- Home & Workshop Products
With the RelativeFlow blockage system, operators can see the flow rate of both seed and fertilizer from inside the tractor cab when seeding with the 15.2-m (50-ft) and 18.3-m (60-ft) 1890, as well as the 18.3-m (60-ft) 1895 and the 23-m (76-ft) 1870. Sensors on secondary hoses monitor the relative rate of product flow. An easy-to-read display clearly visualizes relative product flow across the drill, from opener to opener. This exclusive technology gives a better view of what is happening from the cart to the opener in order to spot problems before blockage occurs.
Below are the GreenStar™ 3 (GS3) 2630 Display screens for the blockage monitoring system. For complete details and information, see the owner’s manual.
The RelativeFlow system chart shows the amount of flow through each sensor on the selected tower. Sensitivity for the blockage system can be adjusted if desired, as shown below.
Blockage warning sensitivity allows the producer to set and change the sensitivity of the sensors to meet their preferences. Increasing the sensitivity means the system is more likely to show a false blockage, while less sensitivity means the system is more likely to miss a blockage.
Multiple run-page alarm behavior options are available for selection.
Blockage alarm delays can be set up by clicking on the advanced settings button from the blockage set-up screen.
For more detailed information, see the owner’s manual.
Growers have historically had to make some difficult planting and seeding decisions due to weather. Operators have been forced to plant in wet conditions that are far from optimal in order to plant within the optimum planting window. Those operators have experienced poor performance from wet soils working in between the depth gauge wheel and the opener disk and not having a way out. This creates the possibility of the depth gauge wheel or opener disk to seize up and drag through the soil.
The spoke gauge wheel is a solution for operators who plant in these conditions to allow the mud and debris that get caught behind the depth gauge wheel to easily flow through the wheel and continue providing superior depth performance.
The spoke gauge wheel is designed for optimum performance. Its features include serviceable, stamped inner and outer rims. The wheel also has cast spokes and bearing hubs for increased strength. This allows smaller spokes, creating larger open surface area for mud and debris to flow more easily than competitor’s wheels. Another improvement over the closed gauge wheel is a snap-ring bearing retention. The wheel does not need to be taken apart and the bearing does not need to be pressed out. Simply remove the snap ring, replace the bearing, and place the snap ring back.
Heavy trash fields from no-till environments have also tested very well with the new spoke gauge wheel. Some growers provided feedback of crop residue getting inside and jamming up the gauge wheel and opener. This spoke gauge wheel has shown exceptional performance within these areas as well. These wheels are compatible with both 90 Series openers on seeding tools and planter row-units.
Below is a chart that demonstrates a competitive advantage over MudSmith™ wheels for mud and residue flow:
|MudSmith||John Deere||Percent improvement|
|Open area||329 cm2 (51 cu in.)||471 cm2 (73 cu in.)||43 percent|
|Rim height||1.9 cm (3/4 in.)||1.4 cm (9/16 in.)||25 percent|
|Spoke width||3.5 cm (1-3/8 in.)||1.9 cm (3/4 in.)||45 percent|
The wheel is serviceable along with other parts.
Not compatible in dual gauge wheel applications.
MudSmith is a trademark of MudSmith, LLC.
A digital pressure sensor is located inside of each tank on the C850, enabling a reliable tank-pressure readout on the cart’s side display and the cab of the tractor on the Gen 4 4600 CommandCenter™ display. Seeing the digital readout allows for fine tuning of tank pressure, needed for metering accuracy on fine low-rate commodities.
Adjusting tank pressure is done at the side of the cart using the banjo handles pictured above. The decals in yellow indicate with what tank the handle is associated. The white and black decal has a spectrum of low to high tank pressure for dialing in the adjustment and shows to what primary the air is being mapped. Tank pressure indicators will be shown on the Gen 4 CommandCenter.
The 18.3-m (60-ft) 1895 Disk Drill offers larger mainframe and wing tires with higher floatation, resulting in less overall surface compaction while minimizing emergence issues. All tires on the 18.3-m (60-ft) machine are 207 kPA (30 psi). The mainframe and wing tires are equipped with casters and walking beams to allow for better ground following.
|Wing tire size||Mainframe
|1895||13.1 m (43 ft)||31x13.5-15||31x13.5-15||483 kPa (70 psi)||310 kPa (45 psi)|
|1895||18.3 m (60 ft)||550/45-22.5||33x15.5-16.5||207 kPa (30 psi)||207 kPa (30 psi)|
Setting the opener down pressure is convenient and easy to adjust.
For 9.1-, 11.0-, 12.2-, and 13.1-m (30-, 36-, 40-, and 43-ft) widths the down pressure on the front fertilizer rockshaft is adjusted independently of the middle and rear seed opener rockshafts. Simply dial in the required pressure using the knobs.
The seed opener pressure gauge face is color coded to provide a guide for normal pressure operating ranges.
The valve has two internal checks to reduce possibility of damage to valve when charging the system.
The down pressure cylinder is connected to live hydraulics and extends or retracts to maintain uniform down pressure on openers.
This system is compatible with either closed center or pressure flow compensated tractor hydraulic systems.
IMPORTANT: Tractors with open-center hydraulics require an open-center kit with change valve (order code 6505 to make the air drill compatible). The open-center application does not provide an opener flexibility feature.
This 1895 Disk Drill is 18.3-m (60-ft) wide, which means 40 percent more working width over the current 13.1-m (43-ft) model. This gain in working width can save up to nine passes per quarter section during the same amount of time spent in the tractor cab.
An increase in productivity positively contributes to agronomics. Improving a grower’s productivity will increase the likelihood of hitting the seeding window while minimizing the chance for yield declines.
The opportunity for the 18.3-m (60-ft) 1895 model compared to the 13.1-m (43-ft) model is a $1,500 gain in wheat yield and $2,700 gain in canola yield from increased productivity. The productivity gain for the 18.3-m (60-ft) 1895 paired with a C850 Air Cart can save a grower up to nine passes per quarter section. Overall, this drill was designed for productivity and efficiency.
The 5-degree fertilizer opener:
There are four choices of interchangeable fertilizer tubes:
A) Dry fertilizer tube to be used with 32-mm (1-1/4-in.) secondary fertilizer hose from the 1910 Commodity Cart.
B) Liquid fertilizer tube (for 13-mm [1/2-in.] i.d. hose).
C) Dual fertilizer delivery tube. Allows for placement of dry OR anhydrous. If applying both simultaneously, the operator may need to provide a relief system to relieve air from dry tube for adequate anhydrous retention. Without air relief, the operator will need to adjust air plenum to restrict all airflow to SFP dry tubes when anhydrous is being applied.*
D) Anhydrous tube (for 10-mm [3/8-in.] i.d. hose).*
*Liquid or NH3 fertilizer metering/delivery system is not provided by the John Deere Seeding Group.
Key features of the SFP opener are:
The 25-mm x 305-mm (1-in. x 12-in.) cast closing wheel follows the press wheel to close furrow, placing soil over seed or fertilizer after the press wheel secures seed in furrow.
NOTE: The closing wheel is optional on the fertilizer openers.
114.3-mm x 406.4-mm (4.5-in. x 16-in.) semi-pneumatic wheel gauges depth.
76.2-mm x 406.4-mm (3-in. x 16-in.) gauge wheel (optional)
The 18.3-m (60-ft) 1895 Disk Drill has five sections with 254-mm (10-in.) spacing and is Air Power™ 2 compatible. This larger tool will require a 15,152.8-L (430-bu) tow-between cart, a 15,152.8-L or 19,381.5-L (430-bu or 550 bu) tow-behind cart, or the C850 Air Cart with Air Power 2 dual fan system. Along with this cart compatibility, below is the tractor, horsepower, display, and engine compatibility details.
Along with the added tool size, the 1895 offers a heavy-duty hitch to pull an additional 20,412 kg (45,000 lb), which is the equivalent of two 7571-L (2,000-gal.) NH3 tanks when using a tow-between cart.
This larger tool was designed for the Gen 4 CommandCenter™ display. This technology integration saves time and money.
TruSet downforce control enables operators to conveniently set values for the seed and fertilizer ranks independently from the cab. This feature enables them to meet optimal downforce pressure while in varying soil conditions. TruSet downforce control improves seed placement accuracy in varying field conditions, leading to improved emergence and plant maturity.
TruSet system quick-reference guide image key:
Select the tool setup to enter calibration screens, input downforce setpoints, and to verify the tractor SCV controlled by automation:
TruSet system tool setup - automated SCV image key:
TruSet system tool setup - manual SCV image key:
TruSet system tool setup - Implement Detection image key:
TruSet system tool setup - opener configuration image key:
90 Series Single-Disk No-Till Openers are in base equipment on all 1890 and 1895 Separate Fertilizer Placement (SFP) and 1990 Central Commodity System (CCS™) Air Drills.
On the 1890 models, the single-disk openers are on 190-mm (7.5-in.) or 254-mm (10-in.) row spacing. On 15.25-m (50-ft) and 18.30-m (60-ft) 1890s, the 190-mm (7.5-in.)/380-mm (15-in.) or 254-mm (10-in.)/508-mm (20-in.) dual-row spacing feature is in base equipment. The single-disk openers provide consistent and accurate seed placement.
The single-disk openers are gang mounted and are hydraulically raised and lowered. The hydraulic downforce system also offers a wide range of downforce settings for the openers.
The active hydraulics:
The down pressure:
NOTE: For additional ballast in hard-to-penetrate conditions, tractor suitcase weights may also be added to the mainframe and wings to obtain maximum down pressure per opener.
The 90 Series No-Till Openers:
The heavy-duty frame is built for years of use seeding over large acreages and rolling fields. The weight of the five-section frame enhances the capability to pull more behind the toolbar. It is compatible with the C850 Air Cart plus 7571-L (2000-gal.) twin anhydrous tanks. The durability of the frame has been improved to handle this fully loaded machine weighing 28,848 kg (63,600 lb). It includes a rear hitch for the C850 plus inner and outer wing weight brackets that can hold five suitcase weights on each inner wing plus two suitcase weights on each outer wing.
The 1895 Separate Fertilizer Placement (SFP) offers the 7-degree fertilizer openers as standard equipment.
The 7-degree opener:
The optional 5-degree opener:
IMPORTANT: Do not apply NH3 without the closing wheel.
The 7-degree openers have several other features:
The 114.3-mm x 406.4-mm (4.5-in. x 16-in.) semi-pneumatic wheel gauges depth.
The 76.2-mm x 406.4-mm (3-in. x 16-in.) gauge wheel (optional):
NOTE: Fertilizer openers do not have a press wheel.
The 25.4-mm x 304.8-mm (1-in. x 12-in.) cast closing wheel follows the press wheel to close the furrow, placing soil over the seed or fertilizer after the press wheel secures the seed in the furrow.
NOTE: Closing wheel is optional on fertilizer openers.
Enhanced air seeding performance would not be possible without the updates to the 15,152.8-L (430-bu) and 19,381.5-L (550-bu) 1910 and C850 Air Carts. For the wider seeding width, more fan capacity has been added.
Air Power 2 provides two independently controlled fans – one for seed and one for fertilizer. Along with large, 76.2-mm (3-in.) primaries, more accurate delivery rates are possible across the full width of the seeding tool, from opener to opener. Plus, Air Power 2 allows growers to deliver high rates under field operating conditions – up to 40 percent more product delivery per primary compared to the single-fan system.
Dual fans are required for tow-between and tow-behind carts on the 23.2-m (76-ft) 1870 and 18.3-m (60-ft) 1895 models along with the eight primaries. Each fan will direct air to one set of primaries. Two selective control valves (SCVs) are required for the fans. The fan speed will be controlled through the SCV flow control.
Air Power 2 will also be compatible with the current 17.1-m (56-ft) and 23.2-m (76-ft) 1870 Air Hoe Drills, as well as the 18.3-m (60-ft) and 13.1-m (43-ft) 1895 Disk Drills, plus the 15.2 (50-ft) and 18.3-m (60-ft) 1890 models. An option is available for stainless-steel primaries to resist corrosion from high fertilizer rates.
There is a slide at the meter to choose bottom or top shoot for each meter. There is also a valve on the tank pressure system to choose top or bottom shoot. This same valve is used to adjust the amount of air to the tank to create the proper pressure differential.
The arrow on the valve handle should be pointing to the top of the range for the top shoot and the bottom of the range for the bottom shoot. If the tank will not be in use, set the pressure valve to the middle setting to not pressurize the tank. The operator should use the gauge to find the correct setting. An electronic pressure sensor will send a warning to the display if the tank pressure differential is out of range.
If pressure is in the green operating range, the tanks are sealed and operating correctly. The electronic pressure sensor is located behind the mechanical gauge on the side of the cart.
Specs & Compare
|Select up to 4 models to compare specifications||
Separate Fertilizer Placement (SFP) Air Drill
|Working widths||18.3 m
|Spacing||Seed spacing - 254 mm
Separate fertilizer - 508 mm
|Number of ranks||Two seed ranks and one separate fertilizer rank|
|Number of sections||Three|
|Transport height||5.2 m
|Transport width||5.7 m
|Road clearance||21.59 cm
|Overall length||11.6 m
|Centerframe width||4.55 m
|Weight before ballast||28,213 kg
|Available ballast||1,451.5 kg
102 x 152 mm
4 x 6 in.End tubes
51 x 152 mm
2 x 6 in.Hitch
152 x 254 mm
6 x 10 in.
|Clearance from rank to rank||134.1 cm
|Mainframe standard||(8) 42.1x 21.7x 22.5 in. 12PR|
|Mainframe bolt pattern||Duals with eight-bolt wheels|
|Wings standard||(16) 33x15.5-16.5 in. 10PR|
|Wings bolt pattern||Duals with eight-bolt wheels|
|Style||ProSeries™, single disk blade - 45.7 cm
Fertilizer, single disk blade - 45.7 cm
|Rank lock-up||Front, middle, and rear|
Seed at 7 degree (angle)
Fertilizer (dry only) at 5 or 7 degree (angle)
Single blade with beveled edge
Active hydraulic downforce10-in. space
75 to 181 kg
165 to 400 lb
Standard - 11.43 x 40.64 cm
4.5 x 16 in.
Narrow gauge wheel - 7.62 x 40.64 cm
3 x 16 in.Range
1.27 to 8.89 cm
0.5 to 3.5 in.Increments
|In-Furrow press wheel||Material
Rubber-face press wheelPacking force
2.3 to 21 kg
5 to 45 lb
1.8 x 25.4 cm
0.71 x 10 in.
Closing wheel - vertical 15 degree (angle)Size
2.54 x 30.48 cm
1 x 12 in.Material
Cast ironDown force
12 to 20 kg
26 to 43 lb
|Double-Shoot capable||Yes - front ranks apply fertilizer|
Allows addition of up to six tractor suitcase weights on each wing.
NOTE: Wing weights and markers are not compatible.
This pilot-operated check valve traps oil to opener cylinders, maintaining pre-set pressure when tractor valve is neutralized.
This kit is required if the tool will be connected to tractors with open center hydraulic systems. If the tractor valve is not neutralized on open center tractors, damage will result to the tractor (heat build-up in the hydraulic system).
The kit includes the check valve, pilot line, and necessary hydraulic fittings for installation.
The spare tire mounting bracket will be installed at the factory if ordered with the machine and will accommodate mainframe tire and wheel sizes.
Hardware is supplied with the bracket to attach it to the frame if ordered as an aftermarket bundle.