Z965M EFIZTrak™ Zero-Turn Mower
- 33-hp (24.6 kW) EFI gasoline engine
- 60-in. and 72-in. 7-Iron™ PRO Side-Discharge Decks
- Brake-N-Go starting
- Cross-porting hydraulic transmission
Specs & Compare | ||
---|---|---|
Select up to 4 models to compare specifications | John Deere Z965M EFI ZTrak™ Zero-Turn Mower |
Add Model |
Engine Manufacturer/model | 61A6 EFI | |
---|---|---|
Engine power | Gross at 3,600 rpm 33 hp 24.6 kW |
|
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
|
Mower deck size | 60-in. (152-cm) 7Iron™ PRO side-discharge 72-in. (183-cm) 7Iron™ PRO side-discharge |
|
Blade tip speed | 7Iron PRO: Approximately 18,500 fpm | |
Transmission | Hydrostatic | |
Speed range | 0-12 mph 0-19.3 km/h |
|
Drive wheels | 24x12-12 | |
Caster wheels | 13x6.5-6 | |
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Manufacturer/Model | 61A6 EFI | |
---|---|---|
Power | Gross at 3,600 rpm 33 hp 24.6 kW |
|
Displacement | 60.6 cu in. 993 cc |
|
Cylinders | Two | |
Crankcase capacity | With filter and Oil Guard System, 5 U.S. qt 14.7 L |
|
Oil filter | Full flow, replaceable | |
Lubrication | Full pressure | |
Cooling | Forced air, with integrated clean out ports | |
Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
Fuel type | Gasoline | |
---|---|---|
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 7Iron PRO side-discharge: 1.4 U.S. gal./hr 5.3 L/hr FastBack PRO rear-discharge: 1.3 U.S. gal./hr 4.9 L/hr |
|
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
|
Fuel tank switch/shut-off valve | No |
Charge system | 20 amp | |
---|---|---|
Battery voltage | 12 V | |
Cold cranking amp | 300 amp | |
Hour meter | Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics | |
Operator presence starting system | Brake-N-Go (hand) |
Transmission | Hydrostatic | |
---|---|---|
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor with cross porting | |
Travel speed | Speed range 0-12 mph 0-19.3 km/h Forward 0-12 mph 0-19.3 km/h Reverse 0-4.5 mph 0-7.2 km/h |
|
Speed and direction control | Twin levers | |
Hydraulic capacity | 5.9 U.S. qt 5.6 L |
|
Filter | Internal, replaceable |
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
---|
Drive wheels | 24x12-12 | |
---|---|---|
Load rating | 4 PR |
Dynamic braking | Twin levers | |
---|---|---|
Park brake | Internal wet disk integrated in the transmission | |
Park brake actuation | Hand brake |
Type | Electro-magnetic, 225 lb-ft 305 Nm |
|
---|---|---|
Drive | V-belt |
Size | 60-in. (152-cm) 7Iron™ PRO side-discharge 72-in. (183-cm) 7Iron™ PRO side-discharge |
|
---|---|---|
Deck construction | 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel | |
Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
|
Cutting width | 60,72 in. 152, 183 cm |
Length | Varies by deck size | |
---|---|---|
Thickness | 7Iron PRO: 0.25 in. 6.4 mm |
|
Blade tip speed | 7Iron PRO: Approximately 18,500 fpm | |
Number | Three |
Caster wheel type | Flat free | |
---|---|---|
Caster wheels | 13x6.5-6 | |
Front anti-scalp rollers | Left, center, right | |
Rear anti-scalp rollers | 7Iron PRO: Left, center, right |
Length | 60-in. deck: 87 in. 221 cm 72-in. deck: 90 229 cm |
|
---|---|---|
Width | With chute down, 74, 86 in. 188, 218 cm |
|
Height | With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm |
|
Weight | 1415 to 1485 lb 642 to 674 kg |
Rollover protective structure (ROPS) | Yes | |
---|---|---|
Slope operating limit | 20 degrees (10 degrees with material collection system installed) |
Date collected | 01-Oct-2024 |
---|