Similar 54-in. (137-cm) Quick-Hitch Snow Blower on X739 Tractor (shown with optional second drift blade)
The 47-in. (119-cm) Snow Blower has the capacity to handle big snow-removal jobs:
X739 with 54-in. (137-cm) Quick-Hitch Snow Blower (shown with optional second drift blade)
The low-speed auger picks up snow and moves it toward the center of the machine into the high-speed rotor, where it is blown out of the discharge chute.
Generally, two-stage snow blowers are more effective than single-stage snow throwers when operating in deep or drifted snow conditions.
Chute shown with optional remote spout cap control kit
The hydraulic cylinder and cable assembly provide a compact and efficient means of rotating the spout from the tractor seat:
The discharge spout has an adjustable deflector cap to control the height and distance that the snow is blown:
Hydraulic hoses for the chute-angling cylinder can be easily changed to come out the right or left side as needed so the 47-in. (119- cm) Quick-Hitch Snow Blower can fit X Series Tractors or 425, 445, 455 Tractors.
NOTE: The 54-in. (137-cm) Quick-Hitch Snow Blower is not compatible with the 425, 445, and 455 Tractors.
Snow blower upstop and drive shaft
Enclosed chain drive
Drive system features:
Durable auger drive
The auger is driven by the tractor's 2000-rpm front power take-off (PTO):
Impeller shear bolt
Auger shear bolt
Shear bolts are provided to protect the snow blower drive system, impeller, and auger:
Heavy-duty side skid shoes
The extra wide shoe is made of high-carbon, heat-treated steel:
Front quick-hitch mounting system
Snow blower connected to quick-hitch
The front implement slips into and locks onto the front quick-hitch with attached snap pins:
NOTES:
1) 2305, model year 2016 and older 2025R and 2032R, 2320, 2520, and 2720 Tractors must be equipped with front-attaching support kit for use with the Quik-Tatch front hitch.
2) If planning to use a Quik-Tatch front hitch with an OnRamp™ Mower (model year 2016 and older 2025R and 2032R, 2320, 2520, 2720 only), a front hitch/mid-mower combo bracket is needed to retain a tool-free change between the front hitch and the mid-mower deck.
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 47-in. Quick-Hitch Snow Blower For X700 Lawn Tractors, select Compact Tractors |
| Width | Overall width: 48.2 in. 1225 mm Clearing width: 47 in. 1194 mm |
|||
|---|---|---|---|---|
| Height of opening | 20 in. 508 mm |
|||
| Auger | Diameter 16 in. 406 mm Drive Splined-coupler power take-off (PTO) shaft to enclosed roller chain Auger drive gearbox Cast-iron bevel gearcase with 1-in. (25-mm) output shafts Protection Shear bolt for each auger half, four shell-mounted extra shear bolts |
| Width | Overall width: 48.2 in. 1225 mm Clearing width: 47 in. 1194 mm |
|||
|---|---|---|---|---|
| Height of opening | 20 in. 508 mm |
|||
| Height to top of chute deflector | 42.5 in. 1080 mm |
|||
| Housing depth | 16.8 in. 427 mm |
|||
| Overall length | ||||
| Housing thickness | 0.075 in. 1.9 mm |
|||
| Side panel thickness | 0.194 in. 4.94 mm |
| Diameter | 16 in. 406 mm |
|||
|---|---|---|---|---|
| Speed | 172 rpm | |||
| Drive | Splined-coupler PTO shaft to enclosed roller chain | |||
| Auger drive gearbox | Cast-iron bevel gearcase with 1-in. (25-mm) output shafts | |||
| Protection | Shear bolt for each auger half, four shell-mounted extra shear bolts | |||
| Drift knife | One in base, optional second | |||
| Bearing |
| Speed | ||||
|---|---|---|---|---|
| Diameter |
| Blower fan drive | ||||
|---|---|---|---|---|
| Speed | 929 rpm | |||
| Blower fan material | Ultra-high molecular weight (UHMW) polyethylene | |||
| Blower fan size | 4.67 x 15 in. 119 x 381 mm |
|||
| Bearing | Sealed ball bearings |
| Type | Reversible and replaceable |
|---|
| Type | Hydraulic with down pressure | |||
|---|---|---|---|---|
| Lift height | 11 in. 27.9 cm |
| Diameter | 6 in. 15.2 cm |
|||
|---|---|---|---|---|
| Rotation | 200 degree (angle) | |||
| Rotation control | Hydraulic remote control |
| Chute control | ||||
|---|---|---|---|---|
| Chute rotation |
| Approximate weight | 240 lb 110 kg |
|---|
| Attaching time | No tools required: 5 minutes | |||
|---|---|---|---|---|
| Removal time |
| Date collected | 3-Nov-2021 |
|---|
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.