DB90 54Row20Planter
- 54-row planting width on 90-ft toolbar
- 20-in. row spacing
- Available in ExactEmerge™, MaxEmerge™ 5e row units
- 5-section frame
Features
Expand AllCollapse All
Planter auxiliary camera
Adjustable magnetic camera mounting bracket
Integrated 56V Tractor Power Tether Harness
Integrated 56V Tractor Power Tether Harness hook up to model year 2027 and newer EVT tractor
G5 display shortcut bar buttons for Downforce Automation
Optimizing
Stable Setting
Reoptimize (for Speed)
FurrowVision technology
Downforce - Comparing furrow formation via the FurrowVision video feed
Residue - Comparing residue presence via the FurrowVision video feed
Depth - Comparing target depth (e.g., 2.5 in) to actual depth readings across the Left, Center, and Right sections
FurrowVision run page on G5 display
Planter Summary Run Page with Residue Analysis ON
FurrowVision Imagine Processing Module (IPM)
FurrowVision camera module location
EasyStart simplifying planter startup
Walking Tandem Center Wheels improve ground following
Picture of the liquid fertilizer level sensor
View cumulative fertilizer tank levels on both 8RX ExactRate tanks and planter liquid fertilizer tank levels on the G5 CommandCenter Display
CCS tank levels displayed in the SeedStar™ application
Customizable tank level alarms - view tank 1, tank 2 and total seed volume on G5 Display
1775NT 24Row with frame weight distribution
Hydraulic cylinder mounted on planter wings for frame weight distribution
Accumulator is mounted near the air compressor to absorb any spikes of pressure
SeedStar™ 5 Frame Weight Distribution in-cab adjust
SeedStar 5 screen example
Yield loss after optimum planting day
Maintenance-free BrushBelt system
BrushBelt conditioner engages brush bristles
Brush proximity helps clean sensor
Sensors for trench delivery system
Reflective seed sensor
Sensor on trench delivery system
BrushBelt removed from trench delivery system
Liquid tank mounted on a 24-row 1775NT Planter
Liquid Tank mounted to a 24-row 1775NT Planter
Row Runoff diagnostic test
The test functions from a mobile device
Determine optimum settings without being in the cab
IRHD system
IRHD screen showing the ground contact graph
IRHD screen showing the applied downforce graph
IRHD accumulator
Downforce and margin example
Active downforce compressor assembly
Air compressor mounted on 1775NT outer hitch
Pneumatic downforce compressor and gauge
Heavy-duty adjustable downforce spring
Coulter combo row cleaner
Easy Adjust row cleaner
4600 CommandCenter™ Display and 4640 Universal Display view for row cleaners compatible with SeedStar 4HP
G5 Universal Display for row cleaners compatible with SeedStar 5HP
Curve compensation with planters
Screw-adjust, unit-mounted row cleaner
Floating row cleaner with unit-mounted coulter
Connected Support technology
Increase visibility with planter auxiliary camera
Planter auxiliary camera
The planter auxiliary camera utilizes an adjustable magnetic mounting base. This allows customers the ability to move and adjust the field of view to see what’s most important to them.
- Camera is integrated into the SeedStar™ 5 planter Ethernet system, video is streamed to the CommandCenter™ display
- Camera is mounted to an adjustable magnetic base allowing customers full adjustability of their field of view
- Configurable with existing programmable video triggers
- Compatible with model year 2025 and newer SeedStar 5 planters and performance upgrade kits
- Mirror image view and adjust field of view from the video app on the G5 CommandCenter™ display
Adjustable magnetic camera mounting bracket
Integrated 56V Tractor Power Tether Harness
Integrated 56V Tractor Power Tether Harness
Overview
The Integrated 56V Tractor Power Tether Harness simplifies the tractor-to-planter connection process while leveraging the power generation capabilities of Model year 2027 and newer 8 series tractors with an EVT transmission and the 56V (15kw) integrated Electric Power Generation option. Available for MY27 electric drive planters, the 56V harness reduces complexity and improves operational efficiency by eliminating the need for PTO-driven power generation to operate planter functions.
Benefits
- Quick, hassle-free tractor/planter hookup without PTO power generation.
- Reduced maintenance needs compared to PTO power generation
- Enables “Auto EPG” that can automatically turn on/off the EPG to improve the operator experience
Additional details
Integrated 56V Tractor Power Tether Harness hook up to model year 2027 and newer EVT tractor
The Integrated 56V Tractor Power Tether Harness is only compatible with Model year 2027 and newer 8 Series Tractors with an EVT transmission and the 56V (15kw) integrated Electric Power Generation option.
Electric drive planters with PTO power gen that match with the compatibility table below can be fitted with an aftermarket parts kit to enable the 56V harness if that planter will be connected to a Model year 2027 and newer 8 Series Tractors with an EVT transmission and the 56V (15kw) integrated Electric Power Generation option. The 56V Tractor Power Tether Harness is not compatible with hydraulic power generation systems and is only able to replace current PTO power generation systems. A software update will be required after changing from PTO power gen to the 56V Power Tether Harness. Aftermarket parts kit numbers will be released before the MY27 Planter EOP in June of 2026.
Planter Compatibility
The following models are compatible with the Integrated 56V Tractor Power Tether Harness
Model |
Model year |
1775NT 2 Point |
Model year 2018-current |
1775NT Drawbar |
Model year 2018-current |
DB60 36R |
Model year 2018-Model year 2024 |
DB60 36R |
Model year 2025-current |
DB90 36R |
Model year 2018-Model year 2024 |
DB90 36R |
Model year 2025-current |
All other DB's (except above) 36+ Rows |
Model year 2018-current |
All other DB's (except above) <= 36 Rows |
Model year 2018-current |
1725C Mounted |
Model year 2025-current |
1725C Mounted |
Model year 2023-Model year 2024 |
1795 2 POINT HITCH |
Model year 2018-current |
1795 DRAWBAR |
Model year 2018-current |
Downforce Automation powered by FurrowVision™
G5 display shortcut bar buttons for Downforce Automation
Why does Downforce Automation matter?
What is the right downforce setting to use when planting? Does the best setting change field to field? Does it change within a field? There are so many questions around this crucial planter setting that seem to not have an answer.
Here’s what we do know:
- Downforce settings matter and have an impact on yield.
- Most planter operators never change downforce within a field or even field to field.
- Each field is unique, variable and requires the right downforce setting to optimize depth and seed to soil contact without compacting the furrow.
- Stopping to dig and set downforce takes time and a skilled operator to get it right
- Current hydraulic downforce systems adjust applied downforce to maintain the same margin target. But different margin targets are needed multiple times in each field to optimize furrow formation.
What is Downforce Automation powered by FurrowVision?
Downforce Automation powered by FurrowVision optimizes downforce settings in real time to improve furrow quality across every field condition. By evaluating Ground Contact, Soil Resistance, and Furrow Health (via FurrowVision), the system determines the ideal amount of applied downforce for each environment. This removes the need for operators to manually adjust settings from field to field and ensures more consistent furrow formation and seed placement.
How does Downforce Automation work?
The system will start from the last downforce setting input in the monitor and take time to evaluate different settings to optimize the furrow. Once optimized, Downforce Automation will continually test different downforce settings to ensure the best outcome by adjusting how much downforce is applied by 5 – 10 lbs at a time. As planting continues in a field, Downforce Automation will re-optimize settings at regular intervals or changes in planting conditions, seeding depth, soil type, or planting speed for example, may trigger a re-optimization event. In a normal 60–80-acre field, there will be 4 different downforce settings on average identified by the system.
Optimizing
Stable Setting
Reoptimize (for Speed)
Planter Compatibility
Downforce Automation is available on any planter equipped with FurrowVision. See FurrowVision compatibility for a list of specific planter models
FurrowVision technology
What used to involve digging behind the planter to verify seed depth, observe side-wall quality, and ensure row cleaners were set properly can now be done from the seat of your cab while you continue to plant.
FurrowVision technology gives operators real-time analysis and video of the open section of the furrow between the TruVee openers and closing system.
The FurrowVision system provides:
- Live camera feed from three different rows of open furrow on G5 display
- Confirmation of planting depth through a measured Depth metric in cab and in a Depth layer available in the John Deere Operations Center
- Identification of residue in or near the furrow as a percentage that helps adjust row cleaner settings from the cab
- Visual confirmation of furrow formation and enables Downforce Automation capability
Agronomic benefits:
- Downforce – Looking at images from FurrowVision can help identify where and when downforce is being overapplied or underapplied. This helps you set your crop up for success and protect your yield potential.
- Residue – Looking at images from FurrowVision can help identify where and when row cleaner settings should be adjusted to create a cleaner furrow. Residue in the furrow can delay emergence and lead to yield loss.
- Depth – Looking at the depth measurements provided by FurrowVision creates opportunities for on-the-go planter adjustments to achieve target depth more consistently. Planting too shallow can significantly reduce yield.
Downforce - Comparing furrow formation via the FurrowVision video feed
Residue - Comparing residue presence via the FurrowVision video feed
Depth - Comparing target depth (e.g., 2.5 in) to actual depth readings across the Left, Center, and Right sections
FurrowVision run page on G5 display
- Residue reading – See how much of the furrow is covered by residue (as a percentage)
- Furrow cameras – Switch between left, right, and center video feeds
- Depth – Actual depth reading reported by FurrowVision
- Status Indicator – Green dot means the system is working properly and able to read depth
- Residue analysis – Turn this feature on to highlight residue on live camera feed
- Video – Live camera feed of open furrow
Planter Summary Run Page with Residue Analysis ON
FurrowVision Imagine Processing Module (IPM)
FurrowVision camera module location
EasyStart simplifying planter startup
EasyStart simplifying planter startup
Overview
EasyStart is a software feature that streamlines the planter startup process by providing a guided workflow on a single screen accessible with a shortcut bar button. Instead of navigating multiple run pages, operators follow a step-by-step process that automatically detects planter equipment and populates all necessary pre-plant tasks. This simplifies setup and gets you planting faster. Once planting, all your commonly used on/off buttons remain easily accessible in one place in the shortcut bar.
Benefits
- Reduces time from entering the field to planting the first seed.
- Consolidates all pre-plant tasks into one convenient screen.
- Guided steps remove guesswork and ensure nothing is missed.
- Minimizes downtime and maximizes planting efficiency.
- Automatically detects planter equipment and populates correct startup steps.
- Frees up run page space by allowing quick access to frequently used buttons via the shortcut bar.
Planter Compatibility
- EasyStart is compatible with all Seed Star 5 configurations
Walking Tandem Center Wheels on DB’s
Walking Tandem Center Wheels improve ground following
Overview
Walking Tandem Center Wheels improve planter ground following by replacing traditional solid axle center wheels with a tandem design that distributes weight more evenly across the soil surface. This design helps reduce berming at field headlands and improves planter performance in challenging conditions by maintaining more consistent ground contact across the center of the planter.
Benefits
- Improves ground following and reduces berming at headlands for smoother field transitions.
- Even ground pressure allows planting in wet areas that would normally be avoided with solid axle designs
- Improves crop emergence in pinch rows
- Enhances consistency across the planter by reducing center‑section bounce and variability.
Planter Compatibility
All DB planters will now have Walking Tandem Center Wheels in base from the factory
Improve liquid fertilizer tendering logistics with fertilizer level sensors
Picture of the liquid fertilizer level sensor
Liquid fertilizer level sensing is available on model year 2026 electric drive planters.
Fertilizer level sensing allows farmers to know how much liquid fertilizer is left in the tank from the convenience of the cab. The fertilizer level is displayed on the G5 CommandCenter™ Display in the SeedStar™ app.
- Better coordinate fertilizer tendering plans by knowing how many total gallons of liquid fertilizer are left on the planter.
- See total gallons of liquid fertilizer left on both planter and tractor if tractor is equipped with ExactRate™ tractor tanks.
- Enables customizable low fertilizer tank level warning alarms to prevent running out of liquid fertilizer.
- Fertilizer tender drivers and farm managers can remotely view fertilizer tank levels from a smart connected device using the John Deere Operations Center™ mobile app.
- Removes the need for the operator to manually set the fertilizer tank volume and enter the specific gravity.
View cumulative fertilizer tank levels on both 8RX ExactRate tanks and planter liquid fertilizer tank levels on the G5 CommandCenter Display
Improve seed tendering logistics with CCS™ tank level sensors
CCS tank levels displayed in the SeedStar™ application
Seed level sensing is available on all model year 2026 electric drive planters equipped with Central Commodity System (CCS) tanks operating on the SeedStar™ 5 planter application.
Seed level sensing gives farmers better knowledge of planter seed levels. This reduces the risk of running out of seed while planting also allowing farmers to better manage seed tendering logistics to have the seed in the right place at the right time.
View individual and total tank levels from the G5 CommandCenter™ display in the SeedStar app:
- Better plan tendering logistics with seed volume or seed percentage remaining
- Remotely view seed tank percent levels from your computer using John Deere Operations Center™ or from your connected smart device using the John Deere Operations Center mobile app
- Individual tank level displayed helps farmers prevent one tank emptying before the other
- Enables customizable low seed tank level warning alarms
Customizable tank level alarms - view tank 1, tank 2 and total seed volume on G5 Display
Frame weight distribution
1775NT 24Row with frame weight distribution
Hydraulic cylinder mounted on planter wings for frame weight distribution
As planters get larger and more customizable, there is more weight being carried by the center mainframe. This presents the possibility that weight may not be distributed evenly along the width of the planter frame during planting in certain circumstances. Some studies have shown there could be a potential yield loss of 70.5 L (2 bu) per acre in certain soil conditions from unequal weight distribution with more weight being on the center of the planter. The option has been added to have hydraulic cylinders mounted onto the frame of the planter that redistribute weight from the center of the planter to the rest of the tool bar.
Accumulator is mounted near the air compressor to absorb any spikes of pressure
The frame weight distribution can be enabled or disabled on the G5 CommandCenter™ or Universal Display with SeedStar™ 5 on MaxEmerge™ 5e or ExactEmerge™ equipped planters. On model year 2025 planters and newer, SeedStar™ 5 provides the capability to adjust frame weight distribution from the cab.
SeedStar™ 5 Frame Weight Distribution in-cab adjust
The system utilizes the tractor’s power beyond feature with load sense. Frame weight distribution is activated by the height switch, providing equal weight distribution at all times. In the scenario where a planter is equipped with frame weight distribution and onboard power generation for electric drives, there will be an orifice that directs hydraulic flow to fulfill the power generation requirement first and then provide oil to frame weight distribution.
On Model Year 2025 planters and newer, frame weight distribution can be adjusted from the cab on the G5 display. The system does not have active adjustment capabilities. When the planter is raised on headland turns, the system maintains pressure to the outside wings for a period of time to keep the system engaged to make the turn and reduce center frame tire weight on headlands.
IIn-cab adjust available on the following models with ExactEmerge or MaxEmerge 5e row units: all 1775NTs, 1795 24R20, 1795 31R15, 1795 32R15, DB44 24R22, all DB60s, DB66 36Row22, DB80 48R20, DB80 32R30, DB88 48R22, DB90 36R30 and DB90 54Row20. Frame weight distribution on models with MaxEmerge 5 will need to be manually adjusted from the valve block under the CCS tank.
SeedStar 5 enables new planting technology
SeedStar 5 screen example
Overview
SeedStar 5 is the latest monitoring software for John Deere planters available for Model Year 2025. This system is paired with G5 displays and Implement Ethernet to provide high-definition documentation, faster data speeds, and more information in the cab.
Benefits
- Faster data speeds
- High Definition (5Hz data) documentation
- Enables new technology like ExactShot and FurrowVision
- Building block for future planter automation
Additional details
Requirement:
- G5 Display
- Planter Implement Ethernet (included on model year 2025 planters)
- Building block for future planter information
Increase productivity with ExactEmerge™ trench delivery system and BrushBelt™ delivery system
It is very challenging to get the crop planted during the optimum planting window or as close to the optimum planting day as possible. Rate-of-yield loss accelerates greatly after the optimum window has passed. This is especially true in the northern U.S. and Canada. ExactEmerge maintains accurate speed placement at higher speeds; growers can avoid missing that peak planting time, thereby helping to get the highest crop yields.
Yield loss after optimum planting day
With the BrushBelt trench delivery system, the spacing in the trench does not change from even to uneven terrain. This can be a problem with a traditional seed tube. Seed bounce and ricochet may occur as slopes increases, ultimately decreasing seed spacing performance.
The design of the BrushBelt system provides the best solution for the lowest release of seed to the bottom of the trench. The use of a brush provides the meter with an infinite amount of placement opportunities for each seed. This is what gives producers the confidence that every seed will have the desired spacing that a seed tube cannot provide.
Maintenance-free BrushBelt system
When the brush comes around the pulley, it expands and allows the seed to be transferred from the bowl to the brush very easily. The brush then carries the seed down toward the trench, ensuring that there is no movement as it moves down the length of the cartridge.
Once the brush reaches the lower pulley, the BrushBelt system expands again to loosen the grip on the seed, and the centrifugal force releases the seed. Another advantage with the BrushBelt system and cartridge at all speeds up to 16.1 km/p (10 mph) is the ability to match the seed rearward trajectory to the forward ground speed of the planter. This provides a dead drop of the seed with no bounce and no roll at the bottom of the trench.
BrushBelt conditioner engages brush bristles
John Deere’s ExactEmerge cartridge is self-cleaning. When an operator uses seed treatments or is forced to plant in less than ideal soil conditions, the design of the trench delivery system sheds buildup from the BrushBelt. A brush conditioner is located at the bottom of the cartridge to remove remaining residue and prevent the bristles from sticking together.
Brush proximity helps clean sensor
Another advantage over a seed tube is that the BrushBelt system also acts as a cleaner to the seed sensor compared to a seed tube.
Sensors for trench delivery system
Reflective seed sensor
Sensor on trench delivery system
On all ExactEmerge row-units, each cartridge is equipped with sensors. As the seeds are being delivered through the BrushBelt delivery system controls, they pass the reflective seed sensor. The delivery system slides every seed past the seed sensor to read and send the signal to the controller. The seed sensor and design can provide sensor performance at higher seeds per second with no population adjustment as needed with seed tube sensors. This seed sensor data is actual row-unit performance data. In comparison, seed tube sensors add 10 percent population in soybean planting to adjust for the seeds missed due to placement within the seed tube. The BrushBelt system holds each seed in place until released in the trench, allowing the seed sensor a more accurate read.
BrushBelt removed from trench delivery system
The BrushBelt system requires no maintenance and has a wear life designed to match the wear life of the other wear components. Since operations vary, as do soils and field content, it is recommended to replace the BrushBelt after noticeable wear or decreased performance.
Changing the belt is easy. One latch removes the meter over the trench delivery system. Grab the cartridge by the grip and pull toward the body, releasing it from the electric motor fitting. Lift the trench delivery system up and remove the sensor wiring harness to completely pull the cartridge out of the row-unit.
There are two plastic covers that snap off to uncover the belt; remove the covers and then twist the circular spring tensioner dial with the yellow arrow on it to release the tension on the springs. Once tension has been removed, pull the belt out. It is also recommended to change the stainless-steel wear strip at this time as well, which also slides right out of place without the use of tools.
NOTE: It is recommended to use a talc/graphite mixture with ExactEmerge. Best results have been 80 percent talc and 20 percent graphite. For certain regions and territories, talc and talc/graphite mixes are restricted from use; in this case, use a wax-based fluency agent.
Easily carry fluid on the planter with liquid tanks
Liquid tank mounted on a 24-row 1775NT Planter
John Deere factory-installed liquid tanks offer a convenient way to carry fluid on the planter frame. Styling cues match the CCS™ system tanks, and all brackets and mountings are 100 percent factory installed.
- Factory installed
- Up to 2271 L (600 gal.) of fluid capacity
- Clear sight tube to check fluid level
- Air bleed and overflow protection
Liquid Tank mounted to a 24-row 1775NT Planter
DB fertilizer options
Option code 2625 – Liquid fertilizer with row-unit mounted in-furrow applicator:
- This option contains a ground driven pump, plumbing to a manifold, and routing to each row-unit. The in-furrow applicator places fertilizer after the seed and before the closing wheels.
The DB60 24Row Split 47 Planter and DB60 24Row Split 48 Planter applies fertilizer on 76.2-cm (30-in.) row spacing only.
Mobile row-unit runoff
Row Runoff diagnostic test
The test functions from a mobile device
Determine optimum settings without being in the cab
The first day of planting season can be as productive as the last with mobile row-unit runoff. The mobile row-unit runoff activation on the planter main controller (PMC) allows operators to make adjustments to maximize row-unit performance from a mobile device at the rear of the planter for both preseason and in-season use - all enabled through the Equipment Mobile app.
Mobile row-unit runoff allows growers to perform test-stand functions from a mobile device connected to the planter.
The row runoff test provides complete diagnostic checks both preseason and in season. With the row-unit runoff test, the operator can make adjustments from the mobile device, including vacuum pressure, to determine the optimum meter and vacuum settings. This app functionality will help avoid making trips to the cab while validating meter performance.
During preseason planter inspections and set up, utilize the meter performance test to validate meter accuracy, similar to a test stand without leaving the farm. Test all systems on the planter, not just the meter, providing confidence that all planter systems are ready to plant. Reports are generated from the test providing information the operator can save and send for future reference.
Before heading to the field, the operator will benefit from knowing the best row-unit and vacuum settings for each variety selected to plant that spring.
Watch this video to see mobile row-unit runoff in action.
Mobile row-unit runoff will work with any model year 2015 or newer ExactEmerge™ or MaxEmerge™ 5e equipped planter. Mobile row-unit runoff can be added with attachment AA93169.
For model year 2018 and newer ExactEmerge planters, mobile row-unit runoff is included in base equipment. For model year 2020 and newer MaxEmerge 5e planters, mobile row-unit runoff is included in base equipment. For planters not equipped from the factory, mobile row-unit runoff can be added with attachment AA93169. A mobile row-unit runoff and Easy Fold package can be added with attachment AA97849 (only available with 1775NT and 1795 Planters with a 2-point hitch and model year 2019 and newer DB Planters with Gen 4 based frame folding).
NOTE: Mobile runoff utilizes the Equipment Mobile app available on select iPad® tablets, iPhone® smartphones, and Android™ devices.
Mobile row-unit runoff and Easy Fold aftermarket for field conversion kits
The below software bundles include the functionality explained above for machines not ordered with the feature from the factory. Compatible machines include all the necessary sensors and harnesses needed to make the feature function. The attachment part is software only. Follow the mobile runoff ordering and software push guide below for ordering and installation.
SeedStar™ 3 HP conversion to SeedStar 4HP
Mobile runoff ordering and software push guide
iPad and iPhone are trademarks of Apple Inc. Android is a trademark of Google LLC.
Downforce system options
Individual Row Hydraulic Downforce (IRHD)
IRHD system
IRHD has been specifically designed to meet the needs of producers that are looking to adjust to the toughest field conditions and provide maximum yield potential from field to field, season after season. IRHD works as a closed-loop downforce system that reacts quickly on an individual row basis to changing soil conditions supporting increased ground contact, which can lead to improved seed depth consistency. When setting planter downforce margin, the system will apply the needed downforce by row to maintain ground contact.
The system allows operators to maintain gauge wheel ground contact leading to desired seed depth placement. IRHD can adjust five times per second and make adjustments of 45.4 kg (100 lb) in less than a second. The system has a total range of applied downforce from 22.7 kg (50 lb) to 204.1 kg (450 lb) and utilizes the power beyond circuit on the tractor. IRHD is 58 percent faster than the active pneumatic downforce solution. Fast reaction and increased ground contact can lead to improved emergence. With uniform emergence, some studies have shown a yield impact from 5 percent to 9 percent.
IRHD is controlled through the G5 Display with SeedStar 5. As shown below, operators can view ground contact or applied downforce using the toggle button.
IRHD screen showing the ground contact graph
IRHD screen showing the applied downforce graph
IRHD accumulator
IRHD accumulator
The IRHD actuator is the foundation of ensuring accurate seed depth and seed-to-soil contact at higher planting speeds up to 16.1 km/h (10 mph). The newly redesigned IRHD actuator was designed with durability and optimal performance in mind. Consisting of a valve, pressure sensor, cylinder, and now, two accumulators, the new design allows the operator to reduce downtime with recharges instead of replacements. With two rechargeable nitrogen accumulators built into the new IRHD actuator, it maintains performance, even at low nitrogen levels. This allows reduced downtime for the operator, and optimal performance over entire operating range. Pressure control from the IRHD actuator ensures optimal system performance by dampening shocks from field obstacles while operating in the field. The reduction of shock loads prevents excessive wear and broken row unit components due to the new robust and durable design. Frequently worn parts such as the accumulator pistons and seals can be replaced. The actuator rod has an internal retention feature to prevent oil loss in the event of a row unit failure.
Heavy-duty parallel arm for IRHD Planter row units available
Downforce and margin example
- A - Margin – amount of additional downforce applied to a row-unit above and beyond what is required for penetration to achieve planting depth. This additional weight will ride on the depth gauge wheels.
- 54.4 kg (120 lb) + 36.3 kg (80 lb) = 90.7 kg (200 lb) – 68 kg (150 lb) = 22.7 kg (50 lb) of margin
- B - Weight of row-unit - 54.4 kg (120 lb)
- C - Downforce – force that is applied to the row-unit by the air bag circuit - 36.3 kg (80 lb)
- D - Resistance from soil - 68 kg (150 lb)
Active downforce compressor assembly
A hydraulically driven compressor works with the G5 Display with SeedStar 5 systems to automate downforce control. Just set the row-unit target margin value and the active pneumatic downforce system works automatically. The system will make sure the planter maintains this value, achieving precise soil penetration, and consistent planting depth, without sidewall soil compaction. From the factory, the system is set at 45.4 kg (100 lb) target downforce margin but may be modified for varying field conditions. This frees the operator from constantly making manual downforce adjustments as conditions change.
This system offers a split-rank control feature for 1795 and DB Split-Row Planters. On split-row planters, active downforce will control the front and rear rows independently. This compensates for differing downforce requirements between the ranks that can be caused by things like different tillage or insecticide attachments and will help maintain an accurate planting depth and consistent margin across all the rows.
Active pneumatic downforce is available as factory installed or as an attachment for field conversion.
Set point row-unit downforce
Air compressor mounted on 1775NT outer hitch
On set point, the air compressor will be mounted on the outer hitch or frame assembly. Since the electric air compressor assembly is mounted on the outer hitch (as noted in the picture above) or frame, adjustments for row-unit downforce and related system pressures will be made electronically with the display.
When adjusting the amount of row-unit downforce using the display, the operator will select the amount of downforce (kg [lb]) to be applied across the planter. Depending on the soil conditions at hand, the operator might need to adjust the relative amount of row-unit downforce being applied during the planting operation. The integrated pneumatic downforce controls within the display will only allow for set-point operation and not automatic control as the planter is operating in different soil conditions. The pneumatic downforce system does not have the capability to automatically adjust downforce.
Pneumatic downforce provides convenient, simple adjustment of downforce for the whole planter from one location. The amount of downforce applied is infinitely adjustable from 6.8 to 181.4 kg (15 to 400 lb). Pneumatic downforce provides more consistent downforce throughout the range of row-unit travel than mechanical spring downforce systems.
Features include:
- 9.5-mm (3/8-in.) air delivery line instead of the 6.4-mm (1/4-in.) line used on model year 2010 and older planters.
- Air compressor assembly increased duty cycle. With this compressor, it provides a 47 percent increase in maximum air flow delivery compared to the prior air compressor.
- Pneumatic air bags with 9.5-mm (3/8-in.) air line inlets that have greater durability.
Pneumatic downforce compressor and gauge
An improved compressor is used to charge the pneumatic system. This compressor can be located on the planter frame or in the tractor cab if desired. A gauge at the compressor indicates the amount of downforce being applied.
Integrated pneumatic downforce system
The functional features of the integrated system are the same as the standard pneumatic system, explained above, with the addition of control through the display.
Heavy-duty adjustable downforce springs
Heavy-duty adjustable downforce spring
Planter row-unit downforce is an important factor to ensure consistent and proper depth control. The heavy-duty adjustable downforce feature provides up to 181.4 kg (400 lb) of downforce. There are four settings available to allow the operator to choose the amount of downforce required for the condition: 0 kg (0 lb), 56.7 kg (125 lb), 113.4 kg (250 lb), and 181.4 kg (400 lb).
Easy Adjust row cleaners
Coulter combo row cleaner
Easy Adjust row cleaner
Easy Adjust row cleaner and coulter combo provides a pneumatic row tillage solution that is controlled from the seat of the tractor.
Every decision to make an adjustment during spring planting reduces the acres planted per day and can increase or decrease profitability. An adjustment that can be overlooked is row cleaners due to planter size, difficulty to make the adjustment, and varying conditions across fields and time.
4600 CommandCenter™ Display and 4640 Universal Display view for row cleaners compatible with SeedStar 4HP
G5 Universal Display for row cleaners compatible with SeedStar 5HP
With the Easy Adjust row cleaners on ExactEmerge™ planters, operators now have a pneumatic solution to make on-the-go adjustments that is controlled directly from the seat of the cab. They can be raised from the cab as needed with the push of a button for wet areas, waterways, or end rows. For growers using SeedStar 4 HP, the row cleaners are completely integrated into the John Deere Gen 4 4600 CommandCenter display or 4640 Universal Display. For growers using SeedStar 5HP, a G5 Universal Display is required.
The Easy Adjust row cleaners have the capability to save three presets for varying ground engagement based on field conditions. The system is controlled in three sections: at each wing as well as the center (frame or wheel) track rows. The pneumatic lines use air from the active pneumatic downforce compressor, requiring no additional compressor to be installed on the planter. The Easy Adjust row cleaners utilize down and up force air bags. The adjustable air pressure setting for each bag allows the operator to set the ride of the row cleaner depending on the field conditions and the desired results. Making these on-the-go adjustments from tractor cab increases productivity and performance during planting.
For Easy Adjust row cleaner Precision Upgrade options, see the ordering guide.
The row cleaner-only option utilizes parallel linkage to provide the floating action growers require in their fields. Parallel linkage allows for the unit to float up and down in the situation of hills or hard objects. The cleaner and coulter combo does not have parallel linkage, however, the row cleaners have floating rings installed to help provide the same benefits.
The row cleaners utilize the field-proven SharkTooth® design. Row cleaners play a major role in maximizing yield toward uniform emergence, reducing row-unit bounce, and maintaining proper depth. The Easy Adjust row cleaners provide growers with quick and stress-free solutions to customizing the planter in variable field conditions. They are available on most ExactEmerge and MaxEmerge 5e equipped planters.
SharkTooth is a trademark of Yetter Manufacturing Incorporated.
Achieve accuracy with curve compensation
Curve compensation with planters
Terraces or waterways are two of many field obstacles that make planting on a curve challenging. When planters utilize drive shafts, they are not able to control each individual row-unit; as a result, planting on a curve presents an issue of maintaining 100 percent population. Since the inside rows are moving slower than the outside rows, the inside rows will be overpopulated while the outside rows are underpopulated.
With ExactEmerge™ planters and equipped MaxEmerge™ 5e planters, the curve compensation feature allows each row to receive an individual signal based on the speed at which the row-unit is moving, maintaining the correct population across the width of the planter. Without curve compensation, there could be as much as a 24 percent drop in population accuracy, which is equivalent to 8,600 seeds per acre when planting at 36,000 seeds per acre. Curve compensation measures acceleration within the main planter controller and utilizes speed inputs to ensure each row has the desired population accuracy.
Row cleaner options to meet residue management needs
Crop yields have increased through the years along with the amount of residue left in the field after harvest. At the same time, tillage practices have changed, including different tillage operations which maintain large amounts of surface residue, and even no-till practices. Row cleaners are an essential tool in managing this increased amount of residue.
John Deere seeding group offers a variety of row cleaner options to meet the needs of a producer's operation. Compatibility varies by model, row spacing, and other planter equipment.
Screw-adjust, unit-mounted row cleaner
Screw-adjust, unit-mounted row cleaner
The screw-adjust, unit-mounted row cleaner is mounted directly to the face plate of the row-unit, placing the ground engaging components just in front of the row-unit opener blades and depth gauge wheels. This close proximity allows the gauge wheels to control the depth of the row cleaner as well as the row-unit. This compact design also allows greater compatibility with fertilizer openers and other planter attachments.
SharkTooth® wheels are standard equipment on the unit-mounted row cleaner. The swept-tooth design of the wheel provides a clear path for the row-unit openers while resisting residue buildup on the wheel. The screw adjustment knob is accessible through the top of the parallel arms, providing convenient access for adjustments. The row cleaner can be adjusted in 1.6-mm (1/16-in.) increments, providing plenty of flexibility to meet the needs of changing conditions.
Floating row cleaner with unit-mounted coulter
Floating row cleaner with unit-mounted coulter
The floating row cleaner allows a row cleaner to be used in conjunction with a unit-mounted coulter. This combination is often desired in heavy residue loads and reduced tillage planting conditions. The row cleaner provides a clear path for the row-unit, while the unit-mounted coulter helps penetrate tough soil conditions.
Accommodating the unit-mounted coulter means the residue wheels are farther forward from the row-unit face plate than in the case of the screw-adjust row cleaner. To maintain performance, this row cleaner has the capability to float above a defined minimum depth.
Standard depth-gauging bands on the wheels allow the row cleaner wheels to float independently of the row-unit openers, allowing both to perform in varying terrain. The unit may also be set in a fixed position by simply pinning through the bracket if desired. This row cleaner also features SharkTooth wheels as standard equipment.
The floating row cleaner and unit-mounted coulters are available on many planters as factory-installed equipment.
NOTE: Screw-adjust row cleaners are not compatible with MaxEmerge™ 5e row-units with long parallel arms.
NOTE: DB models have the option for either unit-mounted coulter, screw-adjust row cleaners, or pneumatic row cleaners (only compatible with MaxEmerge 5e or equipped ExactEmerge™ models). The DB60T is only available with a less row cleaner option.
SharkTooth is a trademark of Yetter Manufacturing, Inc.
John Deere Connected Support™ prevents downtime and efficiently resolves issues with revolutionary technology-based solutions
Connected Support technology
When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.
John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.
With your permission, John Deere Connected Support:
- Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
- Saves time by remotely viewing in-cab displays, reducing trips to the machine
- Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
- Connects experts with the information needed to respond to downtime faster and prevent it altogether
With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.
Specs & Compare
| Specs & Compare | ||||
|---|---|---|---|---|
| John Deere DB90 54Row20 Planter |
Key Specs
| Number of rows | 54 | |||
|---|---|---|---|---|
| Row spacing | 51 cm 20 in. |
|||
| Frame - Fold configuration | 5-section front-fold | |||
| Frame - Flexibility | Up: 15 degree (angle) Down: 15 degree (angle) |
|||
| Row unit seed hoppers | Capacity Vacuum meter: 2.2 L 0.062 bu |
|||
| Seed Meters | Base Vacuum |
Rows and Row Spacing
| Number of rows | 54 | |||
|---|---|---|---|---|
| Row spacing | 51 cm 20 in. |
Frame
| Fold configuration | 5-section front-fold | |||
|---|---|---|---|---|
| Frame tube size | ||||
| Fold-and-go from tractor cab | ||||
| Flexibility | Up: 15 degree (angle) Down: 15 degree (angle) |
Hitch
| Base | ||||
|---|---|---|---|---|
| Optional | ||||
| Rear hitch |
Lift System
| Type | Wheel modules with rephasing hydraulic cylinders | |||
|---|---|---|---|---|
| Number of cylinders |
Tires
| Base | 445/50R22.5 center frame tires: 517 kPa 5.2 bar (75 psi) 31-13.5x15 six-ply wing frame implement tires: 152 kPa 1.5 bar (22 psi) 31-13.5x16.5 eight-ply wing frame skid steer tires: 241 kPa 2.4 bar (35 psi) |
|||
|---|---|---|---|---|
| Optional | ||||
| Quantity |
Row Units
| Type | ExactEmerge™ or MaxEmerge™ 5e row units | |||
|---|---|---|---|---|
| Opener | Tru-Vee double disk | |||
| Depth gauging | ||||
| Adjustment | ||||
| Walking wheels | ||||
| Row unit seed hoppers | Capacity Vacuum meter: 2.2 L 0.062 bu |
|||
| Row unit down force | Active Pneumatic Downforce or Individual Row Hydraulic Downforce | |||
| Scrapers, opener blades | ||||
| Seed tube sensors | ||||
| Coulter disk |
Seed Meters
| Base | Vacuum | |||
|---|---|---|---|---|
| Optional | ||||
| Finger pickup | ||||
| Radial bean meter | ||||
| Central Commodity System | Seed capacity 4581 L 130 bu |
Drive System
| Base | Electric motors: 56 V | |||
|---|---|---|---|---|
| Optional | ||||
| Number of drive wheels | ||||
| Drive wheel disconnect | ||||
| Counter shaft | ||||
| Drill shaft | ||||
| Seed transmission | ||||
| Transmission combinations |
Markers
| Type | Automatic alternating or independent control | |||
|---|---|---|---|---|
| Control | ||||
| Marker disk | ||||
| Shear bolt protection | ||||
| Less marker option |
Closing System
| Rubber tire closing system | ||||
|---|---|---|---|---|
| Cast iron closing system |
Herbicide and Insecticide
| Insecticide only hopper | ||||
|---|---|---|---|---|
| Herbicide only hopper | ||||
| Insecticide and herbicide hopper |
Liquid Insecticide System
| System available | ||||
|---|---|---|---|---|
| Tank capacity |
Seed Monitor System
| Base | SeedStar™ electronic system | |||
|---|---|---|---|---|
| Optional |
Tillage Attachments
| Unit-mounted coulter | ||||
|---|---|---|---|---|
| Frame-mounted coulter | ||||
| Bubble blade | ||||
| .63-in. fluted blade (25 flutes) | ||||
| .7-in. fluted blade (13 flutes) | ||||
| 1-in. fluted blade (8 flutes) | ||||
| Row tillage support hanger | ||||
| Tine tooth | ||||
| Cons. furrower w/ leading cutout blade | ||||
| V-wing bed sweeps | ||||
| Row cleaner | ||||
| Row cleaner - unit-mounted coulter | ||||
| Row cleaner - unit-mounted DD fert. opener |
Fertilizer
| Onboard / towed / tractor tanks | ||||
|---|---|---|---|---|
| Tank capacity | 2271 L 600 gal. |
|||
| Fixed-rate application | ||||
| Variable-rate application | ||||
| Pump type | ||||
| Pump rate | ||||
| Fertilizer opener type | ||||
| Flow divider distribution system | ||||
| Pressure manifold distribution system | ||||
| Dry fertilizer | ||||
| ExactRate Fluid Transfer System |
Dimensions
| Transport width (with markers) | 4.9 m 16 ft |
|||
|---|---|---|---|---|
| Transport width (without markers) | ||||
| Transport length | 16.8 m 55 ft |
|||
| Transport height | 3.7 m 12 ft |
|||
| Transport weight | 25,421 kg 56,045 lb |
|||
| Transport underframe clearance | 66 cm 26 in. |
|||
| Field operation height | ||||
| Field operation width | ||||
| Field operation length |
Ag Management Solutions
| Map-based seeding | ||||
|---|---|---|---|---|
| Field documentation | ||||
| Parallel tracking | ||||
| Disengaging Rows Planting (RowCommand™) | ||||
| Machine Management | ||||
| Operations Management | ||||
| Turn Compensation |
Additional Information
| Recommended tractor horsepower | Requires a minimum 261 kW 350 hp Tractor equipped with Category 5 drawbar only |
|||
|---|---|---|---|---|
| Recommended tractor hydraulics | Hydraulic oil pump required to operate electric drive planter: 227 L/min 60 gpm Tractor standby pressure: 15,500 kPa 155 bar (2300 psi) Hydraulic system working pressure: 20,684 kPa 207 bar (3000 psi) Hydraulic system burst pressure: 82,737 kPa 827 bar (12,000 psi) |
|||
| Warranty length | ||||
| Date collected |
-
1705Planter -
1715Planter -
1725 Integral Stack-FoldPlanter -
1725CPlanter -
1745Compact Planter -
1765 FlexDrawn Planter -
1775NT 12Row30Drawn Planter -
1775NT 16Row30Drawn Planter -
1775NT 24Row30Drawn Planter -
1785 Drawn Planter -
1795 12Row Split 23 or 24Planter -
1795 16Row Split 31 or 32Planter -
1795 24Row20Planter -
DB44 24Row22Planter -
DB60 24Row30Planter -
DB60 24Row30/47Row15Planter -
DB60 24Row Split 48Planter
-
DB60 36Row20Planter -
DB66 36Row22Planter -
DB80 32Row30Planter -
DB80 48Row20Planter -
DB88 48Row22Planter -
DB90 36Row30Planter -
DB90 54Row20Planter -
DB120 48Row30 Planter -
DR12Planter -
DR12 Twin RowPlanter -
DR16Planter -
DR18Planter -
DR24Planter -
MP512Planter -
MP516Planter