- Home & Workshop Products
The bale push moves the bale to the back of the bale wrapper. From this point, the operator can utilize the optional bale push-off arm to finish the process. The operator moves a lever to extend the arm, and the arm pushes the bale off onto the ground.
The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.
Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.
The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.
A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.
NOTE: LW Series In-Line Bale Wrappers come standard with a 9.7-kW (13-hp) Honda engine.
Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.
This remote control allows the operator to steer, start, and stop the machine without using the control panel on the machine.
This kit provides a double layer of wrap, increasing the amount of wrap applied to bales.
For early morning or late-night work, choose between two optional work lights: light-emitting diode (LED) and halogen.
Optional guide rollers help keep the bales on the bale ramp in uneven terrain.
The optional power jack hydraulically raises the bale ramp to a level position to eliminate air pockets between bales when starting a row. The bale ramp is lowered after three bales have been wrapped.
Honda is a trademark of Honda Motor Co., Ltd.
The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.
The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.
The control box and levers are the control center of the in-line bale wrappers.
Some of the uses include turning the unit on and off, and controlling the bale ramp and bale push.
Specs & Compare
|Select up to 4 models to compare specifications||
In-Line Bale Wrapper
|Overall machine height||2.7 m
|Overall machine width||2.7 m
|Overall machine shipping length||5 m
|Overall machine length||7.7 m
|Towing unit minimum weight||1,587.6 kg
|Round bale diameter||1.7 m
|Square bale size||0.9x0.9x.1.7 m
|Quantity||Four (two front, two rear)|
|Size (front)||11L-15 Implement|
|Size (rear)||11L-15 Implement|
|Engine size||9.7 kW
|Alternator size, amp||18 amp|
|Type||Electric over hydraulic 12 V|
|Steering||Hydraulic with optional remote control|
|Power drive||Optional: hydraulic single or dual wheel|
|Folding tail gate||Hydraulic|
|Lift mechanism||Optional hydraulic power jack|
|Compacting brakes||Hydraulic adjustable pressure valve|
|Hoop speed||Adjustable flow control valve|
|Cycle time||Adjustable with limit switches|
|Wrapping capacity||120 bales per hour|
|Film tensioners||Two aluminum rollers: 76.2 cm
with stretch: 55 percent
|Bale alignment||Adjustable bale guides|
|Bale guide rollers||Optional|
|Bale pusher||Self-contained scissor linkage|
|Unloading||Manual cross tube|
|Transport safety lights||Standard|
|Markings||SMV and reflectors|
|Safety tow chain||Standard|