 |
| MANUFACTURER |
John Deere |
|
| MODEL |
759JH Track Harvesters |
|
| DATE OF SPECIFICATION |
Sep-08 |
|
| ENGINE |
|
|
| Manufacturer/Model |
John Deere / 6081H |
|
| Gross Power hp (kW) @ Rated rpm |
241 (180) @ 2000 |
|
| Net Power hp (kW) @ Rated rpm |
220 (164) @ 2000 |
|
| # Cylinders and Displacement cu in. (L) |
6 - 496 (8.1) |
|
| Gross Torque lb-ft @ rpm |
Not published |
|
| Net Torque lb-ft @ rpm |
907 (1230) @ 907 |
|
| ELECTRICAL Volts / Alternator amps |
24 / 80 |
|
| HYDRAULIC SYSTEM |
|
|
| Main Pump Type |
Variable axial-piston |
|
| Total Main Pump Flow gpm (L/min) |
95 (360) |
|
| Main Relief Pressure psi (kPa) |
Not published |
|
| Saw Pump flow, gpm (L/min) |
Not published |
|
| SWING SYSTEM |
|
|
| Rotation, degrees |
360 continuous |
|
| Swing Speed |
7.0 |
|
| Swing Brake Type |
Wet multiple disc |
|
| PROPEL SYSTEM |
|
|
| Max. Travel Speed mph (km/h) |
2.4 (3.9) |
|
| Drawbar Pull lb (kN) |
57,600 (26127) |
|
| Brake Type |
Not published |
|
| UNDERCARRIAGE |
|
|
| Track Chain Pitch in (mm) |
8.0" (200) |
|
| Track Gauge ft-in (mm) |
8' 0" (2440) |
|
| Width over Std Track ft-in (mm) |
10' 0" (3050) |
|
| Overall Track Length ft-in (mm) |
14' 6" (4420) |
|
| Track Length on ground ft-in (mm) |
11' 1" (3380) |
|
| No. of Lower Rollers/Side |
2 |
|
| No. Carrier Rollers or Slides/Sides |
8 |
|
| Ground Clearance w/Std. Pad in. (mm) |
Not published |
|
| Standard Track Pad Width in. (mm) |
8.4 (57.9) |
|
| Gound Pressure - Std. Pad psi (kPa) |
24" (610) |
|
| Optional Track Pad Width(s) in.(mm) |
28",24" (710,610) |
|
| HARVESTING HEAD ATTACHMENTS |
|
|
| Standard Make and Model |
Waratah H480 |
|
| Felling dia. in. (mm) |
25.6" |
|
| Delimbing dia. in. (mm) |
18.9" |
|
| Delimb feed rate,ft/sec (m/sec) |
Not published |
|
| Delimb feed force, lbs (kN) |
Not published |
|
| Attachment weight lb (kg) |
2,900 (1315) |
|
| Optional Make and Model |
Waratah HTH616 |
|
| Felling dia. in. (mm) |
20" |
|
| Delimbing dia. in. (mm) |
20.5" |
|
| Delimb feed rate,ft/sec (m/sec) |
Not published |
|
| Delimb feed force, lbs (kN) |
Not published |
|
| Attachment weight lb (kg) |
3,418 (1550) |
|
| UPPERSTRUCTURE TILT Yes/No |
Yes |
|
| Side-to-Side, degrees |
18º |
|
| Forward, degrees |
27º |
|
| Rearward, degrees |
10º |
|
| DIMENSIONS |
|
|
| Maximum Cutting Radius ft-in (mm) |
27' 10" (8480) |
|
| Minimum Cutting Radius ft-in (mm) |
7' 9" (93) |
|
| Cutting Swath, Horizontal, ft-in. (mm) |
20' 1" (6120) |
|
| Height to top of Cab ft-in. (mm) |
12' 11" (3940) |
|
| Upperstructure Width ft (mm) |
9' 8" (116) |
|
| Tail Swing Radius from Center ft (mm) |
6' 4" (1930) |
|
| Tail Overhang over side,Std shoe,in.(mm) |
16" (410) |
|
| Tail Overhang over end of track, in (mm) |
0 |
|
| CAPACITIES |
|
|
| Fuel Tank gal (L) |
154 (583) |
|
| Hydraulic Reservoir gal (L) |
36 (136.3) |
|
| OPERATING WEIGHT |
|
|
| With attachment lb (kg) |
61,900 (28078) |
|
| Less attachment lb (kg) |
59,000 (26762) |
|
|
|
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
|
|
|
|
|
|
