TM10L SeriesTandem Disk Harrow
- Notched Front & Rear Blades
- Easy Gang Angle Adjustments
- Rear Hitch Included
- iMatch™Quick Attach Compatible
Features
Expand All
Collapse All
Front Gang Angle Adjustment
Rear Gang Angle Adjustment
Gang Angle Adjustments Made Easy
Front Gang Angle Adjustment
Rear Gang Angle Adjustment
Each disk gang on the TM10L can be adjusted individually from outside of the frame.
Individual gang adjustments improve operator ease by eliminating the need to reach into the middle of the frame for disk gang adjustments. Easier adjustments will make it more convenient to precisely set the disk angle necessary for each soil type and desired finish.
In addition to the individual gang adjustments, the TM10L front and rear gang angles are mismatched to enable straighter tracking in the field for a smoother finish.
Rear Hitch
The TM10L Rear Hitch feature was designed specifically with increased versatility in mind. The Rear Hitch enables a chain harrow to be attached to the TM10L series. Attaching a chain harrow offers a fewer pass solution that helps improve soil finish, reducing time spent in the field.
Disk Blades for a Variety of Conditions
Notched Front and Rear disk blades provide the TM10L with more aggressive soil penetration and versatility to create a finer soil finish. Individual gang angle adjustments enable notched front & rear disk blades to be easily adjusted for a finer soil finish that is typically seen with smooth disk blades.
iMatch™ Compatible
The TM10L comes iMatch™ compatible, making it quick and easy to switch implements.
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John Deere TM10L Series Tandem Disk Harrow |
Dimensions
| Working Width | 48 in. | |||
|---|---|---|---|---|
| Overall Width, in. (cm) | 50 (127) in. | |||
| Overall Height, in. (cm) | 34 (86.4) in. | |||
| Overall Length, in. (cm) | 52 (130.1) in. | |||
| Height to Hitch Pins, in. (cm) |
Disks
| Disk Spacing | 7.5 in. | |||
|---|---|---|---|---|
| Disk Thickness | 3 mm (0.118 In.) | |||
| Disk Diameter, in. (cm) | 16 (40.6) | |||
| Number of Disks | 12 | |||
| Front Gang Blade Type | Notched | |||
| Rear Gang Blade Type | Notched | |||
| Notched (front) / Notched (rear) | ||||
| Notched (front) / Smooth (rear) |
Weight
| Operating Weight | 437 lb | |||
|---|---|---|---|---|
| Shipping Weight | 452 lb | |||
| Weight per Disc (Approx.), lb (kg) | 36 (16.3) | |||
| Net | ||||
| Weight per disk blade |
Tractor requirements
| Engine HP Range (kW) | 15-25 (11.2-18.6) | |||
|---|---|---|---|---|
| Engine HP Requirements | ||||
| Recommended PTO hp range | ||||
| Recommended drawbar hp range |
Hitch
| Category | Limited Category I | |||
|---|---|---|---|---|
| iMatch / Quick hitch | Yes | |||
| Type | Clevis with Pin | |||
| Height to Hitch Pins, in. (cm) | 14 (35.6) | |||
| Bolt-on rear hitch | ||||
| Front hitch type | ||||
| Style |
Gang Axle
| Diameter, in. | 1 | |||
|---|---|---|---|---|
| Type | Square | |||
| Material |
Gangle Angles
| Front Gang Angles | 0,7,14,21 Degrees | |||
|---|---|---|---|---|
| Rear Gang Angles | 0,5,12,19 Degrees | |||
| Adjustment | Tool-less |
Tubing
| Gang / Frame Tubing | 2x3 rectangle with end caps |
|---|
Hanger Bearing
| Bearing type | Self Aligning Sealed Ball Bearing in Pre-Riveted Flange | |||
|---|---|---|---|---|
| Material Thickness |
Additional information
| Date collected |
|---|
Available blade sizes
| Blade option five | ||||
|---|---|---|---|---|
| Blade option four | ||||
| Blade option one | ||||
| Blade option six | ||||
| Blade option three | ||||
| Blade option two |
Construction
| Axle Diameter, in. | ||||
|---|---|---|---|---|
| Blade Spacing | ||||
| Blade Thickness | ||||
| Disc Diameter, in. (cm) | ||||
| Front Gang Angles | ||||
| Front Gang Blade Type | ||||
| Gang / Frame Tubing | ||||
| Number of Blades | ||||
| Rear Gang Angles | ||||
| Rear Gang Blade Type |
Disk blades
| Blade concavity | ||||
|---|---|---|---|---|
| Quantity | ||||
| Spacing | ||||
| Type |
Disk gangs
| Axle material | ||||
|---|---|---|---|---|
| Axle size | ||||
| Bearing standards | ||||
| Bearing type | ||||
| Bearing wear plates | ||||
| Front angle | ||||
| Furrow fillers | ||||
| Rear angle | ||||
| Scrapers |
Frame
| Duty | ||||
|---|---|---|---|---|
| Tube size | ||||
| Type |
Key Specs
| Approximate working width | ||||
|---|---|---|---|---|
| Disk blades | ||||
| Frame | ||||
| Notched (front) Notched (rear) | ||||
| Recommended drawbar hp range | ||||
| Transport - Width |
Lighting and safety
| Lights | ||||
|---|---|---|---|---|
| Markings | ||||
| Safety tow chain |
Set-up time
| Approximate Assembly Time | ||||
|---|---|---|---|---|
| Furrow Filler Kit | ||||
| Labor hours | ||||
| Rolling Basket | ||||
| Scraper Kit |
Tires
| Size | ||||
|---|---|---|---|---|
| Type | ||||
| Wheel hub type |
Transport
| Ground clearance with base blades | ||||
|---|---|---|---|---|
| Height | ||||
| Length | ||||
| Wheel hub bearings | ||||
| Width |
Warranty
| Time period |
|---|
Working
| Approximate working width | ||||
|---|---|---|---|---|
| Maximum penetration |
-
PB10 Series Plows -
PC10 Series Cultivators -
PM10 Series Middle Buster -
PS10 Series Subsoiler -
RT12 Series Rotary Tillers -
RT22 Series Rotary Tillers -
RT23 Series Rotary Tillers -
RT30 Series Rotary Tillers -
TM10L Series Tandem Disk Harrow -
TM11 Series Tandem Disk Harrows -
TM12 Series Tandem Disk Harrows -
TM13 Series Tandem Disk Harrows -
TM14D Series Tandem Disk Harrows -
TM51 Series Tandem Disk Harrows
Shop and Buy
Maintenance and Support
You May Also Be Interested In
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.