600F HydraFlex Platforms

622 Flex Cutting Platform

With the 622 Flex Cutting Platform, you'll benefit from four-inch double-cut knives that provide both increased cutting capacity and harvesting speed.

625 Flex Cutting Platform

The heavy-duty epicyclic drive on the 625 Flex Cutting Platform boosts both drive capacity and reliability.

630 Flex Cutting Platform

With the 630 Flex Cutting Platform, you can run faster and cut cleaner over uneven ground. Float arms with hydraulic cylinders give you a full six inches of float.

635 Flex Cutting Platform

The 635 Flex Cutting Platform provides a full 35-foot cutting width, the HydraFlex™ float system, and an epicyclic knife drive.

635FD HydraFlex Draper Platform

The John Deere 635FD HydraFlex Draper Platforms provide for increased combine productivity in soybeans and other small-grain crops.

 

Sized right
Available in 5 models, ranging from 20- to 35-foot widths.

Segmented skid shoes
You’ll get the flexibility you need to follow ground contours, so you can reduce field losses in down or tangled crops.

HydraFlex technology
Run faster and cut cleaner over uneven ground. Float arms with hydraulic cylinders give you a full six inches of float. When ground conditions changes, you can adjust the float pressure from the cab to match cutting conditions. For rigid operation, simply use the maximum pressure, or use mechanical lock-out brackets.

Knife Drive
This heavy-duty epicyclic drive boosts both drive capacity and reliability.

Double-Cut Knives
Four-inch double-cut knives provide both increased cutting capacity and harvesting speed.

26-inch diameter auger
With its five-inch flighting and long, retractable fingers, this auger aggressively grabs a thick crop mat for smooth feeding into the feederhouse.