2430Chisel Plow
- Hydraulically-adjusted knife-edge rolling basket with internal scraper
- Radial tires improve flotation and transport
- New rear hitch adjusts side-to-side for easier hookups
Features
Expand All
Collapse All
Knife-edge rolling basket for the 2430 Chisel Plow
Internal basket scraper
Close-up of internal basket scraper
240 Coil-Tine Chisel Plow Harrow
2430 Chisel Plow
2430 Chisel Plow
2430 Chisel Plow
3.4-m (11.17-ft) four-bar frame
Finishing components
The 2430 offers different rear attachment options to meet the unique agronomic needs of each producer. Producers have a choice of two rear attachments on the 2430 Chisel Plow.
Knife-edge hydraulic rolling basket with internal basket scraper
Knife-edge rolling basket for the 2430 Chisel Plow
Internal basket scraper
Close-up of internal basket scraper
The knife-edge rolling basket for the 2430 Chisel Plow is made of hardened steel and handles rock strikes and adverse conditions well. The ease of down pressure adjustability allows the tool to adapt to changing field conditions. The internal basket scraper allows for a uniform field finish in wet conditions because baskets do not need to be raised out of the ground to avoid plugging; they can remain in the ground 100 percent of the time.
The John Deere 2430 Chisel Plow offers an active hydraulic rolling basket that gives the operator wide-ranging adjustability for a variety of conditions. The drawbars and rolling basket on the rear harrow are built with strength in mind for the demanding fall conditions. The system was designed to have the ability to run the rolling baskets in three different positions to finish and level the soil:
- Raised: allows the operator to raise the rolling baskets in harsh, muddy conditions
- Float: allows the operator to float the rolling baskets to lightly fluff soil
- Apply down pressure: allows the operator to adjust the basket pressure to provide consistent contact with the ground, provides a firm seedbed, and shatters root balls
The hydraulic rolling basket is offered with the knife-edge basket, which is the best for heavier, wet soil.
Coil-Tine Chisel Plow Harrow
240 Coil-Tine Chisel Plow Harrow
The Coil-Tine Chisel Plow Harrow is designed specifically for the 2430 Chisel Plows. Harrow performance has grown increasingly important over the last few years as soil profile finish and residue-handling capability are on the top of the list for producers. Both attributes are standouts on this heavy harrow.
Variety of models and sizes available
2430 Chisel Plow
2430 Chisel Plow
The 2430 Chisel Plow is available in rigid and rigid fold, three-section folding, and five-section folding frame models.
Models |
Type of fold |
Standards |
Rigid |
Non-fold or horizontal fold |
TruPosition™ or |
Flexible |
Three-section |
TruPosition or |
Flexible |
Five-section |
TruPosition |
Rigid configurations |
||
| Working widths | Centerframe size | Transport width |
| 3.35 m to 4.47 m (11 ft to 14 ft, 8 in.) | 3.66 m (12 ft) non-folding | 3.35 m to 4.9 m (11 ft to 16 ft) |
| 4.3 m to 5.4 m (14 ft to 17 ft, 8 in.) | 4.6 m (15 ft) non-folding | |
| 5.3 m to 6.4 m (17.5 ft to 21 ft) | 3.66 m (12 ft) folding | |
| Three-section configurations | ||
| Working widths | Centerframe size | Transport width |
| 6.4 m to 7.5 m (21 ft to 24 ft, 7 in.) | 3.05 m (10 ft) | 4.8 m (15.3 ft) |
| 7.6 m to 8.7 m (25 ft to 28 ft, 8 in.) | ||
| 7.04 m to 7.8 m (23 ft, 1 in. to 25 ft, 9 in.) | 3.66 m (12 ft) | 5.5 m (17.58 ft) |
| 8.2 m to 9.3 m (27 ft to 30 ft, 8 in.) | ||
| 9.2 m to 10.3 m (30 ft, 4 in. to 33 ft, 8 in.) | ||
| 10.7 m to 11.35 m (35 ft to 37 ft, 3 in.) | ||
| 9.14 m to 9.9 m (30 ft to 32 ft, 3 in.) | 4.6 m (15 ft) | 6.375 m (20.58 ft) |
| 10.4 m to 11.6 m (34 ft, 2 in. to 38 ft, 2 in.) | ||
| 12.2 m to 12.9 m (40 ft to 42 ft, 3 in.) | ||
| Five-section configurations | ||
| Working widths | Centerframe size | Transport width |
| 13.4 m to 14.2 m (44 ft to 46 ft, 8 in.) | 3.66 m (12 ft) | 5.3 m (17.25 ft) |
| 14.2 m to 15.2 m (46 ft, 9 in. to 50 ft) | ||
| 15.85 m to 16.7 m (52 ft to 54 ft, 8 in.) | ||
| 14.3 m to 15.2 m (46 ft, 11 in. to 49 ft, 10 in.) | 4.6 m (15 ft) | 6.1 m (20 ft) |
| 16.8 m to 17.6 m (55 ft to 57 ft, 10 in.) | ||
| 18.3 m to 19.2 m (60 ft, 2 in. to 63 ft) | ||
NOTE: Tru-Depth standards are available through 10 m (33 ft) only.
Excellent residue-handling capability
2430 Chisel Plow
The 2430 Chisel Plow has excellent residue-handling capability in primary tillage at all residue levels.
Typical percentages of residue cover remaining from the 2430 are listed in the following table. The percentages do not consider variables such as the condition of the residue, speed, and soil type.
For machines with 305-mm (12-in.) spacing:
Starting |
Remaining non-fragile* |
Remaining fragile** |
||||||
406-mm (16-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
102-mm x 368-mm (4-in. x 14.5-in.) shovel |
406-mm (16-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
406-mm (16-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
|
100 |
80 |
70 |
100 | 80 |
70 |
100 |
80 |
70 |
90 |
72 |
65 |
90 |
72 |
65 |
90 |
72 |
65 |
80 |
65 |
56 |
80 |
65 |
56 |
80 |
65 |
56 |
70 |
55 |
50 |
70 |
55 |
50 |
70 |
55 |
50 |
60 |
50 |
42 |
60 |
50 |
42 |
60 |
50 |
42 |
50 |
40 |
35 |
50 |
40 |
35 |
50 |
40 |
35 |
40 |
32 |
28 |
40 |
32 |
28 |
40 |
32 |
28 |
*Non-fragile residue includes crops like corn, sorghum, wheat than 1585.8 L [45 bu]).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 1585.8 L [45 bu]), sunflower, peanuts, and cotton.
For machines with 406-mm (16-in.) spacing:
Starting |
Remaining non-fragile* |
Remaining fragile** |
||||||
457-mm (18-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
102-mm x 368-mm (4-in. x 14.5-in.) shovel |
76-mm x 610-mm (3-in. x 24-in.) shovel |
457-mm (18-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point | 102-mm x 368-mm (4-in. x 14.5-in.) shovel |
76-mm x 610-mm (3-in. x 24-in.) shovel | |
100 |
83 |
73 |
63 |
63 |
55 |
50 |
45 |
45 |
90 |
75 |
68 |
58 |
58 |
50 |
45 |
40 |
40 |
80 |
68 |
59 |
53 |
53 |
45 |
40 |
35 |
35 |
70 |
58 |
53 |
45 |
45 |
38 |
35 |
30 |
30 |
60 |
53 |
45 |
38 |
38 |
33 |
30 |
27 |
27 |
50 |
43 |
38 |
33 |
33 |
27 |
25 |
22 |
22 |
40 |
35 |
31 |
28 |
28 |
22 |
20 |
18 |
18 |
*Non-fragile residue includes crops like corn, sorghum, and wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, and cotton.
Proven frame construction
3.4-m (11.17-ft) four-bar frame
Operators are requiring faster field working speeds, larger implements, and tractors because of a dramatic increase in farm size. The market is asking for and receiving tractors with more torque, more weight, and more horsepower.
Accommodating 600 engine horsepower tractors requires more from implement frame and hitch components, including thicker frame tubes, additional diagonal bracing, and frame gussets.
The frame is constructed of continuous 102-mm x 102-mm (4-in. x 4-in.) cross members inserted through 51-mm x 152-mm (2-in. x 6-in.), 76-mm x 152-mm (3-in. x 6-in.), and 102-mm x 152-mm (4-in. x 6-in.) fore-aft members. The mainframe boasts a structure made up of 102-mm x 152-mm (4-in. x 6-in.) fore-aft tubes.
The large frame member sizes, joint welds, and wheel module placement adds to the structural integrity, providing a stable front-to-rear and side-to-side operation.
Frame construction offers:
-
Consistent operating depth
- Level operation
- Restricts frame dip
Specs & Compare
Add Model
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 2430 Chisel Plow |
Key Specs
| Working widths - Rigid frame | Option 1 3.56 to 5.28 m 11.67 to 17.33 ft 3.05 to 5.49 m 10 to 18 ft |
|||
|---|---|---|---|---|
| Transport width -Rigid frame | ||||
| Maximum depth | Rigid, TruPosition: max: 20.32 cm 8 in. Spring-reset TruDepth: max: 30.5 cm 12 in. |
|||
| Miles per hour | 8 to 11.3 km/h 5 to 7 mph |
|||
| Horsepower per foot | 14.7 to 24.5 kW/m 6.0 to 10 hp/ft Rigid and TruPosition standards on spacing: 30.5 cm 12 in. 11 to 18.35 kW/m 4.5 to 7.5 hp/ft Rigid and TruPosition standards on spacing of: 40.6 cm 16 in. 14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.) 11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.) |
|||
| Standard spacings - Inches | 30.5 cm 12 in. 40.6 cm 16 in. |
Fold
| Type | Drawn Rigid, 3-Section Drawn Flex C-Shank, 5-Section Drawn Flex C-Shank |
|---|
Working widths
| Rigid frame | Option 1 3.56 to 5.28 m 11.67 to 17.33 ft |
|||
|---|---|---|---|---|
| Drawn rigid fold | Option 1 5.3 to 6.25 m 17.5 to 20.5 ft |
|||
| 3-section | Option 1 6.65 to 8.5 m 21.83 to 28 ft Mainframe: 3.05 m 10 ft Option 2 7.2 to 11.79 m 23.6 to 38.7 ft Mainframe: 3.66 m 12 ft Option 3 9.35 to 13.1 m 30.67 to 43 ft Mainframe: 4.57 m 15 ft |
|||
| 5-section | Option 1 13.4 to 16.66 m 44 to 54.67 ft Mainframe: 3.66 m 12 ft Option 2 14.33 to 19.2 m 47 to 63 (15 mainframe) ft Mainframe: 4.57 m 15 ft |
Transport width
| Rigid frame | Option 1 3.05 to 5.49 m 10 to 18 ft |
|||
|---|---|---|---|---|
| Drawn rigid fold | Option 1 3.35 to 4.88 m 11 to 16 ft |
|||
| 3-section | Option 1 4.67 m 15.33 ft Mainframe: 3.05 m 10 ft Option 2 5.36 m 17.58 ft Mainframe: 3.66 m 12 ft Option 3 6.27 m 20.58 ft Mainframe: 4.57 m 15 ft |
|||
| 5-section | Option 1 5.26 m 17.25 ft Mainframe: 3.66 m 12 ft Option 2 Mainframe: 6.1 m 20 ft Mainframe: 4.57 m 15 ft |
Transport height
| Rigid frame | ||||
|---|---|---|---|---|
| Rigid over-center fold | ||||
| 3-section | Option 1 3.3 to 4.2 m 10.83 to 13.75 ft Mainframe: 3.05 m 10 ft Option 2 3.28 to 5.05 m 10.75 to 16.58 ft Mainframe: 3.66 m 12 ft Option 3 3.89 to 5.36 m 12.75 to 17.58 ft Mainframe: 4.57 m 15 ft |
|||
| 5-section | Option 1 4.37 to 4.98 m 14.33 to 16.33 ft Mainframe: 3.66 m 12 ft Option 2 4.4 to 5.3 m 14.42 to 17.42 ft Mainframe: 4.57 m 15 ft |
Operation depth
| Maximum depth | Rigid, TruPosition: maximum: 20.32 cm 8 in. Spring-reset TruDepth: maximum: 30.5 cm 12 in. |
|---|
Operating speed
| Miles per hour | 8-11.3 km/h 5 to 7 mph |
|---|
Horsepower required
| Horsepower per foot | 14.7 to 24.5 kW/m kW 6.0 to 10 hp/ft Rigid and TruPosition standards on spacing: 30.5 cm 12 in. 11 to 18.35 kW/m 4.5 to 7.5 hp/ft Rigid and TruPosition standards on spacing of: 40.6 cm 16 in. 14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.) 11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.) |
|---|
Depth control
| Option 1 | TruSet Tillage In-cab controls and Single-point crank-adjust | |||
|---|---|---|---|---|
| Option 2 | Single-point crank-adjust | |||
| Option 3 |
Hydraulic requirements
| Standard | ||||
|---|---|---|---|---|
| Option 1 | ||||
| Option 2 |
Electrical requirements
| Standard | ||||
|---|---|---|---|---|
| Option 1 | ||||
| Option 2 |
Hitch
| Description | Floating Tubular T-Hitch: on Rigid and 3-section: 15.2x25.4 cm 6x10 in. On 5-section: 15.2x30.5 cm 6x12 in. |
|---|
Frame
| Tubing | High strength, box beam steel cross tubes: 10.2x10.2 cm 4x4 in. End tubes, patented 4-bar tube-through-tube frame design, welded construction: 5.08x12.7 cm 2x5 in. |
|||
|---|---|---|---|---|
| Number of ranks | ||||
| Fore-and-aft | 340.4 cm 134 in. |
|||
| Underframe clearance | Rigid and TruPosition: 71.1 cm 28 in. Spring-reset and TruDepth: 81.3 cm 32 in. |
Standard spacings
| Inches | 30.5 cm 12 in. 40.6 cm 16 in. |
|---|
Standard options
| Option 1 | Spec 3.2x5.08x81.3 cm 1.25x2x32 in. Maximum operating depth 20.3 cm 8 in. Underframe clearance 81.3 cm 32 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. Spring-reset |
|||
|---|---|---|---|---|
| Option 2 | Spec 3.2x5.08x71.1 cm 1.25x2x28 in. Trip height 25.4 cm 10 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 71.1 cm 28 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. TruPosition |
|||
| Option 3 | Spec 3.2x5.08x81.3 cm 1.25x2x32 in. Trip height 27.9 cm 11 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 81.3 cm 32 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. TruDepth |
|||
| Option 4 |
Ground-engaging components
| Choices | Variety of sweeps, shovels, and chisel points |
|---|
Wheels
| Centerframe depth control wheels and tires | Option 1 Drawn Rigid: Castering Front and Walk-Over Tandem Rear with (6) IF280/70R15 134D Tires Option 2 3-section: 6.4 to 8.7 m 21 to 28.7 ft Center Frame - 10 ft 3.05 m Castering Front with (2) IF280/70R15 134D Tires and Single Rear with (2) IF 320/70R15 144D Tires on Center Frames Option 3 3-section mainframe of: 6.7 to 10.3 m 22 to 33.67 ft (3.7-m [12-ft] Center Frame) Castering Front and Walkover TandemTM Rear with (6) IF 280/70R15 134D Tires on Center Frames Option 4 3-section: mainframe: 10.7 to 11.4 m 35 to 37.25 ft (3.7-m [12-ft] Center Frame) 0 through 11.79 m Castering Front and Walkover TandemTM Rear with (6) IF 280/70R15 134D Tires on Center Frame Option 5 5-section: 13.4 to 16.8 m 44 to 55 ft Castering Front and Walk-over™ Tandem Rear with (6) IF 320/70R15 144D Tires on Center Frames Option 6 5-section: 18.6 m 61 ft Castering Front and Walk-over™ Tandem Rear with (2) IF 320/70R15 144D Tires on Center Frames (4) 285/70R19.5 |
|||
|---|---|---|---|---|
| Wing frame wheels and tires | Option 1 3-section: (6) 11L-15FI Load Range D Option 2 5-section: 13.4 to 16.8 m 44 to 55 ft Castering Front with (2) 11L-15FI Load Range D and Walk-over™ Tandem Rear with (4) 12.5L-15FI Load Range F on Inner Wing Frames Castering Front and Walkover Tandem Rear with (6) 11L-15FI Load Range D on Outer Wing Frames Option 3 5-section: 18.6 m 61 ft Castering Front (2) 280/70R15 and Walk-over™ Tandem Rear with (4) 320/70R15 on Inner Wing Frames Castering Front and Walk-over™ Tandem Rear with (6) 280/70R15 on Outer Wing Frames |
|||
| Stabilizer wheels |
No basket harrows
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 |
Rolling basket harrow
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 |
Rear hitch
| Tubing size | Rectangular box construction: 7.62x12.7 cm 3x5 in. |
|||
|---|---|---|---|---|
| Telescoping | Yes | |||
| Tongue weight rating | 45.4 kg 100 lb |
|||
| GVW | 10,000 | |||
| Wiring harness for transport lights | includes Y-harness, allowing both the 2430 and towed implement lights to work simultaneously | |||
| Hydraulic hoses and couplers | Available as field attachment |
Warranty
| Description | 3-year frame and standard warranty |
|---|
Additional feature
| Opton 1 | Rear Attachment Options: -Coil-tine Harrow -Hydraulic Knife-edge Rolling Basket |
|||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 | ||||
| Option 4 | ||||
| Option 5 |
Additional information
| Date collected |
|---|
