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:
Easy steering is important to give the operator an enjoyable mowing experience:
The contoured dash has clean, attractive styling and ergonomic controls for easy use:
Display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:
Twin Touch foot pedals control the speed and direction of travel:
Cruise control is standard equipment:
Rotary dial knob makes adjusting mower cut height quick and easy:
Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat.
Pushing with the foot to raise the mower or implement is less strenuous for many operators:
Depressing brake pedal applies internal wet disk brakes (increased durability and longer life) for safe stopping.
Parking brake control is conveniently located for easy access; holds brake pedal securely in locked position.
|Select up to 4 models to compare specifications||
Lawn Tractor with 42-inch Rear-Discharge Deck
|Displacement||36.8 cu in.
|Type||Overhead valve, full-pressure lube, oil filter|
|Cylinders||V-twin, cast-iron liners|
|Choke/speed control||Separate levers, automatic choke return|
|Air cleaner||Dry, replaceable with foam precleaner|
|Oil drain||No tools|
|Fuel delivery||Pulse pump, carburetor|
|Fuel gauge||Low fuel indicator|
|Fuel tank location||Rear|
|Fuel fill opening||On left fender, 3 in.
|Fuel tank capacity||2 U.S. gal.
|Charging system||Flywheel alternator, regulated, 15 amp|
|Headlights||Two standard, incandescent, 27 W|
|Taillights or reflector||No|
|Rear work lights||No|
|Type||K46 hydrostatic integrated with transaxle|
|Control||Twin Touch™ pedals|
|Cruise control||Yes, button on dash|
|Oil cooler||Fins and fan on transaxle|
|Oil filter||Internal, not replaceable|
|Forward speed||0-5.3 mph
|Reverse speed||0-4 mph
|Brakes||Internal wet disc|
|Weight bracket||Optional front|
|Front axle||Cast iron front axle, front wheel ball bearings|
|Hood material||Molded-in color hood material reduces sound, will not rust or dent|
|Fender deck material||Stamped steel|
|Floor mats||Sure-grip rubber|
|Storage||On fender and under seat|
|Service interval decal||Yes|
|Equipment mounting||Yes, front|
|Type||Manual, sector and pinion|
|All-wheel steer||Not available on this model|
|Steering wheel||Large, 14 in.
|Tilt steering wheel||No|
|Turning radius||16.5 in.
|Uncut circle radius||Right, 23 in.
Left 28 in.
|Type||Open-back design with grasp|
|Seat back height||15 in.
|Fore-aft adjustment||While seated, slide rail, 14-position, 7 in.
|Seat suspension||Tilt, two coil springs, three-position no-tools adjustment for operator weight|
|Type||Foot pedal with non-adjustable spring assist, optional adjustable spring assist kit available (required for snow blower use)|
|Mower cut height||13 positions, 1-4 in.
|Cut height increments||0.25 in.
|Preset cut height||Yes|
|Type||Rear discharge, rear collect, mulch|
|Cutting width||42 in.
|Construction||Stamped steel deck shell|
|Mower deck material||11 gauge
|Mower wash port||Yes|
|Mower drive system||Electric power take-off (PTO) clutch, in-line belt|
|Mower wheel adjustment||Four-position, tool required|
|Mower level adjustment||Exact Adjust ports and onboard deck-leveling gauge|
|Type||Slide under tractor|
|Front draft arms||Attached with spring pins at two points|
|Rear draft arms||Two pins and spring clips|
|Mower wheels rotate||No|
|Drive system||Dual belt|
|Meets ANSI standard||Yes|
|Meets OPEI standard||Yes|
|Backup protection||Reverse Implement Option (RIO)|
|Notes||Includes rear hopper and mulch plug, optional rear deflector available
One-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dent
Durable E-coat primer and powder-paint finish
|Warranty||4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)|
|Mowers||Rear discharge, rear collect (standard), 42 in.
|Rear bagger||Rear hopper, 8.5 bu
|Powered material collection|
|Mulching system||Standard mulch plug|
|Front thatcher||38, 46, 54 in.
96.5, 116.8, 137.2 cm
|Front blade||44 in.
|Snow blower||Two-stage, 44 in.
|Rear power take-off (PTO)|
|Sprayer||Tow-behind, 15 U.S. gal.
Tow-behind, 25 U.S. gal.
|Spreader||Tow-behind, 125 lb
Tow-behind, 175 lb
|Front bumper||Styled bumper option|
|Rear receiver hitch|
|Grass striping||Lawn striping kit|
|Tractor shovel||40 in.
|Overall length||99 in.
|Width with mower||43.8 in.
|Width with mower (deflector raised for storage)|
|Width without mower||38 in.
|Weight||Mower, no fuel, 646 lb
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.