Specs & Compare
|Select up to 4 models to compare specifications||
8800A TerrainCut Rough, Trim & Surrounds Mower
|Type||Direct Inject Diesel|
|Compliant emission regulation||---|
|Maximum rated horsepower||At 2600 rpm: 31.1 kW
*Engine hp is provided by the engine manufacturer to be used for comparison purposes only. Actual operating hp will be less. Refer to the engine manufacturer’s web site for additional information.
|Air cleaner||2-stage dry element|
|Cooling system||Liquid centrifugal pump|
|Traction drive||Servo-controlled hydrostatic pump to 4 wheel motors with standard GRIP All Wheel Drive Traction System|
|Drive pump||Tandem gear pump|
|Cutting units drive||Direct-coupled hydraulic gear motor|
|Hydraulic system capacity||45.4 L
12 U.S. gal.
|Fuel tank capacity||68.1 L
18 U.S. gal.
|Steering||Hydraulic power with double acting steering cylinder|
|Front drive tires||26x12-12 Multi Trac|
|Steering tires||20x10-8 turf|
|Ground pressure||124 kPa
|Brakes||Disc and dynamic braking through closed loop hydrostatic system|
|ROPS||Standard; meets pending ISO 21299 standards|
|Cutting units lowered||---|
|Throttle||Hand control on operator control console|
|Mower lift||Single hand lever located on operator control arm|
|Parking brake||Foot pedal lock for foot operated park brake|
|PTO||Hand lever located on Command Arm|
|Tilt steering||Foot operated|
|Height with ROPS||2.4 m
|Transport width||2.18 m
|Mowing position width||2.23 m
|4WD mow speed||---|
|Total width of cut||53.3 cm
|Height of cut||No tool adjustment: 2.54-10.2 cm
|Height of cut - construction||Steel with front skid plate - 10 gauge
|Frequency of clip (FOC Reels) or Blade tip speed (decks)||4572 m/min
|Frequency of clip (FOC Reels) or Blade tip speed (decks) - rollers||Rear: 7.6 cm
Rear: 3 in.
Front: Two: diameter: 10.2 cm
Front: Two: diameter: 4 in.
Wide: 12.7 mm
Wide: 5 in.
|Operator ear full engine||89 dBA|
|Operator ear reduced engine rpm (2300 rpm)||---|
|Measuring standard||ISO 11201|
|Actual fuel usage will vary depending on course conditions, operation, turf and fuel quality||---|
|Type||CE and ANSI B71.4|
Equipment models, features, options, attachments and prices may vary in different locations. Please contact your local John Deere dealer for details. John Deere has the sole discretion to review and adjust the specifications, model features and prices of John Deere parts. Before operating the vehicle, you are required to carefully read and strictly follow the safety instructions provided in any product/operator/service manual for the vehicle.
Actual vehicle top speed may vary based on belt wear, tire selection, vehicle weight, fuel condition, terrain and other environmental factors. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Variation may exist between the actual operation data and defaulted data for the horsepower and torque. Please refer to the original engine manufacturer’s website for detailed information. Optional accessories and attachments are not included in the standard warranty claim for reimbursement. The product (including its components) and accessories may not be available in all regions.