 |
| MANUFACTURER |
John Deere |
|
| MODEL |
75D EXCAVATOR |
|
| DATE OF SPECIFICATION |
Aug-08 |
|
| ENGINE |
|
|
| Manufacturer/Model |
Isuzu / 4LE2X |
|
| Net Power hp (kW) @ Rated rpm |
54 (40) @ 2000 |
|
| # Cylinders and Desplacement cu in. (L) |
4 - 133 (2.2) |
|
| HYDRAULIC SYSTEM |
|
|
| System Design |
Open |
|
| Main Pump Type |
Variable axial-piston |
|
| Total Main Pump Flow gpm (L/m) |
58.1 (220) |
|
| Normal Relief Pressure psi (kPa) |
3771 (25980) |
|
| Boost Relief Pressure psi (kPa) |
Not published |
|
| Max. Propel Pressure psi (kPa) |
4554 (31380) |
|
| UNDERCARRIAGE |
|
|
| Gauge ft (m) |
6' 2" (1880) |
|
| Overall Track Length ft (mm) |
9' 7" (2920) |
|
| Track Length on ground ft (mm) |
7' 6" (2290) |
|
| Width over Std Track ft (mm) |
8' 1" (2460) |
|
| No. of Lower Rollers / Side |
5 |
|
| No. Carrier Rollers / Side |
1 |
|
| Ground Clearance in. (mm) |
14" (356) |
|
| Standard Track Pad in. (mm) |
24" (610) |
|
| Grd. Press - Std. Pad psi (kPa) |
3.7 (25.5) |
|
| Optional Track Pad in. (mm) |
18",18" (460,460) |
|
| Max. Travel Speed mph (km/h) |
3.1 (5.0) |
|
| Off-level capacity % - (deg) |
70% (35º) |
|
| Drawbar Pull lb (kg) |
14,661 (6650) |
|
| ARM LENGTH |
|
|
| Standard Arm ft (mm) |
5' 4" |
|
| Optional Arm ft (mm) |
6' 11" (2110) |
|
| Bucket Range SAE cu yd (cu m) |
0.40 - 0.66 (0.31 - 0.50) |
|
| Reference Bucket SAE cu yd (cu m) |
0.53 (0.41) |
|
| PERFORMANCE |
|
|
| Reach @ G.L. std. Arm ft (mm) |
20' 6" (6250) |
|
| Max Dig Depth - Std. Arm ft (mm) |
13' 6" (4110) |
|
| Dig Depth-8' Flat Bottom-Std Arm ft (mm) |
12' 4" (3760) |
|
| Dig Depth-Vertical Wall-Std Arm ft (mm) |
12' 0" (3660) |
|
| Dump Height - Std. Arm ft (mm) |
16' 10" (5130) |
|
| Lift Cap. Over Frt @G.L. lb (kg) |
4,709 (2136) @15' |
|
| Lift Cap. 360 deg. @ G.L. lb (kg) |
2,924 (1326) @15' |
|
| Arm Force-Normal- Std. Arm lb (kg) |
8,554 (38.0) |
|
| Arm Force-Boost-Std. Arm lb (kg) |
Not published |
|
| Bucket Digging Force - Normal lb (kg) |
12,368 (55.0) |
|
| Bucket Diggine Force - Boost lb (kg) |
Not published |
|
| Tail Swing Radiue ft (mm) |
4' 3" (1300) |
|
| Swing Speed rpm |
10.5 |
|
| TRANSPORT SPECIFICATIONS |
|
|
| Standard Transport Length ft (mm) |
20' 8" (6300) |
|
| Standard Transport Height ft (mm) |
8' 10" (2690) |
|
| Standard Transport Width ft (mm) |
8' 1" (2460) |
|
| CAPACITIES |
|
|
| Fuel Tank gal (L) |
35.7 (135) |
|
| Hydraulic Reservoir gal (L) |
15 (56.8) |
|
| SAE OPERATING WEIGHT lb (kg) |
17,743 (8048) |
|
| Metric Ton Weight |
8.048 |
|
|
|
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
|
|
|
|
|
|
