Home / Parts / Agricultural Parts and Attachments / Grain Harvesting Parts and Attachments / Separator Body Parts & Attachments

Separator Body Parts & Attachments

Separator Body

Improve threshing performance in tough conditions.

Order From JD Parts

High-Wear Rear-Rifle Threshing Elements

High-Wear Rear-Rifle Threshing Elements
  • Recommended for combines harvesting large amounts in abrasive conditions like rice, beans, high-yielding irrigated crops or hard-to-thresh crops
  • Features proprietary Gopalite™ coating
  • Contains particles 25 percent harder than chrome
  • Greater wear resistance

Part Number: AH216678 – Standard corn/grain (Models: 9660, 9760, 9860, 9670, 9770, and 9870 STS Combines)

Part Number: AH216573 – Rice (Models: 9660, 9760, 9860, 9670, 9770, and 9870 STS Combines )

High-Wear Separator Tines

Separator Tines
  • Recommended for combines harvesting large amounts in abrasive conditions like rice, beans, high-yielding irrigated crops or hard-to-thresh crops
  • Extend the wear life of separator tines in tough and abrasive conditions
  • Feature Gopalite™ coating with particles 25 percent harder than chrome
  • Greater wear resistance and longer service life

Part Number: AH209123 (Models: 9650, 9750, 9660, 9760, 9860, 9670, 9770, and 9870 STS Combines)

Filler Plates

We offer two kinds of filler plates for two kinds of crop conditions:

  • Non-perforated filler plates for harvesting tough green-stemmed soybeans.
    • NOT recommended in corn above 25 percent moisture
    • Improved feeding and material handling capabilities of the cylinder
  • Perforated filler plates for harder to thresh conditions, like high-moisture corn.
    • Larger surface area of the perforated filler plate provides for more complete threshing of the kernels from the cob
    • Reduces buildup of dust and debris in the threshing cylinder

Concaves

Concaves

Large-wire concaves

  • Recommended for rice, sorghum, soybeans and corn
  • Standard on S-Series and STS Series rice combines, and available as an option on corn and small-grain combines
  • To extend the wear life, the option to boronize concaves with a wear-resistant material is available

Notes:
1. Extended-wear large-wire concaves are also available with the extended-wear separator package.
2. Not recommended for high-moisture corn (above 25 percent).

 

Round-bar concaves

  • Provide maximum grain quality and productivity when used for corn and soybeans
  • Recommended for use in specialty crops like edible beans and food corn
  • Available as a factory-installed option on rice combines, but large-wire concaves are standard on S-Series and STS rice combines and recommended when harvesting rice
  • Standard on corn combines - Front concave section is heat-treated
  • All three sections are available to be heat-treated as an option or in the extended-wear separator package.

Note: Round-bar concave inserts are available as a bundle attachment and are recommended for use with round-bar concaves in small grain. This field-installed bundle includes a set of two inserts and attaching hardware for use in the front concave section only. Extended wear is only available through the bundle number BH84226.

 

Small-wire Concaves

  • Standard equipment on small-grain combines
  • Recommended for use in wheat, barley, other cereal crops and specialty crops like grass seed
  • IMPORTANT: Not recommended for use in corn.
  • Available as an option with boronized treatment to extend wear life up to twice as long
  • Base Equipment On: S550 Small-Grain Combine, S660 Small-Grain Combine, S670 Small Grain Combine, S680 Small-Grain Combine, and S690 Small-Grain Combine and 9670 STS Small-Grain, 9770 STS Small-Grain, and 9870 STS Small-Grain Concaves.

Copyright © 2014 Deere & Company. All Rights Reserved