An exclusive, two-year, single-source, bumper-to-bumper warranty is for all John Deere commercial mowing equipment. The warranty is best in class and places John Deere at the forefront of commercial mowing. It is hassle free, with one company handling all of the paperwork.
Rubber, wide-profile, flat-free front caster wheels provide a smooth cut.
John Deere provides application-specific Environmental Protection Agency (EPA) and California Air Resources Board (CARB) approved field-installed propane conversion kits for specific John Deere Commercial Walk-Behind Mowers, QuikTrak Mowers, and ZTrak Mowers. The conversion kits include all components required to convert the engines to operate on propane fuel. Single-tank or dual-tank brackets (depending on the vehicle) are provided for securely holding the propane tank(s) to the vehicle.
Propane tanks are not included.
Optional altitude kit is required when operating at altitudes above 2000 ft (610 m). The operator’s manual provided with the propane conversion kit provides further details. Parts must be ordered separately through John Deere Parts.
Advantages of John Deere propane conversion kits include:
Propane tank mounting bracket options:
Optional tank and configurations and sizes are available to provide operators the ability to tailor for run time:
NOTE: Reference the “Propane and Attachment Compatibility Chart” to determine tank configurations that are compatible.
|Average consumption (lb [kg]/hr)||3.9 (1.8)||4.2 (1.9)||4.2 (1.9)||5.8 (2.6)|
|Run time (hours) with 20-lb (9.1-kg) tank||5.1||4.8||4.8||3.4|
|Run time (hours) with 33.5-lb (15.2-kg) tank||Not available||8.0||8.0||5.8|
|Run time (hours) with 43.5-lb (19.7-kg) tank||Not available||10.4||10.4||7.5|
NOTE: Conversion to propane is not intended for units with engines having more than 250 hours of use.
Commercial Walk-Behind Mowers
|WG Series||WH Series||WHP Series|
|Engine displacement||603 cc||603 cc||603 cc||603 cc||603 cc||603 cc||726 cc||603 cc||603 cc||603 cc||726 cc|
|Propane kit model number||Not available||Not available||Not available||FS603cc||FS603cc||FS603cc||FS726cc||FS603cc||FS603cc||FS603cc||FS726cc|
|E Series||M Series||R Series|
|Model||652E||636M||648M||652M||648R||652R||652R EFI||661R||661R EFI|
|Engine model||FX691V||FS600V||FX691V||FX691V||FX691V||FX730V||ECV740 EFI||FX730V||ECV740 EFI|
|Engine displacement||726 cc||603 cc||726 cc||726 cc||726 cc||726 cc||747 cc||726 cc||747 cc|
|Propane kit model number||FX726cc||Not available||Not available||Not available||FX726cc||FX726cc||Not available||FX726cc||Not available|
Commercial ZTrak Mowers
|E Series||M Series||R Series|
|Model||Z915E||Z920M||Z925M FF||Z930M||Z930M EFI||Z950M||Z960M||Z930R||Z950R||Z970R|
|Engine displacement||747 cc||726 cc||747 cc||852 cc||747 cc||852 cc||999 cc||852 cc||852 cc||999 cc|
|Propane kit model number||Not available||FX726cc*||Not available||FX852cc*||Not available||FX852cc*||Not available||FX852cc*||FX852cc*||Not available|
Worthington tanks are manufactured by Worthington Industries, Inc.
The WH Series Mowers are equipped with an infinitely variable hydrostatic drive system with reverse, which does the following:
The WH Series Mowers also come equipped with a six-position hydrostatic-transmission adjustment plate. This feature allows an operator to adjust the sensitivity of the hydrostatic transmission to provide ultimate control and comfort.
John Deere commercial mower decks have always demonstrated quality, performance, and durability. The 7-gauge, 0.179-in. (4.6-mm), fabricated floating mower deck delivers an extremely high-quality cut in diverse conditions.
Wide and large drive wheels provide excellent traction with low turf compaction. They also provide maximum curb climbing. The square shoulder improves hillside performance.
The tire sizes for the WH Series models are as follows:
All of the controls on a WH Series Mower are within comfortable reach of the operator.
The location and simplified operation of the following controls on all models offer greater convenience, improved productivity, and increased safety:
WH36A Commercial Walk-Behind Mower is powered by a 14.5-hp (10.8-kW) air-cooled, vertical-shaft engine.
WH48A and WH52A Commercial Walk-Behind Mowers are powered by 18.5-hp (13.8-kW) air-cooled, vertical-shaft engines.
WH61A Commercial Walk-Behind Mower is powered by a 23-hp (17.2-kW) air-cooled, vertical-shaft engine.
A 3-cu ft (85-L) capacity grass catcher is available as an attachment for field conversion. Made of strong yet lightweight steel, the grass catcher provides an easy means for collecting thatch and leaves.
The grass-collecting system offers the following features:
|Select up to 4 models to compare specifications||
Commercial Walk-Behind Mower
|Displacement||36.8 cu in.
|Crankcase capacity||With filter, 1.8 U.S. qt
|Operating speed||3,600 rpm|
|Idle Speed||1,550 rpm|
|Governor||Flyweight all speed governor|
|Cooling system||Air cooled|
|Air cleaner||Dual element|
|Fuel tank capacity||5.8 U.S. gal.
|Fuel delivery system||Carburetor|
|Fuel tank switch/Shut off valve||Shut off valve|
|Filler neck opening|
|Fuel pickup||Top draw|
|Operator presence starting system||Standard|
|Transmission||Hydrostatic, twin loop control type, Hydro-Gear pumps, 10 cc|
|Outside to outside tire measurement||41.25 in.
|Caster wheels||9x3.5-4, flat free|
|Speed range||Forward, 7 mph
Reverse, 0-3 mph
|Type||Mechanical lever to engage brakes|
|Length with deck||75 in.
|Width||With with deflector, 60.8 in.
Fabricated steel, 7 gauge
Blade tip speed
Approximately 18,000 fpm
Width (chute up)
Floating style, 48 in.
|Warranty||24 month, single source commercial|
Save $600 on New John Deere WHP36A, WHP48A, WHP52A, and WHP61A Walk-Behind Mowers. Additional low rate financing options available on all New John Deere Commercial Walk-Behind Mowers.
†For complete details regarding this offer, please select the corresponding link below.
Mulching kits for walk-behind mowers.
The mulching attachment converts the mower deck from side discharge to a mulching deck by installing baffles that chamber off each spindle pocket. The attachment consist of mulching blades, mulch baffles, a discharge closure and hardware.