- Specialty Tractors (75-155 Engine HP)
- Utility Tractors (22.4 - 140 Engine HP)
- Utility Tractor Attachments & Implements
- Home & Workshop Products
The 1.5L displacement, liquid-cooled TNV Series Yanmar® diesel engine provides 32.5 horsepower and high levels of torque reserve to handle tough jobs. All Yanmar TNV series engines feature lower levels of exhaust emissions and reduced noise levels. The engines meet all current EPA requirements for Interim Tier 4 emission standards.
Gross engine hp*
* As per 97/68/EC ISO @ rated speed.
Key features of the engine are:
Yanmar is a U.S.-registered trademark of Yanmar Company Limited.
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASABE Category 1 Standard S278.6 for quick-attach hitches.
NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
The 4105 Tractor is available only with a two-range hydrostatic transmission (HST) that is incorporated in a die-cast aluminum transmission case.
Sauer-Danfoss is a U.S.-registered trademark of Sauer-Danfoss, Inc.
All 4105 Tractors have a clear, semi-flat operator's station with controls in ergonomically friendly locations that allow for all-day work with little to no fatigue.
All tractors come with a high-back seat that offers good back support for comfortable operation. Adjustable both fore and aft, the seat flips forward for protection from the elements. The retractable seat belts are in base equipment.
Operator presence system:
A canopy is available to help protect the operator from the elements.
The left-side step allows for easy access on and off the tractor. The foot platform has a non-skid surface for safe, sure footing.
Grab handles are located on both rear fenders to make it easy for the operator to get on and off the tractor. A cup holder is located on the right rear fender for convenience.
The 2-post Roll-Gard™ rollover protective structure (ROPS) is in base equipment to protect the operator in the event of a tractor rollover. A plastic operator's manual storage canister is located on the ROPS and can easily be accessed from the seat.
|Select up to 4 models to compare specifications||
Compact Utility Tractor
|Family||CYDXL1.50K3T or DYDXL1.50L3T or EYDXL1.50L3T or FYDXL1.50L3T|
|Engine power (gross)||30.2 kW
97/68/EC rated power
|Power take-off (PTO) power||24.2 kW
|Rated engine speed||2800 rpm|
|Injection pump type||In-line with electric shutoff|
|Emissions compliance||Tier 4 Interim or Final Tier 4|
|Cylinders/displacement||3 / 1.496 L
3 / 91.3 cu in.
|Number of cylinders||Three|
|Bore and stroke||84 x 90 mm
3.3 x 3.54 in.
|Cooling system||Water pump|
|Air cleaner||Dual element with electronic restriction indicator|
|Engine torque at rated speed||80.3 Nm
|Fuel tank capacity||39.7 L
10.5 U.S. gal.
|Battery size||500 CCA|
|Alternator (12-V)||40 amp|
|Starter size||1.4 kW
|Fuel consumption||8.9 L/hr
2.35 U.S. gal./hr
|Standard transmission; forward/reverse||Hydro, 2-Range|
|Optional transmission; forward/reverse|
|Transmission gear ranges|
|Clutch disk diameter wet clutch|
|Drawbar maximum vertical load|
|Pump rated output||Steering
|Pump type||Dual gear|
|Maximum operating pressure||2500 psi|
|Draft control sensing||Position control|
|Remote control valves available||2|
|Lift capacity, 24-in. behind link arms||999 kg
|Standard||Rear @ 540 rpm|
|Brake (for mid and rear PTO)||N/A|
|Crankcase with filter||4.3 L
|Transmission and hydraulic system||25.7 L
6.8 U.S. gal.
|Rollover protective structure||Type
|Platform - flat/straddle||Semi-flat|
|Gear shift location - console/floor||Left Side|
|Air conditioning, temperature differential|
|Front axle clearance||373 mm
|Turning radius with brakes|
|Turning radius without brakes||2.89 m
|Limited slip differential|
|Approximate shipping weight (open-station; cab)||1355 kg
|Front||10-16.5 R4 / 8-16 R1 - MFWD|
|Rear||17.5L-24 R4 / 14.9-24 R1 - MFWD|
|Front tread range|
|Rear tread spacing|
|Tilt steering wheel|
0% APR for 60 Months† WITH up to $5,250 in bonuses† on New John Deere 4 Family Compact Utility Tractors.
†For complete details regarding this offer, please select the corresponding link below.