S240Lawn Tractor with 48-in. Deck

The S240 Tractor has a large 44.3-cu in. (726-cc) displacement engine with premium features that provide superior performance and reliability:

• Large cleanout ports, integrated into the engine shroud, are located over the cylinder heads to allow for easy inspection and removal of any debris that may have collected there.
• Premium engine oil and air filtering systems and cooling design provide increased reliability and engine life.

The 21.5-hp (16-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

• V-twin cylinder design for greater torque, lower vibration, and improved sound quality
• Electronic ignition for fast starts
• Cast-iron cylinder liners for longer engine life
• Overhead valves for excellent power and fuel economy
• Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
  • Also more effective when operating the tractor on an incline
• In-line fuel filter for reliable operation

The engine speed lever and choke control lever are separate controls:

• The engine speed lever is easy to use - there is no need to worry about pushing too far and engaging the choke as on single throttle/choke lever systems.
• The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.

 Engine hood opens wide for easy access to service points:

• It is easy to inspect and clean the engine area.
• Important service points are exposed.
• Cleanout ports designed into the engine shroud make cleaning the engine cooling fins easy.
• The high-quality engine used in the S240 does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.

Fuel tank

• Capacity is 2.4 U.S. gal. (9.08 L).
• Fuel-filler opening is conveniently located under the seat. 
  • Filling the tank without spilling is easy.
  • The tethered fuel tank cap is more convenient.
  • The sealed fuel cap helps keep vapors inside the tank.

The 48-in. (122-cm) Accel Deep Mower Deck is a 10-gauge (0.1345-in., 3.42-cm) stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:

• 4.83-in. (12.3-cm) depth throughout the entire deck shell allows for optimum mowing, mulching, and bagging performance.
  • Optional MulchControl™ attachment provides superior mulching performance and versatility.
• Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance.
• Mower deck is suspended from the vehicle for a smooth and level cut.
  • Adjustable mower wheels positioned just above ground level help reduce scalping.
• 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height
• Compatible with efficient 6.5-bu (229-L) two-bag material collection system

Excellent cut quality

NOTE: Optional front center rollers shown in above mower deck photos.

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

• Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
  • Helps maintain excellent cut quality at faster mowing speeds
• Clean flow of material out of the discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
• Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.

Productivity - getting the job done fast

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:

• Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

• Gives a smooth, even discharge of clippings at all mowing speeds
• Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging

Cleanliness - for the mower and the operator

The flat-top shape of the deck stamping is optimal for keeping the deck and the operator clean:

• There are few places to catch and hold material on top and underneath the deck.
  • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
  • Underside of deck is self-cleaning to maintain optimum performance without build-up of material to interfere with the flow of air and clippings
  • Less need to clean and remove buildup of material from underside deck
• The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck.
  • Limited amount of material drifts onto the operator and mower deck
  • Even for material discharged out of the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
  • Mulching prevents the discharge of material completely, and the MulchControl attachment makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

• The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

A wash port is provided to make cleaning the underside of the mower deck easy.

• A hose connector is included with the mower deck.

Superior durability is designed in

The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:

• Ribs in the deck shell add strength where it is needed.

Mower wheels are heavy duty:

• Provides greater strength and durability for longer, trouble-free life.
• Setting wheels to the correct height for the cutting height is quick and easy.

Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.

The mower deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Optional Power Flow™ bagger

An optional 6.5-bu (229-L) rear bagger material collection system (MCS) is available. It provides efficient bagging performance and has easy-to-empty bags:

• The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
• The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:
  • 6.5-bu (229-L) capacity
  • Easy-to-attach Power Flow blower
  • Easy-to-attach chute

 

An advantage of having an Accel Deep mower deck is compatibility with the optional MulchControl attachment, which makes mulching more practical.

Advantages of mulching grass clippings include:

• Creates a beautiful looking lawn
• Smaller grass clippings fall into the lawn canopy rather than lie on top
• Reduces the need for fertilizer
• Grass clippings are not blown onto the operator, driveways, or flower beds
• No need to dispose of bags of clippings

After it is installed and configured, the MulchControl attachment also has a handy feature where simple flips of a lever can:

• Change between side-discharge and mulching modes
• Change between bagging and mulching modes

How MulchControl works

NOTE: Optional front center rollers are shown in 48-in. (122-cm) mower deck photos.

MulchControl is an innovative, simple design that is easy to use and maintain. The MulchControl attachment includes baffles that control the flow of clippings material under the deck:

• The baffles contain the clippings in a smaller space so the mower blades chop them multiple times. The baffles’ dimensions are designed to accommodate the mulching and discharge modes.
• When the baffle gate is closed, the material stays under the deck and gets chopped into mulch that falls into the turf.
• When the baffle gate is open, clippings material is passed out the side discharge opening.

The MulchControl handle is on top of the mower deck and is used to open and close the discharge baffle.

MulchControl is well-suited to the following mowing situations:

• For operators who usually mulch, but side discharge when the grass gets too long
• For operators who usually side-discharge, but would like to be able to close the chute to control clippings
• For operators who always mulch a main lawn, but often side discharge secondary lawns
• For operators who bag clippings, but want to go farther before emptying bags (mulching in parts of the property)

MulchControl puts the operator in control of the clippings.

MulchControl limitations

While in the side-discharge mode, MulchControl still mulches about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

• When cutting strong southern grasses, such as Zoysia and Bermuda
• When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
• When optimum bagging and lawn cleanup is desired

The 42-in. (107-cm) MulchControl attachment includes a rear baffle (A), held in place by two carriage bolts and 13-mm nuts, at the rear edge of the discharge opening. This baffle:

• Is required for the full mulching mode
• Can remain in place or removed for side-discharging material
• Must be removed for installation of the bagger chute

MulchControl compatibility

There is an appropriate MulchControl attachment available for each Accel Deep mower deck type.

Mulching blades are included with each MulchControl attachment. They can be used for mulching, side discharging, and bagging in most conditions.

An exclusive 3-year or 200-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 200 Series Tractors.

• The warranty is hassle free, with one company handling all of the paperwork.
• Premium features of 200 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy.

Side-by-side foot pedals control the speed and direction of travel:

• Automotive-type accelerator controls ensure easy operation.
• The operator can change direction without lifting foot off the platform.
• A large pedal surface gives superior operator comfort.

Appropriate transmissions are used in each tractor model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

• Tuff Torq TLT200 – S220
• Tuff Torq K46 – S240

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

• 44-in. (112-cm) Snow Blower
• 46-in. (117-cm) Front Blade
• Tire chains or TerraGrip traction belts
• Weather enclosure
• Weights

 

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.7-mm) steel:

• Full-length robotically welded frame design has high-strength steel rails for added strength and long life.
• One-piece steel fender deck is bolted to the frame.

The S240 comes with premium Turf Trac tires for superior traction and appearance: A more rounded profile reduces lawn scuffing and steering effort.

Cast-iron front axle does not bend

The front axle is constructed of solid cast iron that will not bend:

• Automotive-like steering system with sector-and-pinion steering gears and single drag link and tie rod provides a very strong, low-effort, and tight-turning system.
• Grease fittings allow regular lubrication to help maintain easy steering and minimize wear.
• Large, 0.75-in. (19-mm) diameter wheel spindles provide excellent durability.

Front bumper protects the tractor

The front bumper provides additional front-end protection and attractive, bold style.

CargO Mount™ system makes installation of rear bagger and other attachments easy

The CargO Mount system is a combination of front and rear mounting points that provide convenient and easy installation of the rear bagger and other attachments.

Large, comfortable footrests

The operator station is designed for operator comfort and easy operation:

• Controls are positioned where they are easy to reach and use to control the tractor.
• The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
• The seat is positioned to provide the most comfortable operator position.
• The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
• Debris-removing channels help keep the footrest area clean and dry.

Comfortable seat

Operator comfort is enhanced with a 15-in. (38-cm) high-back, two-piece seat with an open back:

• The open-back seat design keeps the operator cooler
• Especially helpful when operating the tractor for extended periods of time
• Easily adjusted forward or rearward while in the seat
• Seat travel of 5.5 in. (14 cm) and 10 different positions
• The green plastic seat adjustment lever is easy to locate and use.
• Slide pads on the bottom of the seat allow the seat to slide more easily for convenient adjustment.

The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank:

• Rubber isolators under the seat smooth out the ride for greater operator comfort.

Convenient storage

The beverage holder and storage compartment, located on the right fender, add value and operator convenience.

Fender flares cover the tires more completely and add style to the tractor. Handgrips give extra comfort for the operator, especially when operating on hillsides. Reflectors make the tractor more visible.

Instruments and controls

Three-spoke steering wheel for greater operator comfort and control:

• Deluxe, 14-in. (35.6-cm) diameter steering wheel gives greater comfort and control compared to smaller diameter steering wheels used on many lawn tractors.

The contoured dash has clean, attractive styling:

• Controls are color coded and labeled for easy identification by the operator.
• Controls are logically placed and easy to reach.
• Easy-to-read fuel gauge is conveniently located on dash.
• The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
• The ignition switch is on the dash for starting ease.
• Functional design of the controls provides good appearance and a comfortable feel.

The engine speed lever and choke control lever are separate controls:

• The engine speed lever is easy to use.
• The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.

The mower deck is engaged with an easy-to-use electric PTO switch:

• The electric switch requires only a short movement.
• With an electric PTO clutch, the mower drive belt stays under tension at all times for improved reliability compared to manual PTO engagement systems.

Easy-read fuel gauge shows fuel level on the dashboard

The easy-read fuel gauge shows how much fuel is in the tank and can be seen on the dashboard:

• Easy to check fuel level
• Convenient location
• Visible in cloudy or dusk conditions (is not backlit)
• Will not slosh from bumps
• The MowerPlus smartphone app can read and remember the fuel level (optional MowerPlus™ deluxe smart connector required)
• The hour meter is also visible on the fuel gauge display

Side-by-side transmission control pedals

Side-by-side foot pedals control the speed and direction of travel:

• Automotive-type accelerator controls ensure easy operation.
• Operator can change direction without lifting foot off the platform.
• Large pedal surface gives superior operator comfort.

Cruise control

Cruise control is standard equipment:

• To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
• The cruise control can be released by pushing on the brake pedal or the forward pedal.

Parking brake control

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Mower deck height adjustment and handgrip

A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:

• Increments of 1/4 in. (0.64 cm) allow fine-tuning the cut height.
• Cut height is adjustable from 1 to 4 in. (2.5 to 10.2 cm).
• The lift handle is shaped for easy use and is out of the way of entering or exiting operators.

Reverse implement option (RIO)

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

• Carefully check the area around the machine.
• Disengage the mower before backing up.

NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

1. Stop forward travel.
2. Look behind the machine to be sure there are no bystanders.
3. Push and hold in the RIO switch while depressing the reverse pedal slightly.

NOTE: If the mower or other attachment stops while repositioning the machine, return the attachment engagement switch to the off position. Start engine and engage mower. Begin again with step 2. 

4. Release the RIO switch and reposition the machine as the machine begins to move rearward.
5. Resume forward travel. The mower or other attachment should continue operating.
6. Repeat procedure to position the machine again.

The one-piece hood opens easily to permit checking and servicing the engine:

• Important service points are located within easy reach.
• A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
  • The high-quality engines used in the 200 Series Tractor do not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

The seat tilts up and out of the way to make adding fuel easy.

The 200 Series Tractor are covered by a 3-year/200-hour bumper-to-bumper warranty*:

• Premium features of the 200 Series Tractors allow for this longer warranty period, with more coverage than other tractors of comparable size.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Hood will not dent or rust and includes quality headlights

• Molded-in color material reduces sound and does not rust or dent.
• Same quality hood material as on larger John Deere tractors provides good resilience and UV resistance for an extended time.
• Openings on the side let in plenty of cooling air while keeping the sound level low.
• Two headlights provide good lighting for nighttime operation.

Keep a John Deere lawn tractor running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

Look for the MowerPlus app on the iOS® or Android™ system app stores.

The app supports residential lawn equipment such as 100 Series, 200 Series, X300, X500, X700, Z200 through Z600, and many similarly sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

NOTE: Some product image variation may exist.

 

MowerPlus connectors also available (sold separately)

The John Deere MowerPlus connectors wirelessly link a lawn tractor to the MowerPlus app on a mobile device.

	Deluxe smart connector	Hour meter connector
Compatible with lawn tractors	S120, S130, S160, S170, and S180 Model year 2021 and later S240 (SN 880,001- )	S100, S110, S140, S220
Communicates engine usage to track maintenance intervals	X	X
Communicates fuel level and battery health	X
Compatible with MowerPlus app for iOS® operating system	X	X
Compatible with MowerPlus app for Android™ operating system	X

iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

• The cart has a premium molded, high-density polyethylene box construction.
• Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
• Polyethylene body will not rust or dent; it stays looking new longer.
• 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
• Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
• Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
• Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
• Styling is compatible with other John Deere equipment.
• Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

Wheels

Wheels are mounted on a solid, one-piece axle for durability.
 
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

• Good flotation
• Minimal rolling resistance
• Shock absorption

Sloped tailgate

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

A large-diameter hitch pin provides plenty of strength:

• Fast, easy attachment to the tractor hitch
• Spring pin to ensure the pin stays in place

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m3)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m3)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m3)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m3)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m3)	8 cu ft (0.22 m3)	10 cu ft (0.28 m3)	10 cu ft (0.28 m3)	13 cu ft (0.37 m3)	17 cu ft (0.48 m3)	17 cu ft (0.48 m3)	18 cu ft (0.51 m3)	21 cu ft (0.59 m3)
Struck	5.6 cu ft (0.16 m3)	6.6 cu ft (0.19 m3)	8.3 cu ft (0.24 m3)	8.3 cu ft (0.24 m3)	10 cu ft (0.28 m3)	15 cu ft (0.42 m3)	14 cu ft (0.40 m3)	15 cu ft (0.42 m3)	15 cu ft (0.42 m3)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

 

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

The 8-cu-ft (0.23-m³) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

• Compatible with riding lawn tractors and garden tractors
• Durable poly construction
• All-terrain pneumatic tires
• Converts from tow cart to push cart without tools
• Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m3)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m3)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m3)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m3)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m3)	8 cu ft (0.22 m3)	10 cu ft (0.28 m3)	10 cu ft (0.28 m3)	13 cu ft (0.37 m3)	17 cu ft (0.48 m3)	17 cu ft (0.48 m3)	18 cu ft (0.51 m3)	21 cu ft (0.59 m3)
Struck	5.6 cu ft (0.16 m3)	6.6 cu ft (0.19 m3)	8.3 cu ft (0.24 m3)	8.3 cu ft (0.24 m3)	10 cu ft (0.28 m3)	15 cu ft (0.42 m3)	14 cu ft (0.40 m3)	15 cu ft (0.42 m3)	15 cu ft (0.42 m3)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

 

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

• Firewood
• Lawn debris
• Sand
• Dirt
• Mulch
• Garden tools
• Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release
• Steep dump angle for complete emptying

 

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

 

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m3)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m3)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m3)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m3)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m3)	8 cu ft (0.22 m3)	10 cu ft (0.28 m3)	10 cu ft (0.28 m3)	13 cu ft (0.37 m3)	17 cu ft (0.48 m3)	17 cu ft (0.48 m3)	18 cu ft (0.51 m3)	21 cu ft (0.59 m3)
Struck	5.6 cu ft (0.16 m3)	6.6 cu ft (0.19 m3)	8.3 cu ft (0.24 m3)	8.3 cu ft (0.24 m3)	10 cu ft (0.28 m3)	15 cu ft (0.42 m3)	14 cu ft (0.40 m3)	15 cu ft (0.42 m3)	15 cu ft (0.42 m3)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

 

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

The 10PX tow-behind cart is great for hauling lawn debris, sand, dirt, mulch, and plants:

• Large, 650-lb (295-kg) capacity
• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release

Hand lever releases 180-degree dump angle for complete emptying

• Empties all material
• Makes cleanup of the cart easier

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m3)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m3)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m3)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m3)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m3)	8 cu ft (0.22 m3)	10 cu ft (0.28 m3)	10 cu ft (0.28 m3)	13 cu ft (0.37 m3)	17 cu ft (0.48 m3)	17 cu ft (0.48 m3)	18 cu ft (0.51 m3)	21 cu ft (0.59 m3)
Struck	5.6 cu ft (0.16 m3)	6.6 cu ft (0.19 m3)	8.3 cu ft (0.24 m3)	8.3 cu ft (0.24 m3)	10 cu ft (0.28 m3)	15 cu ft (0.42 m3)	14 cu ft (0.40 m3)	15 cu ft (0.42 m3)	15 cu ft (0.42 m3)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

 

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10PX Poly Utility Cart
Order number: LP72978

Oilite is a trademark of Beemer Precision, Incorporated.

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Welded box construction provides maximum reliability:

• Requires less setup time than the bolted construction.
• Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.

Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

• Good flotation
• Minimal rolling resistance
• Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch

A large-diameter hitch pin provides plenty of strength:

• Fast, easy attachment to the tractor hitch
• Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

• Steep dump angle makes emptying easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m3)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m3)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m3)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m3)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m3)	8 cu ft (0.22 m3)	10 cu ft (0.28 m3)	13 cu ft (0.37 m3)	17 cu ft (0.48 m3)	17 cu ft (0.48 m3)	18 cu ft (0.51 m3)	21 cu ft (0.59 m3)
Struck	5.6 cu ft (0.16 m3)	6.6 cu ft (0.19 m3)	8.3 cu ft (0.24 m3)	10 cu ft (0.28 m3)	15 cu ft (0.42 m3)	14 cu ft (0.40 m3)	15 cu ft (0.42 m3)	15 cu ft (0.42 m3)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

 

Model	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

The 17-cu-ft (0.48-m³) capacity 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Key features include:

• Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
• Convenient foot pedal release for easy dumping
• Molded stake pockets for enlarging the bed size

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m3)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m3)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m3)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m3)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m3)	8 cu ft (0.22 m3)	10 cu ft (0.28 m3)	10 cu ft (0.28 m3)	13 cu ft (0.37 m3)	17 cu ft (0.48 m3)	17 cu ft (0.48 m3)	18 cu ft (0.51 m3)	21 cu ft (0.59 m3)
Struck	5.6 cu ft (0.16 m3)	6.6 cu ft (0.19 m3)	8.3 cu ft (0.24 m3)	8.3 cu ft (0.24 m3)	10 cu ft (0.28 m3)	15 cu ft (0.42 m3)	14 cu ft (0.40 m3)	15 cu ft (0.42 m3)	15 cu ft (0.42 m3)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

 

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

16YS Swivel Cart

Order number: LP68186

Oilite is a trademark of Beemer Precision Incorporated.

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

• Firewood
• Lawn debris
• Sand
• Dirt
• Mulch
• Garden tools
• Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

 

Key features of the 17P Utility Cart:

• Cart has premium molded polypropylene box construction.
• Polypropylene body will not rust or dent, staying new looking longer.
• 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
• Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
• Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
• Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
• Styling is compatible with other John Deere equipment.
• 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
• Wheels are mounted on a solid one-piece axle.
• Wheels turn on iron/Oilite® bushings with grease fitting for long life.
• Spring-loaded dump latch is easy to use.

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m3)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m3)	HDPE**	300 lb* (136 kg) (tow)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
10PX	Order Zone	10 cu ft (0.28 m3)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, 200 Series, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m3)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump*	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m3)	Polypropylene	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, 200 Series, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m3)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

	7P	8Y	10P	10PX	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m3)	8 cu ft (0.22 m3)	10 cu ft (0.28 m3)	10 cu ft (0.28 m3)	13 cu ft (0.37 m3)	17 cu ft (0.48 m3)	17 cu ft (0.48 m3)	18 cu ft (0.51 m3)	21 cu ft (0.59 m3)
Struck	5.6 cu ft (0.16 m3)	6.6 cu ft (0.19 m3)	8.3 cu ft (0.24 m3)	8.3 cu ft (0.24 m3)	10 cu ft (0.28 m3)	15 cu ft (0.42 m3)	14 cu ft (0.40 m3)	15 cu ft (0.42 m3)	15 cu ft (0.42 m3)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump*	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	180 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	91 lb (41.3 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	84 lb (38 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

 

Model	7P	8Y	10P	10PX	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X	X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, S100, S110, S120, S130, S140, S160, S170, S180	X	X	X	X	X	X	X	X
S220, S240	X	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X	X
G110	X	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X	X

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

The BUC10126 6.5-bu (229-L) Power Flow grass collection system includes the hopper, chute, and blower. Mower blades are not included, as the bagger works well with either the standard side-discharge blades or mulching blades and the MulchControl™ system. It expands versatility of an S240 Tractor equipped with a 48-in. (122-cm) Accel Deep™ Mower Deck.

NOTE: Front ballast for the tractor is recommended, especially when operating on hills or inclines.

The blower, chute, and fan are molded from high impact polymer:

• Power Flow is lightweight for easy handling and minimal effect on mowing smoothness.
• It will not rust or corrode.
• Fan and housing resist wear and abrasion caused by sand.
• Contoured design gives a clean appearance and smooth grass flow.
• Fan is driven with V-belt from a sheave added to the top right mower spindle.

The chute includes a convenient handle and a fill indicator that tells the operator when the bags are full.

Specifications

Capacity	6.5 bu (229 L)
Material:
Hopper top	High impact polypropylene
Chute	Polyethylene
Blower housing	Nylon
Fan	Ultra-high molecular weight (UHMW) polyethylene
Bags	Polyester
Filling	Directly into bags for emptying on ground or in trailer or into plastic liners
Fan diameter	13 in. (334 mm)
Fan width	2.75 in. (70 mm)
Number of fan blades	4

 

Tractor compatibility and requirements

The 6.5-bu (229-L) hopper, chute, and Power Flow blower is for use with:

• S240 Tractor with 48-in. (122-cm) Accel Deep Mower Deck.

Requirements and/or recommendations:

• Front ballast is recommended when bagging, especially on hills or inclines.
• Use of rear tow-behind attachments that could come in contact with the hopper assembly is not recommended when the hopper assembly is installed.
• Special mower blades are not required.

Overview

The bagger kit can be set up without tools in minutes, provides efficient bagging performance, and has easy-to-empty bags. This is also commonly known as a material collection system (MCS).

Benefits

Bagging

• Two durable bags provide a generous 6.5-bu (229-L) capacity.
• The lower chute provides smooth airflow to reduce the chance of plugging.
• A duct directs air leaving the hopper toward the ground for clean operation.
• Loose-knit bags and a large exit duct allow more air flow to provide complete bag filling in wet grass conditions.

Emptying

• Monitor bag filling progress through a window; see light coming through the loose-knit bag or watch for grass lying against it.
• The hopper lid stays open while you empty the bags.
• The bags slide out with a pull and the handles make emptying easy.
• The hopper cover automatically latches when you close it.

Additional details

• Front ballast is recommended when bagging, especially on hills or inclines. Follow instructions in your operator’s manual.
• Use of rear tow-behind attachments that could contact the hopper assembly is not recommended.
• Installation:
• Special mower blades are not required for bagging.
• The kit is easy to remove and stores compactly. No parts are left behind to interfere with other attachments

The Power Flow blower propels the collected grass and leaves into the hopper.

• Contoured design gives a clean appearance and smooth grass flow.
• The fan is driven by belt parts included in the kit.
• The Power Flow blower cannot be added to a bagger kit that was not originally equipped with it.
• The five-blade fan runs at about 3200 rpm when engine speed is full.
• The system is lightweight for easy handling.

The 6.5-bu (229-L) hopper, chute, and Power Flow blower are for use with:

• S240 Tractors with 48-in. (122-cm) Accel Deep (48A) mower deck

Dump from the seat capability for 100 Series Tractors with a 6.5-bu material collection system (MCS)

The MCS 6 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere 100 Series and S240 Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere Material Collection System, installation is a breeze with simple hand tools.

Features:

• Lightweight aluminum construction
• Designed for full material expulsion
• Easy access self-latching spring tripped handle
• Ships almost fully assembled (5 minute handle assembly)
• Installs in seconds (after initial assembly)

Benefits:

• Easy - Convenient Access to dump handle directly from seat 
• Clean - No material handling, no mess 
• Efficient - Unload and go without leaving the seat 

NOTE: Fits John Deere 100 Series and S240 Tractor 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

MCS 6 attachment
Order number: LP47167

Fits John Deere equipment tow behind attachments.

• Strong magnetic grip
• Rust resistant
• Easy to install, secure fit

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

The front blade is excellent for pushing light snow or other loose material.

The blade is constructed for good performance and long life:

• Blade surface is curved to roll rather than push material, which requires less power and increased blade capacity.
• Bolt-on, replaceable cutting edge takes most of the wear to greatly extend the useful life of the blade.

For operator convenience, the blade comes with standard equipment for controlling it from the tractor seat:

• Blade can be angled left, right, or used in the straight-ahead position.

Full working range

The 46-in. (117-cm) blade can be operated up to 6.5 in. (16.5 cm) above ground level.

Floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.

The lift-linkage design makes raising the blade easy.

Controlled from tractor seat

For operator convenience, the blade comes with angling and lift components as standard equipment so it can be controlled from the tractor seat.

Front blade lift and angling components are included as standard equipment:

• Blade can be angled left, right, or used in the straight-ahead position.
• For 100 Series Tractors, L100 Series Lawn Tractors, G110 Garden Tractors, and S240 Tractor, lift components are provided with the blade so it can be raised and lowered from the tractor seat.

Specifications

Overall width	46 in. (117 cm)
Overall height	14 in. (36 cm)
Clearing width	46 in. (117 cm)
Angling positions	Three
Lift height	6.5 in. (17 cm)
Net weight	73 lb (33.1 kg)

Tractor compatibility and requirements

The 46-in. (117-cm) Front Blade is compatible with:

• 102, 115, 125, 135, 145, 155C, and 190C Tractors
• L100, L108, L110, L111, L118, L120, and L130 Lawn Tractors, and G110 Garden Tractor
• LA100, LA110, LA120, LA130, LA140, and LA150 Tractors
• LA105, LA115, LA125, LA135 Limited Edition, LA135 Special Edition, LA145, LA155, LA165, and LA175 Tractors
• D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170 Tractors
• E100, E110, E120, E130, E140, E150, E160, E170, and E180 Tractors
• S100, S110, S120, S130, S140, S160, S170, and S180 Tractors
• S220 and S240 Tractors

For model years 2016 and newer, the 46-in. (117-cm) Front Blade (BG20943) has a change to the mounting frame to make it compatible with model year 2016 and newer 100 Series and 200 SeriesTractors:

• The model years 2016 and newer Front Blades are also backward compatible with model year 2015 and older 100 and 200 Series Tractors.
• The model year 2015 46-in. (117-cm) Front Blade (BG20020) is not compatible with model year 2016 and newer tractors.
  • A model year 2016 and newer tractor steering change from a dual drag link system to a single drag link and tie rod design causes interference with older front blades.

Attachment			Tractors
Model year	Description	Order code/attachment number	2015 and prior	2016 and newer
2015 and prior	46-in. (117-cm) Front Blade	BG20020	X
2016 and newer	46-in. (117-cm) Front Blade	BG20943	X	X

Requirements and/or recommendations:

• Rear weights and tire chains are required for additional traction.

LG265 home maintenance kit

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

 

The LG265 home maintenance kit includes the following:

 

Quantity	Description
1	Engine oil filter
2	Engine oil quart
1	Fuel filter
1	Air filter element
1	Air filter element foam
2	Spark plug

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

• Automatically determines if the battery is 6- or 12-V and adjusts accordingly
• Helps maintain battery in good condition and ensures it is fully charged
• Powers on to charge battery and powers off when fully charged
• 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
• 1.5-amp trickle charges small batteries in 2 to 12 hours
• Maintains large battery charges
• Hookup protection guards battery and charger from damage 

 

Includes a choice of battery connection methods:

• Standard color-coded clips to connect to any battery
• Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use

Transporting mulch, plants, or debris is easier with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. For use with any standard 5-gal. (19-L) or 6-gal. (23-L) bucket, the bucket holder is designed to carry up to 70 lb (32 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round: 

• Has corrosion preventers
• For lawn and garden equipment and other gasoline-powered vehicles
• Ensures quick starts in all two- and four-cycle engines
• Use in gasoline, gasoline-oil mixture, and ethanol blends
• Use to treat gas cans at each fill-up or use at every fill-up of vehicle
• Keeps fuel fresh for 12 months
• Contains a fuel injector and carburetor cleaner
• 1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit John Deere Parts.

Helpful tips:

• Add fuel stabilizer every time fuel is purchased.
• Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
• John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
• Use plastic fuel containers to store fuel; ask a local John Deere dealer.
• For best results, use a spill-proof gas can that automatically seals the gas can vent.
• Store fuel in a cool, dry, dark place in a sealed fuel can.
• Fill tank to the top every time the machine is put away.
  • Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine. 

For more information on fuel, visit John Deere Groundscare.

The John Deere MowerPlus deluxe smart connector wirelessly links some 100 and 200 Series Tractor models and Z500 Series ZTrak™ Mowers to the MowerPlus app on a mobile device:

• No tools are needed for installation.
• Detailed setup instructions are included.
• The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on or off, and the mobile device app is running within range.
• The wireless connector and app work together to offer helpful information.

Equipment features available for viewing on the MowerPlus app include:

• Tractor engine hours automatically synchronized to the app
• In-app maintenance reminders and log, based on engine hours
• Fuel level - even when away from the tractor, the app remembers information from the last synchronization, such as the fuel level.
  • When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
• Help to determine the best time to mow
• Expert pre-mow optimization tips
• Maintenance walk-through instructions

The operator is able to visit their device’s app store to see new app features as they are added.

Since the smart connector communicates instrument cluster information, future app releases will provide additional operating recommendations and notifications.

One end of the wiring harness plugs into the back of the fuel gauge. The other ends plug into the smart connector and the tractor's wiring harness. The Z500 Mowers come with a dedicated connectivity connector, so the new wire harness is not needed.

Compatibility and requirements

MowerPlus deluxe smart connector (BUC10929) is for use with the following lawn tractors and ZTrak Mowers:

• All S120, S130, S160, S170, and S180 Tractors
• Model year 2021 and newer S240 Tractors (serial number 880,001-)
• Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

The MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc.

Seat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.

NOTE: Optional front center rollers shown in above mower deck photo.

A complete mower deck can be ordered for replacement, if required.

Incomplete decks are also available through the John Deere Parts system. These decks include only the shell, discharge chute, and decals.

This AUC12522 48-­in. (122-­cm) Accel Deep replacement mower deck comes with three medium lift, side-discharge blades.

The BM26238 dry-condition kit, 48A is available for 48A Accel Deep Mower Decks used on S240 Tractors, model year 2016 and later X300 and X500 Select Series™ Tractors and Residential ZTrak™ Mowers. The 48A dry-condition kit will also work with any X700 Signature Series Tractor (model year 2013 and later) that is equipped with a 48A Mower Deck.

The dry-condition kit will reduce the amount of blowout around the mower deck when side discharging, mulching, or bagging in dry grass and leaf conditions. For optimum mowing performance in lush-grass conditions, the dry-condition kit baffles may be removed.

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

• Lawn tractors
• Lawn and garden tractors
• Riding mowers
• Front mowers
• Commercial walk-behind mowers
• Zero-turn-radius mowers

MulchControl advantages and benefits

The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

• A beautiful looking lawn
• Grass clippings not blown onto the operator, driveways, or flower beds
• Less fertilizer use
• Elimination of the effort needed to dispose of clippings

How MulchControl works

MulchControl is an innovative, simple design that is easy to use and maintain:

• The MulchControl attachment includes baffles to control the flow of material under the deck.
  • The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
  • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
  • When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.

• The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
  • The operator is required to get off of the machine in order to engage or disengage mulch mode.
• Changing from mulching to side discharging or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

• Usually mulch, but side discharge when grass gets too long
• Usually side-discharge, but would like to be able to close the chute to control clippings
• Always mulch a main lawn, but often side discharge secondary lawns
• Bag clippings, but want to go farther before emptying bags
  • With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.

MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

• When cutting strong southern grasses, such as Zoysia and Bermuda
• When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
• When optimum bagging and lawn clean-up is desired

Key features:

• Protects against sun damage, rain, dust, and tree sap
• Split back for fast fitting and easy access after installation
• Fabric is coated for maximum water resistance and repellency
• Reinforcements at key locations
• Reinforced air vent lets air circulate and helps prevent ballooning in wind
• Storage pocket reverses to attractive stuff case

For For use with:

• 100 Series and 200 Series Tractors with MCS installed
• X300 Series Tractors with 42-in. (107-cm) Mower Deck and MCS installed

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

Riding mower cover for tractor with MCS
Order number: LP70686

Features include:

• Wipe-clean reinforced bottom around mower deck
• Easy-on side handles makes snugging down cover a snap
• Dual reinforced air vents let air circulate and help prevent ballooning in wind
• Interior lining and integrated muffler heat shield
• Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
• Easy-on split back for fast fitting and easy access after installation
• Handy storage pocket reverses into an attractive storage case
• Two-year warranty

Cover provides heavy-duty protection for 100 Series, LT, LX, and 200 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (medium deluxe)

Order number: LP93617

Features include:

• Dual vents let air circulate and help prevent ballooning in wind
• Elastic shock cord in bottom hem for a quick, custom-like fit
• Coated fabric for maximum water protection
• One-year warranty

Cover provides all-season protection for 100 Series, 200 Series, and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Protective cover (standard)

Order number: LP93917

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

• Access to lumbar adjustment controls
• Large-capacity rear-zippered cargo pocket
• Two side mesh beverage pockets
• Elastic cord in bottom hem for a custom fit
• Medium size fits seats with backrests up to 15 in. (38.1 cm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe medium
Order number: LP92624

Seat cover protects new seats and renews old seats:

• Cushioned seat for extra comfort
• Four convenient pockets for keeping tools and gear within reach
• Elastic cord in bottom hem for a custom fit
• Medium size fits seats with backrests up to 15 in. (381 mm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324