 |
| MANUFACTURER |
John Deere |
|
| MODEL |
315 Compact Track Loader |
|
| DATE OF SPECIFICATION |
Apr-09 |
|
| ENGINE |
|
|
| Manufacturer |
John Deere |
|
| Model |
4024T |
|
| Gross Horsepower (kW) |
49 (37) |
|
| Net Horsepower (kW) |
45 (34) |
|
| Rated RPM |
2400 |
|
| Gross peak Torque, lb-ft (Nm) |
139 (188) |
|
| Net peak Torque, lb-ft (Nm) |
Not published |
|
| # Cylinders |
4 |
|
| Displacement, cu in (L) |
149 (2.4) |
|
| Engine aspiration |
Turbocharged |
|
| Cylinder Liner type |
Parent bore block |
|
| Fuel Capacity, gal (L) |
18 (66) |
|
| HYDRAULIC SYSTEM |
|
|
| Standard Pump Flow, gpm (L/min.) |
16 (61) |
|
| Optional High Flow, gpm (L/min.) |
Not published |
|
| System Pressure, psi (kPa) |
3450 (23770) |
|
| Auxiliary Hydraulic Circuit, Std;Opt |
Std |
|
| Hydraulic power, calculated, hp (kW) |
32.2 (24.0) |
|
| Opt. H.-Flow Hyd. power, cal.,hp (k/W) |
Not published |
|
| PERFORMANCE |
|
|
| SAE Rated Oper. Cap.(ROC)35% tip lb(kg) |
1,500 (680) |
|
| ROC at 50% of tipping load lb (kg) |
2,206 (1001) |
|
| Tipping Load, standard, lb (kg) |
4,412 (2001) |
|
| Boom, lb (kN) |
2,700 (12.0) |
|
| Bucket, lb (kN) |
3,300 (14.6) |
|
| Heaped Bucket Capacity, cu ft (cu m) |
Not published |
|
| Reference Bucket Width, in (mm) |
66" (1680) |
|
| Lift Arm Geometry |
Radial |
|
| Self leveling bucket, Std; Opt |
Opt |
|
| DRIVE TRAIN |
|
|
| Maximum First Gear Speed mph (kph) |
6.0 (9.7) |
|
| Maximum Second Gear Speed mph (kph) |
Not applicable |
|
| Standard Rubber Track Width in (mm) |
12.6" (320) |
|
| Optional Rubber Track Width in (mm) |
Not applicable |
|
| Ground Pressure, Standard Track psi |
4.8 (33.1) |
|
| Ground Pressure, Optional Track psi |
Not applicable |
|
| Tractive Effort, lbs (N) |
8,000 (35,584) |
|
| Track Gauge, center to center in (mm) |
48.4" (1230) |
|
| DIMENSIONS |
|
|
| Length with Bucket, in (mm) |
124" (3150) |
|
| Length without Bucket, in (mm) |
96" (2440) |
|
| Width without bucket, in (mm) |
61" (1550) |
|
| Height to ROPS, in (mm) |
77" (1960) |
|
| Height to Hinge Pin, in (mm) |
110" (110) |
|
| Dump Height, in (mm) |
91" (2310) |
|
| Dump Reach, in (mm) |
17.4" (440) |
|
| Dump Angle, degrees |
40º |
|
| Bucket Rollback @ ground, degrees |
30º |
|
| Bucket Rollback @ full height, degrees |
Not published |
|
| Wheelbase, in (mm) |
Not published |
|
| Ground Clearance, in (mm) |
7.8" (198) |
|
| Angle of Departure, degrees |
25.25º |
|
| OPERATING WEIGHT, STANDARD LB (KG) |
6,800 (3084) |
|
|
|
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
|
|
|
|
|
|
