- Specialty Tractors (75-155 Engine HP)
- Utility Tractors (22.4 - 140 Engine HP)
- Utility Tractor Attachments & Implements
- Home & Workshop Products
Our IT4/EU Stage IIIB engines employ cooled exhaust gas recirculation (EGR) for reducing NOX, and a diesel particulate filter and diesel oxidation catalyst to reduce particulate matter.
Quad-Cool design isolates coolers from engine heat for increased efficiency and durability, and keeps them well protected behind the heavy-duty grille and fan.
Hydraulic-driven variable-speed fan runs only as needed, reducing noise and fuel consumption.
Separate, sealed hydraulic and hydrostatic systems with common fluid and filter codes eliminate cross contamination.
In-cylinder sensors enable return-to-dig, boom-height kickout, and bucket leveling. Setting them is push-button easy from the seat. These standard features, plus boom float, help speed cycles in repetitive applications such as truck loading.
Counter-rotating tracks and variable speed control increases productivity.
Choose joystick, multiple-lever hydraulic controls, or V-pattern transmission lever.
Large service doors open wide, and same-side daily checkpoints are conveniently grouped for ground-level access.
Operator station tilts a full 53 degrees in minutes, for wide-open component access.
Total Machine Control (TMC) allows you to customize operating characteristics and response, for superb, one-of-a-kind control. TMC can also be used to monitor machine readings such as mileage and hours.
Heavy-duty sealed and lubed undercarriage is standard, with extended-life and Maximum Life undercarriage systems optional.
Specs & Compare
|Select up to 4 models to compare specifications||
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PWX 4045|
|Emission Rating||Interim Tier 4|
|Displacement, ltr (Inches�)||4.5 (276)|
|Rated Speed, rpm||2200|
|Engine Output - Net, kW (hp)||83 (110)|
|Final drive type||In-line Drive Motor - Planetary w/Double Reduction|
|Track rollers per side - std||6|
|Track shoe pitch, mm (inches)||171.45 (6.75)|
|Track shoe width, mm (inches)||510 (20)|
|Ground Contact Area, cm� (Inches�)||21986 (3408)|
|Track shoes per side - std||38|
|Overall length, mm (ft/in)||6140 (20 ft 2 in)|
|Max. height, mm (ft/in)||2985 (9 ft 10 in)|
|Track length on ground, mm (inches)||2164 (85)|
|Ground clearance, mm (inches)||320 (12.6)|
|Track gauge - standard, mm (ft/in)||1600 (5 ft 2 in)|
|Shovel 1 width, mm (ft/in)||2290 (7 ft 6 in)|
|Shovel 1 dump height 45� max, mm (ft/in)||2640 (8 ft 8 in)|
|Bucket pin height, mm (ft/in)||3450 (11 ft 4 in)|
|Bucket reach - max, mm (ft/in)||1135 (3 ft 9 in)|
|Digging depth, mm (inches)||130 (5.1)|
|Steering clutches and brakes||Yes - Hydrostatic|
|Fuel tank capacity, ltr (gallons (US))||178 (47)|
|Implement hydraulic tank, ltr (gallons (US))||83 (22)|
|Shovel 1 capacity, m� (yd�)||1.3 (1.7)|
|Ground bearing pressure - standard, kPa (PSI)||54.5 (7.9)|
|Static tipping load shovel 1, kg (lbs)||8858 (19529)|
|Breakout force - max, kN (lbf)||107 (24054)|
|Alternator output, Amp||100|
|Pump type||Piston Pump - Load Sensed|
|Pump flow, lt/min (gallons (US) / min)||135 (36)|
|Relief pressure, kPa (PSI)||22063 (3200)|
|Operating weight std, kg (lbs)||12220 (26940)|
Features and specifications are based on published information at the time of publication. Features and specifications are subject to change without notice.