It's easy to make adjustments to the 625 Rigid Cutting Platform, which features a 25-foot cutting width and rigid header height sensing.
The updated mechanical header height sensing system for 600R Platforms is a major improvement to rigid platform operation. This system maintains a consistent cut height from 100 mm to 355 mm (4 in. to 14 in.).
Heavy-duty epicyclic knife-drive gearbox provides an enhanced knife-drive system that increases drive capacity with less vibration and improved reliability.
The adjustments are fewer and easier on the 600 Series Platforms.
Platform adjustments are made from standing on the ground, using one 24-mm (15/16-in.) wrench. All adjustments are made from the left-hand side, with the exception of the reel pitch and platform auger position on the right-hand side.
A single-point connection located on the platform and combine allows easy hookup from the ground without the use of tools, saving time when moving from field to field and when changing header types.
One easy motion of the lever connects the electrical circuits, hydraulic circuits, and header retaining pins.
|Specs & Compare|
Rigid Cutting Platform
|Type||Knife system with in-line gearbox 102 mm 4 in.|
|Cutterbar angle||14 degree (angle)|
|Cutterbar length||5.5 m 18 ft|
|Tilt adjustment||17 (located on feederhouse) degree (angle)|
|Knife sections||Heavy-duty, over-serrated|
|Guards||Forged steel, heat-treated|
|Knife speed||520 cycles/min|
|Number of slats||5|
|Diameter||1,016 mm 40 in.|
|Number of slats||6|
|Diameter||1,067 mm 42 in.|
|Operating speeds||6-44 rpm|
|Diameter||660 mm 26 in.|
|Operating speed||Slow down 135, 152 rpm Speedup 170 rpm|
|Reel motor displacement (per revolution)||0.2 L 11.9 cu in.|
|Reel drive system pressure||14,000 (+/- 1,000) kPa 2,000 (+/- 150) psi|
|Reel fore/aft stroke||359 mm 14.1 in.|
|Cutting width||7.6 m 25 ft|
|Gathering width||7.7 m 25.3 ft|
|Overall width||8 m 26.1 ft|
|Approximate weight||2,135 kg 4,706 lb|
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.