6130MUtility Tractor

Overview

Code	Description	Available for	Information
1424	PowrQuad - 16/16, 30 km/h (18.6 mph)	Open operator station (OOS)	Includes mechanical left-hand reverser
1426	PowrQuad - 24/24, 40 km/h (24.9 mph)	OOS 6110M, 6120M, 6130M, 6135M, 6145M	Includes mechanical left-hand reverser
1432	PowrQuad - 16/16, 30 km/h, with creeper (18.6 mph)	OOS	Includes mechanical left-hand reverser
1434	PowrQuad - 24/24, 40 km/h, with creeper (24.9 mph)	OOS 6110M, 6120M, 6130M, 6135M, 6145M	Includes mechanical left-hand reverser
1435	PowrQuad Plus - 20/20, 40 km/h (24.9 mph)	6155M, 6175M, 6195M	Includes electrical left-hand reverser
1436	PowrQuad Plus - 24/24, 40 km/h (24.9 mph)	6110M, 6120M, 6130M, 6135M, 6145M	Includes electrical left-hand reverser
1437	PowrQuad Plus - 16/16, 30 km/h (18.6 mph)	All models	Includes electrical left-hand reverser Not on 6155M, 6175M, 6195M
1439	PowrQuad Plus - 20/20, 40 km/h (24.9 mph), with creeper	6155M	Includes electrical left-hand reverser
1440	PowrQuad Plus - 24/24, 40 km/h (24.9 mph), with creeper	6110M, 6120M, 6130M, 6135M, 6145M	Includes electrical left-hand reverser
1441	PowrQuad Plus - 16/16, 30 km/h, with creeper (18.6 mph)	6110M, 6120M, 6130M, 6135M, 6145M, 6155M	Includes electrical left-hand reverser
1445	PowrQuad - 20/20, 40 km/h (24.9 mph)	OOS 6155M	Includes mechanical left-hand reverser
1446	PowrQuad -20/20, 40 km/h (24.9 mph), with creeper	OOS 6155M	Includes mechanical left-hand reverser
1453	AutoQuad Plus - 20/20, 40 km/h (24.9 mph)	6155M, 6175M, 6195M	Includes electrical left-hand reverser
1454	AutoQuad Plus - 24/24, 40 km/h (23.6 mph)	6110M, 6120M, 6130M, 6135M, 6145M	Includes electrical left-hand reverser
1457	AutoQuad Plus - 20/20, 40 km/h (24.9 mph), with creeper	6155M	Includes electrical left-hand reverser
1458	AutoQuad Plus - 24/24, 40 km/h (24.9 mph), with creeper	6110M, 6120M, 6130M, 6135M, 6145M	Includes electrical left-hand reverser

 

Modular concept

1. Differential housing
2. Range module
3. Option box
4. PowrQuad module
5. Mechanical front-wheel drive (MFWD) clutch module
6. Power take-off (PTO) module

Benefits

• Reliability
• High efficiency
• Low noise levels
• Convenient operation
• Long service intervals

Details

• The PowrQuad PLUS and AutoQuad PLUS family with four PowerShift gears combines technology with well-proven design features.
• Pressure lubrication that is filtered and cooled under all conditions ensures a long service life. Long life design for all clutch and brake components.
• The de-clutch button is included on cab configurations.
• The engine speed reduction can go down to 1880 rpm, depending on tractor model and tires.

Synchronized range module

Overview

Fully synchronized range modules with high contact helical gears provide large-tooth contact for greater torque transmission capability and quieter operation. A park lock is integrated as standard.

Creeper module option

For the 6110M-6135M the slowest gear is down to 0.25 km/h (0.15 mph) at 1000 engine rpm.
For the 6145M-6155M the slowest gear is down to 0.15 km/h (0.09 mph) at 1000 engine rpm.

PowrQuad PLUS or AutoQuad PLUS module

Speed control

Overview

Benefits

• Ergonomic and ideal position of the range lever for the operator
• Diagonal shifting possible with automatic centralizing of the range lever making shifting between ranges easier
• Park lock engagement integrated
• Button for automatic PowerShift on AutoQuad transmissions
• Declutch button integrated in the range lever on cab configurations
• Two push buttons on the top of the lever for changing PowerShift gear on cab configurations
• PowerShift gears switch beside the hitch control for simultaneous working on cab configurations

Transmission declutch button

Overview

The transmission declutch button feature is base equipment on AutoQuad PLUS and PowrQuad PLUS transmissions on 6M Cab Tractors. This gives the operator convenient range shifting and increases comfort in all operations.

Benefits

• Enabling shift ranges on the go without pressing the clutch pedal
• Useful in start stop situations

Left-hand reverser

Overview

The left-hand reverser with the neutral position is located in an ergonomic position to the left of the steering wheel. This allows quick, convenient, and smooth forward reverse shuttle shift at any speed. The forward, reverse, and neutral positions are also displayed on the dashboard.

Benefits

• Clutchless movements from forward to reverse
• Highly convenient on front loader work

FieldCruise™ engine controls

Overview

With FieldCruise, the operator limits the engine rpm to a minimum of 1200 rpm engine speed and a maximum of 2100 rpm engine speed.

Benefits

• The operator does not have to make small adjustments to the hand throttle when pushed to maximum the rpm stops at the FieldCruise setting

AutoQuad transmissions — button on the speed lever

Overview

The AutoQuad button is included in the lever to activate automatic shifting of the four PowerShift gears. The engine rpm at which the automatic power shifting shifts up or down can be infinitely set within a range to improve productivity in all load conditions.

Benefits

• Automatically shift between PowerShift gears within the range

Overview

John Deere 6M Series Tractors feature the reliable and proven PowerTech PVS 6.8L and PSS 4.5L and 6.8L engines. These air-to-air aspirated engines deliver a power bulge above rated power to provide excellent torque in demanding applications.

Key features:

• Series turbochargers (PSS only)
• Variable geometry turbocharger (VGT)
• Air-to-air after cooling
• High-pressure common rail (HPCR) fuel system
• Engine control unit (ECU)

PowerTech PSS/PVS engine identification

	After treatment S – Exhaust filter and selective catalytic reduction (SCR) X – Exhaust filter
	Turbocharger V – VGT S – Series turbochargers W – Wastegate turbocharger
	Technology P – PowerTech Plus E – PowerTech E

Benefits

• A constant power range of 2100 rpm down to 1500 rpm
• Power bulge of 10 percent
• Greater tractor productivity
• Responsive power reducing the need to downshift the transmission

Details

To match the engine power characteristics and improve the operation economy of the machine, the rated engine speed is 2100 rpm.

Series turbochargers

Overview

The PowerTech PSS 4.5L and 6.8L engines utilize two turbochargers – a VGT and a fixed geometry turbocharger. This provides the torque rise and engine response needed to meet varying load conditions.

Fresh air is first drawn into the low-pressure fixed geometry turbocharger and compressed to a higher pressure. The compressed, higher pressure air is then drawn into the high-pressure VGT where the air is further compressed. By splitting the work between two turbochargers, both can operate at peak efficiency and at slower rotating speeds.

Benefits

• Deliver high-power density
• More low-speed torque and responsiveness to meet varying load conditions

VGT

Overview

The VGT is electronically controlled and actuates the turbo vanes as required to maintain peak engine performance. PowerTech PVS 6.8L engines only have a VGT turbocharger.

The turbocharger’s vanes are in the exhaust flow. The opening or closing of the vanes changes the outlet volume and airflow speed against the turbocharger turbine. When exhaust flow is low, the vanes are partially closed. This partial closure increases the pressure against the turbine blades to make the turbocharger spin faster and generate more boost pressure.

The ability to keep the airflow at optimum levels provides more consistent engine boost pressure and the ability to respond to load quickly across the entire engine rpm range. This system is without the turbo lag that can be found on some engines.

Benefits

• Increased low rpm torque 
• Quicker response to load
• Increased peak torque
• Improved fluid economy
• Improved performance at high altitudes

Air-to-air after cooling

Overview

Air-to-air after cooling lowers the intake manifold air temperature and provides more efficient cooling while reducing cylinder firing pressure and temperatures for greater engine reliability. Since lower temperature air is denser, a higher volume of air flows into cylinders so the engine is capable of meeting the increasing horsepower demands. Lowering the intake manifold and cylinder temperatures also aids in lowering the combustion temperature, which lowers the NOx produced as a result.

Benefits

• Higher horsepower
• Less NOx production

HPCR fuel injection system

Overview

Every PowerTech PSS 4.5L and 6.8L engine utilizes a HPCR fuel system to efficiently supply fuel to injectors. The high-pressure fuel pump instantly responds to requirements for more or less fuel flow or pressure. This electronically controlled, high-pressure pump delivers pressure on demand according to the application requirements. Pressure on demand ensures an efficient injection system resulting in high-injection pressure independent of engine speed.

Benefits

• Instantly respond to load changes reducing the need to change gears
• Improved fluid economy

Engine control unit (ECU)

Overview

The ECU uses signal inputs from sensors and pre-programmed performance modeling to control critical engine functions such as fuel quantity, injection timing, air-to-fuel ratio, multiple fuel injections, amount of cooled exhaust gas recirculation (EGR), and a host of other control parameters.

Benefits

• Optimized fluid economy
• Maximum engine performance

Details

Each injector is controlled individually by the ECU. The ECU turns the injector on and off during each firing cycle to control the fuel delivery into each cylinder.

Load and speed sensing allows each cylinder’s fuel delivery rate to be adjusted independently at the individual injector. With each injection cycle, the ECU can make the following adjustments on the go:

• Number of injections
• Fuel pressure in the common rail
• Start of injection
• Duration of injection

This management system is connected to the transmission, allowing the engine and transmission to respond simultaneously.

Cold weather and high-altitude compensation are also precisely controlled for quality starts regardless of weather and maximum performance at high elevations. The ECU also features improved diagnostic capabilities. It is faster, has more working memory, and is responsible for monitoring and executing all aspects of the integrated emission control system.

Overview

The 6M Series Tractors feature the proven PFC hydraulic system with variable pressure up to 200 bar (2900 psi).

The following hydraulic equipment is available for 6M Series Tractors:

 

	Hydraulic pumps	Selective control valves (SCV), rear	Mid-SCVs
Function	Oil pump, L/min (gal./min)	Control rear implements	Control front implements/loader
Feature	PFC piston pumps or PC gear pumps Additional oil reservoir Three pumps available: 80 L/min (21.1 gal./min) 35 ccm 114 L/min (30.1 gal./min) 45 ccm	Up to three SCVs - mechanical (M) Standard (M) Premium (M) Premium couplers Power beyond Mechanical joystick	Up to three SCVs available: Two functional SCVs Three functional SCVs Mechanical joystick

 

Option availability
Code	Description	Information	6110M	6120M	6130M	6135M	6145M	6155M	6175M	6195M
3231	Hydraulic pump- 65 L/min (17.17 gal./min)	28 ccm pump, PC system	Only available for all open operator station (OOS) models
3232	Hydraulic pump- 80 L/min (21.1 gal./min)	35 ccm pump, PC system	X	X	X	X	X	-	-	-
3223	Hydraulic pump- 114 L/min (30.1 gal./min)	45 ccm pump, PFC system	X	X	X	X	X	X	X	X

Benefits

• Fast system response times
• Minimum energy losses, as pump returns to no output state when hydraulic flow is not needed
• Contributes to overall efficiency of the tractor

Advantages of this system:

• Reduced load on engine
• Improved fuel efficiency
• Enhanced oil cooling
• Reduced internal leakage
• Reduced hydraulic noise levels
• Less strain on hoses and seals

Pressure for the entire system is established by the function requiring the highest pressure. As demand lessens, so does hydraulic pump pressure and engine power requirements.

Other hydraulic system advantages include:

• Mechanical controlled valves
• Hydraulic steering for effortless operation
• Hydraulic wet-disc brakes that provide excellent brake performance
• 3-point hitch with increased lift capacity that can handle even the heaviest implements

High-capacity hydraulic pump

The hydraulic pump is located close to the hitch valve and selective control valves (SCVs), allowing:

• Fewer and shorter lines
• Quick system response times
• Minimized energy losses

For 6150M and 6170M, the 114-L/min (30.1-gpm) pump is base equipment.

 

Essential services have priority

The priority valve ensures, even at low idle engine speed, full power to the essential services like:

• Steering
• Brakes

Hydraulic and transmission systems are functionally separate; however, both systems utilize a common reservoir for easy serviceability.

 

Details

• 35 ccm pump (80 L/min) is base equipment for 6110M-6145M.
• 35 ccm pump (80 L/min) is not available for 6155M-6195M models.
• 45 ccm pump (114 L/min) is available for all models (including OOS) and base equipment for 6155M-6195M.
• The 45 ccm pump is required with cold start package II (code 8301).

Oil take-out capacity with/without additional tank

Overview

	6110M – 6145M	6155M – 6195M
Base hydraulic tank capacity, L (gal.)	25 (6.6)	35 (9.2)
Total take out capacity with additional tank, L (gal.)	37 (9.8)	47 (12.4)

Overview

The strong steel frame has been a John Deere industry exclusive since 1992, providing profound advantages over competitor solutions.

Below is a table demonstrating the available wheelbase measurements for all 6M models (mm/in.).

 

	Final Tier 4 (FT4) cab and OOS models
Models	6110M – 6130M	6145M – 6155M	6175M – 6195M
Wheelbase, mm	2580	2765	2800
Wheelbase, in.	101.6	108.9	110.3

Benefits

• This unique solution achieves higher payloads without increasing tractor weight, thus increasing productivity.
• The engine is separated from the full-frame design using rubber bushings. This method reduces the noise and vibration from the engine, ultimately improving tractor uptime and operator comfort.
• Full frame carries the load while the powertrain transmits engine power to the final drive. This reduces stress on mechanical components thus improving uptime and reducing costs of operation. 
• Higher power density is delivered by separating the load carrying components from the power transmitting components, allowing optimized designs and operator performance.
• Loader brackets mounted directly to the full frame, therefore loader forces are not transmitted to the engine or transmission.

Improved serviceability

• Frame mounting allows easier component accessibility without disturbing other systems.
• Complete modular component replacement, such as transmission and engine is achieved without splitting the tractor in half.

Overview:

The 6M cabs are designed with functionality and operator comfort in mind. While in the cab, the operator will experience various features that will make the operator’s task easier.


Benefits:

Four different cab packages, including a low-profile cab, are offered on the 6Ms to match the operator’s needs. Protection from elements such as wind, dust, sun, rain, or hot and cold temperatures improves an operator’s efficiency and productivity which leads to greater performance.


Details:

The four cab packages are broken down in the table below.

 

Cab packages with codes below		Basic	Economy	Standard	Low profile
Code	Description	2071	2072	2073	2074
Base	All cabs include: right-hand steps, front windshield wiper and washer, tilt/telescopic steering column, right-hand operational controls, floor mat, hand and foot throttle control and overhead reading light NOTE: Low-profile cab will not include a right-hand step or right-hand door.	X	X	X	X
8224	7-pin signal interface socket	X	X	X	X
8230	Inner rearview mirror	X	X	X	X
8240	Power outlet socket	X	X	X	X
8446	Right-hand and left-hand remote hitch controls	X	X	X
8206	Air conditioning	X	X	X
8762	No handbrake	X	X	X	X
8434	Swinging drawbar with hammerstrap	X	X	X	X
8746	154ah battery	X	X	X	X
2109	Mechanical suspension seat	X
2510	Mirrors standard left hand and right hand	X	X	X
2631	Panorama windshield	X	X	X
8280	Rear windshield wiper and washer		X	X
878S	Cup holder		X	X
8276	Sun visor		X
2127	Air suspension seat		X	X	X
2511	Mirrors manually adjustable and telescopic		X	X
8276	Front and rear roller blind			X
8254	Instructor seat			X
8266	Additional storage compartment			X
878R	Bottle holder			X
8217	iTEC™ Basic guidance application			X
8330	Horizontal exhaust				X

Additional factory-installed options include:

8261	Ash tray with cigarette lighter
878T	Glass roof hatch
878J	Vandal protection package*
878H	Multi power outlet strip
8782	Back-up alarm
2663	Radio

* Vandal protection package – includes lockable fuel cap, lockable transmission oil fill, and lockable hood