 |
| MANUFACTURER |
John Deere |
|
| MODEL |
759J Tracked Feller Buncher |
|
| DATE OF SPECIFICATION |
Aug-07 |
|
| ENGINE |
|
|
| Manufacturer/Model |
John Deere / 6081H |
|
| Gross Power hp (kW) @ Rated rpm |
241 (180) @ (Not published) |
|
| Net Power hp (kW) @ Rated rpm |
Not published |
|
| # Cylinders and displacement cu in. (L) |
6 - 496 (8.1) |
|
| Gross Torque lb-ft @ rpm |
Not published |
|
| Net Torque lb-ft @ rpm |
907 (1230) @ 907 |
|
| ELECTRICAL Volts / Alternator amps |
24 / 80 |
|
| HYDRAULIC SYSTEM |
|
|
| Main Pump Type |
Variable axial-piston |
|
| Total Main Pump Flow gpm (L/min) |
95 (360) |
|
| Main Relief Pressure psi (kPa) |
Not published |
|
| Saw Pump flow, gpm (L/min) |
35 (132) |
|
| Attach.pump(clamps & wrist) gpm (L/min) |
30 (114) |
|
| SWING SYSTEM |
|
|
| Rotation, degrees |
360° |
|
| Swing Speed |
7.0 |
|
| Swing Brake Type |
Wet multiple disc |
|
| PROPEL SYSTEM |
|
|
| Max. Travel Speed mph (km/h) |
2.4 (3.9) |
|
| Drawbar Pull lb (kN) |
57,400 (26037) |
|
| Brake Type |
Not published |
|
| UNDERCARRIAGE |
|
|
| Track chain Pitch in (mm) |
8.0" (200) |
|
| Track Gauge ft-in. (mm) |
7' 11.7" (2430) |
|
| Width over Std Track ft-in. (mm) |
10' 0" (3050) |
|
| Overall Track Length ft-in. (mm) |
14' 6" (4420) |
|
| Track Length on ground ft-in. (mm) |
11' 8" (3560) |
|
| No. of Lower Rollers/Side |
8 |
|
| No. Carrier Rollers or Slides/Side |
2 |
|
| Ground Clearance w/Std. Pad in. (mm) |
28" (711) |
|
| Standard Track pad width in. (mm) |
24" (610) |
|
| Ground Pressure -St. Pad psi (kPa) |
8.6 (59.3) |
|
| Optional Track Pad width(s) in. (mm) |
24",28" (610,710) |
|
| CUTTING HEAD ATTACHMENTS |
|
|
| Standard Saw/Shear Make and Model |
Waratah FS20 |
|
| Capacity, Tree dia. in. (mm) |
22" |
|
| Type: Disc Saw, Chain Saw, Shear |
Disc saw |
|
| Description |
Felling |
|
| Optional Saw/Shear Make and Model |
Gilbert 3022 |
|
| Capacity, Tree dia. in. (mm) |
21.5" |
|
| Type: Disc Saw, Chain Saw, Shear |
Disc saw |
|
| Description |
Felling |
|
| Optional Saw/Shear Make and Model |
Gilbert 3022 |
|
| Capacity, Tree dia. in. (mm) |
21.5" |
|
| Type: Disc Saw, Chain Saw, Shear |
Disc saw |
|
| Description |
Felling |
|
| UPPERSTRUCTURE TILT Yes/No |
Yes |
|
| Side-to-Side, degrees |
27º |
|
| Forward, degrees |
10º |
|
| Rearward, degrees |
18º |
|
| DIMENSIONS and LIFTING |
|
|
| Maximum Cutting Radius ft-in (mm) |
Not published |
|
| Minimum Cutting Radius ft-in. (mm) |
11' 7" (3530) |
|
| Cutting Swath, horizontal,ft-in(mm) |
15' 8" (4780) |
|
| Height to top of Cab ft-in. (mm) |
12' 11" (3940) |
|
| Upperstructure Width ft (mm) |
9' 8" (2950) |
|
| Tail Swing Radius from Center ft (mm) |
6' 4" (1930) |
|
| Tail Overhang over side,Std shoe, in.(mm |
16" (410) |
|
| Tail Overhang over end of track, in (mm) |
0.0 |
|
| Lift Capacity at Max Reach lb (kg) |
10,400 (4717) |
|
| CAPACITIES |
|
|
| Fuel Tank gal (L) |
154 (583) |
|
| Hydraulic Reservoir gal (L) |
36 (136.3) |
|
| OPERATING WEIGHT |
|
|
| With attachment lb (kg) |
65,860 (29874) |
|
| Less attachment lb (kg) |
60,060 (27243) |
|
|
|
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
|
|
|
|
|
|
