54-in. (137-cm) Quick-Hitch Snow Blower on X739 Tractor (shown with optional second drift blade)
The 54-in. (137-cm) Snow Blower has the capacity to handle big snow-removal jobs:
Front quick-hitch allows for tool-free change between snow blower, rotary broom, and front blade.
X739 with 54-in. (137-cm) Quick-Hitch Snow Blower (shown with optional second drift blade)
The low-speed auger picks up snow and moves it toward the center of the machine into the high-speed rotor, where it is blown out of the discharge chute.
Generally, two-stage snow blowers are more effective than single-stage snow throwers when operating in deep or drifted snow conditions.
Chute shown with optional remote spout cap control kit
The hydraulic cylinder and cable assembly provide a compact and efficient means of rotating the spout from the tractor seat:
The discharge spout has an adjustable deflector cap to control the height and distance that the snow is blown:
Hydraulic hoses for the chute-angling cylinder can be easily changed to come out the right or left side as needed so the 47-in. (119- cm) Quick-Hitch Snow Blower can fit X Series Tractors or 425, 445, 455 Tractors.
NOTE: The 54-in. (137-cm) Quick-Hitch Snow Blower is not compatible with the 425, 445, and 455 Tractors.
Snow blower upstop and drive shaft
Enclosed chain drive
Drive system features:
Durable auger drive
The auger is driven by the tractor's 2000-rpm front power take-off (PTO):
Impeller shear bolt
Auger shear bolt
Shear bolts are provided to protect the snow blower drive system, impeller, and auger:
Heavy-duty side skid shoes
The extra wide shoe is made of high-carbon, heat-treated steel:
Front quick-hitch mounting system
Snow blower connected to quick-hitch
The front implement slips into and locks onto the front quick-hitch with attached snap pins:
NOTES:
1) 2305, model year 2016 and older 2025R and 2032R, 2320, 2520, and 2720 Tractors must be equipped with front-attaching support kit for use with the Quik-Tatch front hitch.
2) If planning to use a Quik-Tatch front hitch with an OnRamp™ Mower (model year 2016 and older 2025R and 2032R, 2320, 2520, 2720 only), a front hitch/mid-mower combo bracket is needed to retain a tool-free change between the front hitch and the mid-mower deck.
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 54-in. Quick-Hitch Snow Blower For X700 Lawn Tractors, select Compact Tractors |
| Clearing width | Sweeping path Front quick-hitch: at 27 degrees: 53.5 in. 136 cm Front 3-point hitch: at 30 degress: 50 in. 127 cm |
|||
|---|---|---|---|---|
| Brush | Diameter 26 in. 66 cm Number of wafers 32 Width: 60 in. 152 cm |
| Broom straight | ||||
|---|---|---|---|---|
| Broom angled | ||||
| Sweeping path | Front quick-hitch: at 27 degress: 53.5 in. 136 cm Front 3-point hitch: at 30 degrees: 50 in. 127 cm |
| Diameter | 26 in. 66 cm Width: 60 in. 152 cm |
|||
|---|---|---|---|---|
| Material | ||||
| Number of wafers | 32 | |||
| Drive | Front power take-off (PTO) | |||
| Sweeping height | ||||
| Speed | ||||
| Top speed |
| On X700 | Hydraulic | |||
|---|---|---|---|---|
| On compact utility tractors | Hydraulic (dual selective control valve [SCV] joystick controls angling) |
| Right and left | Front quick-hitch: Any position up to 27 degrees left or right Front 3-point htich: Any position up to 27 degrees left or right |
|---|
| Type | Steel three-piece bolt-together |
|---|
| Housing | ||||
|---|---|---|---|---|
| Frame | ||||
| Lateral float |
| Input | ||||
|---|---|---|---|---|
| Center drive | ||||
| Brush drive | Front power take-off (PTO) | |||
| Brush shaft | ||||
| Broom gearbox reduction | Three-to-one, spiral bevel gear, synthetic extreme-pressure lubricant, shear pin protected, central location | |||
| Final drive | Three-to-one, spiral bevel gear, synthetic extreme-pressure lubricant, shear pin protected, central location |
| Size | ||||
|---|---|---|---|---|
| Adjustment |
| Storage stands |
|---|
| Type | Shear bolts (broom comes with four extra bolts) |
|---|
| Weight (broom only) | ||||
|---|---|---|---|---|
| Shipping weight |
| Date collected |
|---|
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.