- ...
Features
Expand All
Collapse All
Global carrier
Optional glass roof with hatch shown
Loader-ready tractor
Mechanical joystick with gear shifting
Mid-mounted valve
Parking the loader
Round mast pin
Parking stands stored in torque tube
Loader parked
673 Loader
Removable stationary fenders
Loader suspension system with manual on/off switch
Loader suspension system with operator station on/off switch
Multicouplers - higher frequency parking, convenience, and performance
Relief valve
Brush guard
673 Loader shown on 6430P Tractor
673 Loader shown on 6130D Tractor
673 Loader
Reinforced bushings
Gusset plates on mast
Round mast pin
Boom foot bottom
Oil line cover
Enhanced visibility to top of bucket
Low-torque tube does not block the lights
Cast steel mounting frame improves visibility
Low-profile SL linkage and bellcrank
Global carrier
Global carrier
The global carrier conforms to ISO standard DIS23206. Although the design fully meets the standard, it is a unique, John Deere design. As most manufacturers now meet the ISO standard, this ISO standard has become the industry norm for carriers.
Features include:
-
The handle for latching is on the left-hand side of the loader to save time when unhooking attachments
-
The latching mechanism is on the carrier, eliminating the need to buy latches for every attachment used
-
The carrier is compatible with any competitor attachments that conform to the ISO standard
-
The carrier is composed of a rigid-bottom, square tube and a solid top bar; this creates a strong structure to reduce twisting if only one hook is mistakenly engaged while connecting an attachment
-
The top bar of the global carrier is cold drawn for improved wear resistance
Loader-ready package
Loader-ready packages available for 6030 and 6030 Premium Tractors
Optional glass roof with hatch shown
Loader-ready tractor
Mechanical joystick with gear shifting
Mid-mounted valve
To speed up installation time, order your tractor loader ready. The package is factory installed at the tractor factory in Mannheim, Germany. The loader-ready package includes:
-
Two- or three-function joystick (electronic or mechanical) (mechanical has gear shifting with PowrQuad Plus TM or Auto Quad transmissions)
-
Two- or three-function mid-mounted valve
-
Mounting frame
-
Toolbox bracket
-
Mid-mounted multicoupler tractor half
-
Hoses from mid-mounted valve to mid-mounted multicoupler tractor half
-
Hood guard
-
H4 beltline lights
-
Narrow header for increased visibility to the loader lift height
-
Glass roof with hatch (optional)
To complete the loader-ready package, the remaining loader parts are ordered from Welland in the hydraulics section (through codes 2050 or 2052). The parts include:
-
Mid-mounted multicoupler - loader half (two- or three-function)
-
Hoses from the loader half multicoupler to the loader oil lines (two- or three-function)
-
Third function / grapple multicoupler (if three-function)
-
Third function oil lines (if three-function)
Be sure to confirm what is available in the loader-ready package and order the appropriate loader components.
673 Loader high-mast parking system
Parking the loader
Round mast pin
Parking stands stored in torque tube
Loader parked
The 673 Loader features the high-mast parking system. Benefits include:
-
The mast-to-mounting frame connection point is easily viewed from the operator's seat, making it easier to insert the mast into the mounting frame when parking
-
The mast is shorter to prevent contact with fenders
-
The boom width allows enough space between the tractor hood to make adjustments when parking if not aligned properly
-
The mast-to-mounting frame pins are round to allow for easy removal
-
The mast-to-mounting frame pins are also used as the hardware to hold the parking stands inside the pockets
-
The parking stands are stored neatly inside the torque tube; this ensures that the parking stands do not obstruct visibility or restrict lift height by getting caught on objects when using the loader at full lift height
-
The top of the parking stands are reinforced to decrease yielding if the loader is parked improperly
-
The parking stands do not interfere with the largest tires at any tread width chosen
-
It is recommended to turn off TLS (6030 Premium) tractors when parking the loader
Performance-enhancing options
673 Loader
John Deere has added performance-enhancing items that increase productivity.
Cylinder latching systemRemovable stationary fenders
Loader suspension system with manual on/off switch
Loader suspension system with operator station on/off switch
Multicouplers - higher frequency parking, convenience, and performance
Relief valve
Brush guard
Loaders fit different tractor families
673 Loader shown on 6430P Tractor
673 Loader shown on 6130D Tractor
The 673 Loader is able to fit on different tractor families.
Current compatibility includes the 6D, 6030, 6030 Premium, 7030, and 7030 Premium Series Tractors. The 673 noncurrent compatibility includes the 4-cylinder 6000, 6010, 6020 Series tractors as well as 2WD 6615, 6715, 7220, 7320, 7420, 7210 and 7410 Tractors plus MFWD 6615, 6715, 7220, 7320, 7210, and 7410 Tractors.
NOTE: For specific model compatibility, please refer to the on-line compatibility chart information.
Boom, mast, and cylinders
The 563 and 673 Loader's booms have been designed to maximize strength and visibility.
Overall, the 673 is approximately 25 percent stronger than the 563. Differences between 563 and 673 booms, masts, and cylinders are the following:
- 673 has thicker mast steel
- 673 has thicker boom steel and a deeper section
- 673 has a 45-mm boom to mast pin versus 35 mm on the 563
- 673 has a larger diameter and thicker walled torque tube
- Cylinder size differences
673 Loader
Durability
The following features add up to years of reliability and high resale value for which John Deere loaders are known:
Reinforced bushings
Gusset plates on mast
- Reinforced bushings increase the life of high stress bushing areas
- Two gusset plates on the mast provide extra stiffness
Round mast pin
Boom foot bottom
- Round mast pin simplifies installation and removal; the handle of the mast is also utilized to install parking stands
- Reinforced boom foot bottom adds strength
Oil line cover
-
Oil line cover prevents damage to the lines from falling debris
Visibility
Enhanced visibility to top of bucket
Low-torque tube does not block the lights
Cast steel mounting frame improves visibility
Low-profile SL linkage and bellcrank
The loaders were designed to allow for maximum visibility.
- Low-torque tube allows for enhanced visibility to the attaching area and top of bucket
- Low-torque tube does not block the lights when carrying a load with the bucket
- Self-level linkage and bellcrank are low profile to improve visibility over the boom; the bellcrank is cast to minimize the size while adding strength to necessary areas
Specs & Compare
Add Model
Specs & Compare |
||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 0673XP 673 |
Key Specs
| Maximum lift height (A) | ||||
|---|---|---|---|---|
| Lift capacity at full height | ||||
| Boom breakout force | ||||
| Bucket rollback force capacity | ||||
| Clearance at full height - bucket dumped (C) | ||||
| Dump angle, degrees (E) | ||||
| Rollback angle, degrees (G) |
Tractor
| Model | 6430 Tractor | |||
|---|---|---|---|---|
| Front tire | 16.9R24 | |||
| Rear tire | 18.4R38 | |||
| Front axle configuration | ||||
| Wheelbase | 2400 mm 94.5 in. |
|||
| Pump capacity | 17.5 gpm | |||
| Rated pressure | 2901 psi |
Loader
| Base weight | ||||
|---|---|---|---|---|
| Leveling configuration | ||||
| Bucket used | Heavy Duty - 2150 mm Heavy Duty - 85 in. |
|||
| Bucket weight | 308 kg 679 lb |
|||
| Lift capacity at full height | Measured at pivot (U) 1630 kg 3594 lb Measured at 800 mm ahead of pivot (V) 1720 kg 3792 lb |
|||
| Lift capacity at 59 in. (1500 mm) | Measured at pivot (W) 2290 kg 5049 lb Measured at 800 mm ahead of pivot (X) 2180 kg 4806 lb |
|||
| Boom breakout force | Measured at pivot (Y) 3018 kgf 6654 lbf Measured at 800 mm ahead of pivot (Z) 2600 kgf 5733 lbf |
|||
| Bucket rollback force capacity | At maximum height (VV) 2203 kgf 4856 lbf At 59-in. (1500-mm) lift height (XX) 3018 kgf 6654 lbf At ground-level line (ZZ) 2937 kgf 6475 lbf |
|||
| Dimensions | Maximum lift height (A) 3680 mm 145 in. At full height - bucket level(B) 3485 mm 137 in. At full height - bucket dumped (C) 2815 mm 111 in. |
|||
| Overall length (I+F), ft (m) | 4.83 m 16 ft |
|||
| Overall height in carry position (J) | 1.99 m 7 ft |
|||
| Digging depth (H) | 90 mm 4 in. |
|||
| Reach | At maximum height (D) 1480 mm 58 in. At ground level - bucket level (F) 2430 mm 96 in. |
|||
| Bucket angle | Dump angle, degrees (E) -74 degree (angle) Rollback angle, degrees (G) 43 degree (angle) Dump angle, ground -90 degree (angle) |
|||
| Cycle times | Loader raise, seconds 6.3 seconds Loader lower, seconds 5.5 seconds Bucket dump, seconds 5.3 seconds Bucket rollback, seconds 5.6 seconds |
Additional information
| Date collected |
|---|