6700APrecisionCut™ Fairway Mower
- 24.7 hp FT4 compliant Liquid-Cooled Diesel Engine
- 22” QA7 Cutting Units for a 100” total Width of Cut
- 3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive
- Passcode-protected TechControl display
Features
Expand All
Collapse All
QA7 electric reel motor
Smart Alternator
Diesel engine
Diesel engine
Smooth tires
Three-wheel stance
Treaded tire
TechControl display
Password-protected settings
Mow setting screen
Turn-speed setting screen
Input/output screen
Service timers screen
Language settings
Rear wheel motor
QA7 electric reel drive system meets customer needs for reduced hydraulic leaks, sound levels, and fuel consumption
QA7 electric reel motor
The electric reel design meets the largest customer needs:
- Eliminating 90% of the chances of an unsightly, damaging hydraulic leak by removing 150 leak points from the reel drive circuit
- Fuel Savings of up to 30% on the 7700A E-Cut™ Hybrid, and 21% on the 6700A E-Cut Hybrid, by mowing at reduced throttle minimizes operating costs
- Sound level reduction of up to 3dB(A) when mowing at reduced throttle opens up the operating window by being more friendly to neighbors
56-Volt, 240 amp Smart alternator and electric reel motors provide power for mowing, verticutting, and scalping
Smart Alternator
An innovative 56-volt, 240-amp alternator provides plenty of power for mowing, as well as more rigorous applications of scalping for overseeding and verticutting up to 1/4” (6.35 mm) deep.
- Belt driven from the engine, meaning no additional batteries required and less maintenance
- Integrates with LoadMatch™ by sensing load on the mowing system, and slowing traction speed to maintain cut quality when heavy loads are encountered
To handle the toughest loads that often come with Quick-Adjust 7 (QA7) applications, the reel motors have been updated compared to the QA7 design. The QA7 motors feature longer cooling fins for optimal cooling, and a larger internal bearing design.
QA7 Electric Reel Motor
18.4-kW (24.7-hp) Final Tier 4 (FT4) diesel engine offers plenty of power for mowing
Diesel engine
Diesel engine
Power starts with the engine, and the 6080A, 6500A, and 6700A PrecisionCut™ and 6080A and 6500A E-Cut™ Hybrid Fairway Mowers feature a 3-cylinder, 18.4-kW (24.7-hp ) diesel engine that has a strong reputation for power and performance. The engine is FT44 compliant, without the use of a diesel oxidation catalyst (DOC) or diesel particulate filter (DPF) to lower up-front acquisition costs.
The engine provides power for undulating conditions, while also being able to power fairway tender conditioners and rear roller power brushes while running any reel combination.
The air-intake system is also designed to pull clean air from the front of the machine behind the operator's seat, rather than dirty air from the rear of the machine. This improves engine performance and efficiency during those hot, dusty times of the year.
Three-wheel stance and smooth tires for excellent maneuverability and after-cut appearance
Smooth tires
Three-wheel stance
The 6080A, 6500A, and 6700A PrecisionCut™ and 6080A, 6500A, and 8000A E-Cut™ Hybrid Fairway Mowers help to make fairways that look like greens a reality.
An innovative, smooth tire design minimizes compaction and tire marking, especially in turns, giving a look similar to that from a riding greens mower. The GRIP all-wheel drive traction system works in combination with the smooth tire design to give a greens-quality appearance without sacrificing traction.
These machines also excel at weight distribution, ensuring each tire sees an equal amount of weight over a large tire surface area for a ground pressure that is friendly to the surface of the turf.
This three-wheel stance is common with riding greens mowers in the market today. This provides an after-cut appearance that is so good it looks like the fairways were mowed by a greens mower. The three-wheel stance also excels in maneuverability, allowing for tight turning at the end of passes for increased productivity.
Treaded tire
For those who prefer to use a treaded tire rather than a smooth tire, a fairway tread is also available through Parts.
TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics
TechControl display
Password-protected settings
More control with the TechControl display with a large easy-to-read screen
Passcode-protected TechControl display enables quickly setting or changing mowing speed, turning speed, or transport speed to limit variations in performance by different operators.
Mow setting screen
Quickly adjust the mow or transport speed to make sure mow speed is what is needed for the changing conditions. The setting can be adjusted precisely using a speedometer app on a smartphone or global positioning system (GPS) device.
Turn-speed setting screen
Use the TechControl to slow the machine during turns while mowing and protect against turf scuffing and aggressive turning operators.
The turn speed control engages when in mow and the cutting units are lifted for turns. Once the turn is made and the cutting units are lowered, the machine speed returns to the set mow speed.
The turn speed is a percentage of mow speed. When set to 100 percent, turn speed control is off or allows 100 percent of the mow speed in turns. Turn speed setting of 50 percent allows only 50 percent of the set mow speed to be reached during turns.
Here is an example:
Mow speed = 9.66 km/h (6 mph)
Turn speed set at 50 percent
Maximum turning speed will be 4.83 km/h (3 mph)
Input/output screen
Service timers screen
The A-model PrecisionCut™ Mowers, E-Cut™ Hybrid Mowers, and TerrainCut™ Mowers have the latest in advanced diagnostics through the TechControl display. Most all diagnostics are performed while sitting in the operator’s seat.
The TechControl has onboard visual diagnostics allowing quick and easy machine diagnostics, maximizing up time. The system allows technician to see inputs and outputs of the electrical system. Also, the technician can see stored controller codes on the machine to aide in troubleshooting incidents that may have occurred while on the course.
The TechControl will also display the notification for maintenance of the hydraulic and engine oils using service timers to notify when it has reached the time to perform the required service.
Language settings
Choose from a list of several languages to use for the TechControl.
Operator warning notifications are incorporated into the TechControl and will alert the operator if a problem arises during operation.
Description |
Hydraulic over temp |
Hydraulic oil filter restriction |
Engine oil pressure low |
Engine coolant temperature |
Reel motor |
Battery voltage |
GRIP all-wheel drive traction system moves flow from wheels that slip to those that grip
Rear wheel motor
The standard GRIP all-wheel drive traction system transfers hydraulic flow from wheels that slip to wheels that grip. For example, if the right front wheel starts to slip, hydraulic flow goes to the left front and rear tires to maintain traction power. This helps provide maximum traction in undulating conditions.
The GRIP all-wheel drive traction system is standard equipment with the 6080A, 6500A, and 6700A PrecisionCut™ and 6080A and 6500A E-Cut™ Hybrid Fairway Mowers and is also engaged at all times, whether in mow or in transport. A check valve in the rear motor puts the machine in two-wheel drive (2WD) in reverse to minimize any potential scuffing.
Specs & Compare
Add Model
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 6700A PrecisionCut™ Fairway Mower |
Key Specs
| Maximum rated horsepower | At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm |
|||
|---|---|---|---|---|
| Drive pump | Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge | |||
| Ground pressure | 69 kPa 10 psi |
|||
| Throttle | Hand throttle | |||
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | |||
| Mowing speed | 0 to 12.8 km/h 0 to 8.0 mph |
|||
| Cutting unit size | Quick Adjust QA5: 55.9 cm 22 in. |
|||
| Total width of cut | 254 cm 100 in. |
|||
| Reel diameter | 17.8 cm 7 in. |
|||
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) | 10- Blade: 1.04 mm/km/h 10- Blade: 0.066 in./mph 8-Blade: 1.30 mm/km/h 8-Blade: 0.083 in./mph |
Engine
| Type | Indirect Inject Diesel | |||
|---|---|---|---|---|
| Compliant emission regulation | United States and Canada Final Tier 4, EU Stage V | |||
| Horsepower | Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm |
|||
| Cylinders | Three | |||
| Displacement | 1.267 L 77.32 cu in. |
|||
| Air cleaner | 2-stage dry element | |||
| Fuel | Diesel Up to B20 compliant | |||
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
Vehicle
| Traction drive | ||||
|---|---|---|---|---|
| Drive pump | Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge | |||
| Cutting units drive | ||||
| Hydraulic system capacity | 37.8 L 10 U.S. gal. |
|||
| Fuel tank capacity | 60.6 L 16 U.S. gal. |
|||
| Steering | Hydraulic power with double acting steering cylinder | |||
| Front drive tires | 26.5x14-12 smooth | |||
| Steering tires | 24x13-12 smooth | |||
| Ground pressure | 69 kPa 10 psi |
|||
| Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system | |||
| ROPS | Standard; meets ISO 21299 Standard |
Operating weight
| Cutting units lowered | 1181 kg 2598 lb Canopy, FTCs and Power Brushes installed, full fuel |
|---|
Controls
| Throttle | Hand throttle | |||
|---|---|---|---|---|
| Forward/reverse | 2-pedal electronic control of eHydro system |
|||
| Mower lift | One-touch single handle | |||
| Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes | |||
| Seat | Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment | |||
| PTO | Electric Switch on Command Arm | |||
| Ignition | ||||
| Work lights | ||||
| Tilt steering | Left Foot operated for easy adjustment | |||
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | |||
| Storage | Cup holder; two-way radio; large operator storage located on left hand side of operator station |
Dimensions
| Height with ROPS | 217.3 cm 85.6 in. |
|||
|---|---|---|---|---|
| Length | 307.2 cm 121 in. |
|||
| Transport width | 219 cm 86.2 in. |
|||
| Mowing position width | 287 cm 113 in. |
|||
| Wheelbase | ||||
| Ground speed | Mowing 0 to 12.8 km/h 0 to 8.0 mph 4WD mow speed N/A Transport 0 to 16.1 km/h 0 to 10.0 mph Reverse 0 to 9.7 km/h 0 to 6.0 mph |
Cutting Units
| Number | Five | |||
|---|---|---|---|---|
| Size | Quick Adjust QA5: 55.9 cm 22 in. |
|||
| Total width of cut | 254 cm 100 in. |
|||
| Height of cut | Construction 6.3 to 50.8 mm 0.25 to 2 in. |
|||
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) | Rollers Front and rear: 76.2 mm 3 in. at 1600 reel speed (engine high idle) - 10- Blade: 1.04 mm/km/h 10- Blade: 0.066 in./mph 8-Blade: 1.30 mm/km/h 8-Blade: 0.083 in./mph |
|||
| Reel diameter | 17.8 cm 7 in. |
|||
| Bedknife adjustment | ||||
| Backlapping |
Sound levels
| Operator ear full engine | ||||
|---|---|---|---|---|
| Operator ear reduced engine rpm (2300 rpm) | ||||
| Measuring standard | ISO 11201 | |||
| Attachments installed | FTCs, reels engaged |
Fuel Economy
| Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality |
|---|
Warranty
| Type | Two-year limited |
|---|
Certification
| Type | ANSI B71.4-2012 |
|---|
Additional information
| Date collected |
|---|
-
6080A PrecisionCut™ Fairway Mower -
6080A E-Cut™ Hybrid Fairway Mower -
6500A PrecisionCut™ Fairway Mower -
6500A E-Cut™ Hybrid Fairway Mower -
6700A PrecisionCut™ Fairway Mower -
6700A E-Cut™ Hybrid Fairway Mower -
7500A PrecisionCut™ Fairway Mower -
7500A E-Cut™ Hybrid Fairway Mower -
7700A PrecisionCut™ Fairway Mower -
7700A E-Cut™ Hybrid Fairway Mower -
8000A E-Cut™ Hybrid Fairway Mower -
8700A PrecisionCut™ Fairway Mower -
8900A PrecisionCut™ Large-Area Reel Mower
Shop and Buy
Maintenance and Support
You May Also Be Interested In
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. Product features are based on published information at the time of publication. Product features are subject to change without notice.