It's easy to make adjustments to the 622 Rigid Cutting Platform. Plus, you get a 22-foot cutting width and an epicyclic knife drive.
Heavy-duty epicyclic knife-drive gearbox provides an enhanced knife-drive system that increases drive capacity with less vibration and improved reliability.
The updated mechanical header height sensing system for 600R Platforms is a major improvement to rigid platform operation. This system maintains a consistent cut height from 100 mm to 355 mm (4 in. to 14 in.).
A single-point connection located on the platform and combine allows easy hookup from the ground without the use of tools, saving time when moving from field to field and when changing header types.
One easy motion of the lever connects the electrical circuits, hydraulic circuits, and header retaining pins.
The adjustments are fewer and easier on the 600 Series Platforms.
Platform adjustments are made from standing on the ground, using one 24-mm (15/16-in.) wrench. All adjustments are made from the left-hand side, with the exception of the reel pitch and platform auger position on the right-hand side.
Specs & Compare
|Select up to 4 models to compare specifications||
Flex Cutting Platform
|Key Specifications||Epicyclic knife drive to increase drive capacity Safe and damage-free storage Raised-height skid shoe Perma-Glide™ floating divider points|
|Cutterbar Angle||14 degrees|
|Number of Slats (Reel)||5|
|Platform Auger Diameter||26 in. (660 mm)|
|Cutting Width Dimensions||22 ft. (6.7 m)|
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.