Drivetrain Specification Sheets

USA/Canada Home

Power Systems

Emissions
Information


Industrial Diesel Engines

Generator Drive Engines

Marine Diesel Engines

Transmissions

Pump Drives

Planetary Drives

Axles

John Deere Reman™

Drivetrain Specifications

Welcome to the John Deere Drivetrain Specifications page. You can now view specifications for Axles, Transmissions, Pump Drives, and Planetary Gear Drives. If you have questions or are not able to find what you are looking for, please contact us.

Funk™ Inboard Planetary Axles
Model	Peak vertical load	Flange to flange mm (in)	Reduction ratios	Peak output torque
Series 1200	240,000 N (54,000 lb)	1300 (51.18) 1500 (59.10) 1700 (66.93) 1953 (76.89)	Min. 4.333:1 Max. 33.429:1	35,000 Nm (310,000 in-lb) per axle shaft
Series 1400	300,000 N (67,000 lb)	1700 (66.93) 1953 (76.89) 110 (4.33)*	Min. 16.208:1 Max. 32.914:1	47,400 Nm (420,000 in-lb) per axle shaft *only 6.400:1 FD ratio reduction
Series 1400 SWEDA	300,000 N (67,000 lb)	2540 (100)	Min. 27.927:1 Max. 32.914:1	47,400 Nm (420,000 in-lb) per axle shaft
Series 1600	395,000 N (88,000 lb)	1994 (78.50) 2094 (82.40) 2198 (86.54)	Min. 16.208:1 Max. 29.922:1	67,700 Nm (600,000 in-lb) per axle shaft
Funk Powershift Transmissions
Model	Input power kW (hp)	Max input no load speed rpm	Max input torque Nm (lb-ft)	Mounting options
DF150	112 (150)	3000	1288 (950)	Engine, midship, or remote
DF250	186 (250)	2600	1898 (1400)	Engine, midship, or remote
2000	168 (225)	3000	1627 (1200)	Engine, midship, or remote
Funk HMD Transmissions
Model	Speeds	Max input power kw (hp)	Max input no load speed rpm	Max input torque Nm (lb-ft)
18000	2	149 (200)	4000	949 (700)
12700	4	104 (140)	2500	407 (300)
33000	4	101 (135)	2400	407 (300)
23000	3, 4	75 (100)	3000	271 (200)
Funk Planetary Gear Drives
Drive Type	Series model	Output torque Nm (lb-ft) Intermittent	Output torque Nm (lb-ft) Continuous	Max input speed rpm
Speed Reducer	F9R F12R F25R	12,880 (9500) 16,948 (12,500) 33,895 (25,000)	8135 (6000) 10,168 (7500) 18,710 (13,800)	2800 2800 2800
Track	P65T P120T	88,127 (65,000) 162,696 (120,000)	56,944 (42,000) 88,127 (65,000)	4000 4000
Funk Pump Drives
Series	Max input power kW (hp)	Max input torque Nm (lb-ft)	Max output torque per pump pad Nm (lb-ft)	Max input or power speed rpm
28000 Single (direct drive)	268 (360)	881 (650)	881 (650)	3000
28,000 Single (5" gear centers)	242 (325)	780 (575)	780 (575)	3000
28000 Double (5" gear centers)	268 (360)	881 (650)	780 (575)	3000
28000 Double (6" gear centers), Triple	268 (360)	1017 (750)	881 (650)	3000
59000 Double, Triple, Four, Four Wide	522 (700)	1695 (1250)	881 (650)	3000
56000 Double, Double (w/shaft drive), Triple, Four	708 (950)	2712 (2000)	2712 (2000)	2500
56000 Five, Five (Deep sump)	708 (950)	2712 (2000)	2034 (1500)	2500
57000 Four (14" and 16" centers)	708 (950)	2712 (2000)	2712 (2000)	2500
Specifications and design subject to change without notice. Ratings may vary depending on application and service. Application and installation are subject to review by John Deere.