/ / / / Fluids For Cotton Pickers

Fluids For Cotton Pickers

Cotton Picker In Field

Spindle Grease

Spindle Grease

Formulated with highly refined base lubricating oil, blended and milled into a lithium-based grease:

  • Enhances lubrication performance
  • Flows freely when warm
  • Resists excessive leakage
  • Seals out moisture and dirt

Performs well over wide range of temperatures:

  • Low starting torque, especially in cold weather
  • Won’t thin down and leak out at higher operating temperatures
  • Resists excessive leakage
  • Seals out moisture and dirt

Special additives:

  • Reduce wear
  • Provide rust protection to picking unit components during off season
  • Prevent metal-to-metal contact for longer service life

Part Number: AN113719 (Spindle Grease, 35 lb.)

Part Number: AN31360 (Spindle Grease, 120 lb.)

Part Number: AN31361 (Spindle Grease, 410 lb.)

Part Number: TY22036 (Spindle Grease, Bulk)

 

Part Number: TY25845 (Spindle Grease, 200 lb.)

 

 

Spindle Cleaner

Spindle Wetting Agent
  • Uniquely formulated to be water soluble and work in all water conditions
  • Will not have harmful effects on doffers or moistener pads
  • Applies easily through small nozzles to reduce consumption and increase productivity
  • Recommended over wetting agents due to superior performance, especially under adverse conditions. This results in:
    • Reduced water usage
    • Drier doors and associated picking parts
    • Less mud buildup and less cleaning of picking units
    • Elimination of green-stained/sticky spindles
    • Less moisture system maintenance (adjustment and replacement of pads)
    • More efficient doffing

Part Number: AN114022 (Spindle Cleaner, 5 gal.)

Part Number: AN114023 (Spindle Cleaner, 55 gal.)

Spindle Wetting Agent

Spindle Wetting Agent
  • Uniquely formulated to be water soluble and work in all water conditions
  • Will not have harmful effects on doffers or moistener pads
  • Applies easily through small nozzles to reduce consumption and increase productivity
  • Recommended over wetting agents due to superior performance, especially under adverse conditions. This results in:
    • Reduced water usage
    • Drier doors and associated picking parts
    • Less mud buildup and less cleaning of picking units
    • Elimination of green-stained/sticky spindles
    • Less moisture system maintenance (adjustment and replacement of pads)
    • More efficient doffing

Part Number: AN114022 (Spindle Cleaner, 5 gal.)

Part Number: AN114023 (Spindle Cleaner, 55 gal.)