- UTILITY VEHICLES
- Gator™ Utility Vehicles
- Gator™ UV Attachments
- TOOLS
- Home & Workshop Products
Current software
Expand AllCollapse All
GREENSTAR 3 2630 & GREENSTAR 2 (1800, 2100/2600) DISPLAYS
Release Date: March 2017
Version:
GreenStar 3 System 2630 Update: 3.34.1345
GreenStar 2 System 2100/2600 Update: 2.8.1033
GreenStar 2 System 1800 update: 2.15.1096
GREENSTAR 3 COMMANDCENTER (CONTROLLER UPDATE ONLY)
GENERATION 4 DISPLAY UPDATES (4100/4600/4640)
STARFIRE™ 6000 RECEIVER
Release Notes
Software Installation Instructions
Release Date: August 2017
Version: StarFire™ 6000 Update: 3.70M
ORIGINAL GREENSTAR SYSTEM UPDATE
APEX FARM MANAGEMENT SOFTWARE
Release Date: September 12, 2017
Apex System Requirements
- Processor: Celeron/Pentium 4 or equivalent AMD processor 1.6 GHz minimum
- Operating System: Windows XP 32 Bit with Service Pack 3, Windows Vista 32 or 64 Bit Service Pack 1, Windows 7 32 bit or 64 bit, Windows 8 32 bit or 64 bit, or Windows 10 32 or 64 bit
- Memory (RAM): 1GB minimum, 2GB recommended
- Free Hard Disk space: 20 GB minimum, 60 GB recommended
- Monitor: 19-in.
- Resolution: 1280x1024
- Video Card: 32 MB minimum, 64MB recommended
- Printer: Color Printer
- Modem: 1.5 Mbps or higher Internet speeds
- Card Reader: Internal or external compact flash card reader
Apex 3.8.2 release to address defects.
APPLICATION CONTROLLER 1000 (iGRADE, ACTIVE IMPLEMENT GUIDANCE)
Active Implement Guidance & iGrade application controller starting with version 2.00 software, will require a download to support additional languages.
Release Date: February 2017
Download Directions:
- Verify the file server folder on the memory device is empty.
- Connect a memory device (USB or Compact Flash Card)to the computer.
- Click on the link to download the language files.
- Click Run
- Select the correct drive for the memory device.
- Select Unzip to place the language files on the memory device.
- Remove the memory device from the computer and insert into the display.
- Change the language for the display while the memory device is still connected. Main Menu-->Display soft key-->Settings soft key-->select desired language from the drop down list.
- The memory device must be present to change the language of the Application Controller 1100. If you change the language after you remove the memory device the language of the Application Controller 1100 will revert back to English.
- Clean up controller object pool. Menu-->Message Center soft key-->Cleanup soft key-->select Controllers >select Begin Cleanup.
- Cycle key power.
APPLICATION CONTROLLER 1120 (MOBILE WEATHER, HARVEST ID COTTON, YIELD DOCUMENTATION SPECIALTY CROP)
Application Controller 1120, starting with version 1.00A software, will require a language download to support additional languages.
Release Date: February 2017
Download Directions:
- Verify the file server folder on the memory device is empty.
- Connect a memory device (USB or Compact Flash Card) to the computer.
- Click on the link to download the language files.
- Click Run
- Select the correct drive for the memory device.
- Select Unzip to place the language files on the memory device.
- Remove the memory device from the computer and insert into the display.
- Change the language for the display while the memory device is still connected. Main Menu-->Display soft key-->Settings soft key-->select desired language from the drop down list.
- The memory device must be present to change the language of the Application Controller 1120. If you change the language after you remove the memory device the language of the Application Controller 1120 will revert back to English.
- Clean up controller object pool. Menu-->Message Center soft key-->Cleanup soft key-->select Controllers >select Begin Cleanup.
- Cycle key power.
RAVEN AUTOBOOM®
Release Notes:
Previously, AutoBoom nodes could be updated through a serial interface cable P/N 115-0230-011 or through a Raven field computer. This release of AutoBoom software does not include a serial update interface. The current version of AutoBoom software will need to be loaded through a Raven field computer or a Raven Service Tool P/N 117-0171-464. Damage may be caused to the node if the serial update cable is used.
Release Date: May 2015
RAVEN SMARTBOOM™
Release Notes:
- Fix for Spanish and Portuguese for left/right language switched.
- Fix for Portuguese for Sections spelled wrong
- Change to Setting number of sections, now caps Planter sections to 8 and 4 for Pneumatic and Electric respectfully.
- Fixed bug on menu home screen for some languages.
- Added Translation for Mode and Planter/Sprayer in the System menu.
Release Date: September 2009
FIELD CONNECT™ FIRMWARE UPDATED
Release Date: December 2016
NOTE: Users must insure that the file they transfer to the flash drive does not have any extension added to the file name. This can occur when the file is downloaded and older version of the firmware are still on the computer, Windows will add an extension name to the new file. Correct name is MPFILE.BIN, incorrect naming would be MPFILE(1).BIN.