 |
| MANUFACTURER |
John Deere |
|
| MODEL |
320 Skid Steer |
|
| DATE OF SPECIFICATION |
Mar-08 |
|
| ENGINE |
|
|
| Manufacturer |
John Deere |
|
| Model |
4024T |
|
| Gross Horsepower (kw) |
66 (49) |
|
| Net Horsepower (kw) |
62 (46) |
|
| Rated RPM |
2800 |
|
| Grosspeak Torque, lb-ft (nm) |
156 (212) |
|
| #Cylinders |
4 |
|
| Displacement, cuin(L) |
149 (2.4) |
|
| Engine aspiration |
Turbocharged |
|
| Fuel Capacity, gal (L) |
16 (61) |
|
| HYDRAULIC SYSTEM |
|
|
| Standard Pump Flow, gpm (L/min.) |
19 (72) |
|
| Optional High Flow, gpm (L/min.) |
31 (117) |
|
| System Pressure, PSI (KPA) |
3450 (23770) |
|
| Auxiliary Hydraulic Circuit, Std; Opt |
Std |
|
| Hydraulic power, calculated, hp (kw) |
38.2 (28.5) |
|
| Opt High-Flw Hyd pwr,calculated,hp(kw) |
62.4 (46.8) |
|
| PERFORMANCE |
|
|
| SAE Rated Oper Cap (ROC), lb (kg) |
1,950 (885) |
|
| SAE ROC with opt Counterweight, lb (kg) |
2,300 (1043) |
|
| Tipping Load, standard, lb (kg) |
3,900 (1769) |
|
| Boom, lb(kn) |
3,100 (13.7) |
|
| Bucket, lb(kn) |
5,500 (24.4) |
|
| Heaped Bucket Capacity, cu ft (cum) |
15.89 (0.45) |
|
| Reference Bucket Width, in (mm) |
72" (1830) |
|
| Self leveling bucket, Opt |
Opt |
|
| DRIVE TRAIN |
|
|
| Maximum Grnd Speed,stand,mph (kph) |
6.8 (10.9) |
|
| Two Speed Trans Grnd Speed,mph(kph) |
Not applicable |
|
| Drive chain size |
80 HD |
|
| Axle torque, lb-ft (nm) |
4,725 (6406) |
|
| Standard Tire Size |
12x16.5 |
|
| DIMENSIONS |
|
|
| Length with Bucket, in (mm) |
126" (3200) |
|
| Length Without Bucket,in (mm) |
102" (2590) |
|
| Width Without Bucket, in (mm) |
70" (1780) |
|
| Height to ROPS, in (mm) |
77" (1960) |
|
| Height to Hinge Pin, in (mm) |
115" (115) |
|
| Dump Height, in (mm) |
90" (2290) |
|
| Dump Reach, in (mm) |
28.1" (710) |
|
| Dump Angle, degrees |
45º |
|
| Bucket Rollback @ ground, degrees |
35º |
|
| Wheelbase, in (mm) |
42.3" (1070) |
|
| Ground Clearance, in (mm) |
9.6" (244) |
|
| Angle of Departure, degrees |
27º |
|
| OPERATING WEIGHT, STANDARD LB (kg) |
6,435 (2919) |
|
|
|
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
|
|
|
|
|
|
|
