7200 PrecisionCut
Trim Mower
Features & Specs
- 26.4-hp diesel engine
- GRIP All-Wheel Drive Traction System
- Front and rear roller options
- Convenient service check locations
See All Features
| Engine Type | Yanmar |
| Vehicle Traction drive | Hydrostatic pump |
| Operating weight, lb (kg) | 2600 (1179) |
| Mower Number | 3 QA7 reel cutting units |
See All Specs
Build Your Own
A comfortable operator equals better results.
Features like adjustable suspension seats, extra legroom, and well-located controls are necessities when it comes to doing a good job. They allow an operator to focus on the task at hand, and perform at a higher level. Take the steering system on the 7200, 7400 and 8800. With minimal effort, it allows striping a rough or trim area just like a green or fairway. It’s just one of dozens of conveniences first suggested to us by crew members themselves.
 Power for the Hills26.4 hp gives you the power to tackle even the toughest cutting conditions. Engine horsepower is provided by the engine manufacturer for comparison purposes only. Actual operating horsepower will be less. Easier MaintenanceWhite box control modules enable rapid, accurate identification of any service issues.  ISO-standard ROPSA rollover protective structure (ROPS) and retractable seat belt are standard equipment on the 7200 PrecisionCut Trim and Surrounds Mower. The ROPS meets pending ISO 21299 standards.
 Reach Trimming SystemPush button trimming. Just extend the right or left cutting unit up to 20* inches outside the front tire to trim out bunkers closer than ever before while keeping the traction unit away from the bunker wall. *With 30-in cutting units, 14" reach with 26-in cutting units Command ArmCombo armrest/control center moves with the seat and keeps all vital functions (like lights, lift/lower lever, PTO, throttle and optional cruise control) at the operator's fingertips.  Standard GRIP All-Wheel DriveThe GRIP All-Wheel Drive traction system is engaged all the time, ready to react instantly. So if a wheel begins to slip, the opposing wheel increases its grip.
 Standard QA7 Cutting UnitsA revolutionary Speed Link system makes it possible to adjust height-of-cut to both sides of the reel in no time. A linking bar connects both sides of the rear roller to a high-reduction ratio worm gear, allowing 1/1000th of an inch adjustments to be made to both sides of the roller simultaneously. QA7 cutting units available in 26-in. or 30-in. widths and 5 or 8-blade configuration.  Width on DemandOn side hills and in areas that require more turning, instantly reduce the cutting width for increased cutting unit overlap to limit the possibility of uncut grass strips between the cutting units.
|
.features
.specifications
.compare
.attachments
You may also be interested in
Product features are based on published information at the time of publication. Product features are subject to change without notice. Contact your local John Deere dealer for more information.
|
|
