/ / / / Residue Management Parts & Attachments

Residue Management Parts & Attachments

Residue Management

Control material distribution more easily.

Order From JD Parts

PowerCast™ Tailboard

PowerCast™ Tailboard
  • Complete tailboard assembly that mounts to the rear of the chopper
  • Helps manage residue distribution with wider platforms
  • Spreads residue from 36 ft. to 50 ft.
  • For no-till applications, this feature spreads residue evenly up to 50 ft., improving seeding equipment performance and increasing crop yields
  • If tillage operations follow the combine, tillage equipment performance improves
  • Simply change the speed by using the set-point adjustment feature. The desired rpm will be reached automatically without requiring you to hold the button.
  • If windrowing residue is required, the PowerCast speed can be set to zero
  • Factory-installed option on 9670 STS™, 9770 STS, 9870 STS and S-Series Combines equipped with a fine-cut two-speed chopper. Also available for field installation on select 50 and 60 Series STS (not for 9560 STS) Combines.

 

Note: Not recommended for platforms 30 ft. or less.

 

How it works:
Two hydraulically driven, counter-rotating disks with paddles are mounted in the chopper tailboard. Crop is discharged from the chopper to the spinning disks where the velocity of the residue is increased, so they can be distributed farther distances.

The distribution disks are driven by the same pump, and the speed is controlled by the same button on the CommandTouch™ armrest used for the straw spreader residue management option.

 

Part Number: BH90128 (Models: PowerCast tailboard for 9650 STS, 9660 STS, 9750 STS, 9760 STS and 9860 STS Combines (PIN 700101 - 715100). Spreads crop residue from 35 ft. to 50 ft. Replaces the existing 8-vane or 12-vane tailboard and includes all hydraulic motors and fittings.)

Part Number: BH90119 (Models: PowerCast tailboard for STS two-speed fine-cut choppers for 9660 STS, 9760 STS and 9860 STS Combines (PIN 715101-725100). Spreads from 35 ft. to 50 ft. Replaces the existing 12-vane tailboard and includes all hydraulic motors and fittings.)

Part Number: BH90153 (Models: PowerCast tailboard for STS two-speed fine cut choppers for 9660 STS, 9670 STS, 9760 STS, 9770 STS, 9860 STS and 9870 STS Combines (PIN 725101 and up). Spreads from 35 ft. to 50 ft. Replaces the existing 12-vane tailboard and includes all hydraulic motors and fittings.)

Part Number: BXE10174 (Models: S Series Combines)

 

Note: Not for use on rice combines and the 9860 STS Premium Combine.

Extra-Wide Straw Spreader

Extra-Wide Straw Spreader
  • Uses two large impellers to ensure uniform, wide distribution of material from the separator and cleaning system
  • Recommended for use when tillage practices do not dictate fine sizing of crop residue
  • Spreader disks are hydraulically driven by two hydraulic motors, and the disk speed can be varied from 150 rpm to 500 rpm right from the operator's station, spreading residue up to 30 ft.
  • Spreader speed is displayed on the CommandCenter™ armrest display. The operator simply dials in the setting using the set-point adjustment feature
  • Straw spreader easily swings up out of the way for windrow applications, and the speed can be set to zero

Note: Not for use on 9560 or 9570 STS™ Combines.

 

Part Number: BH84523 (Models: 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS, S660, S670, S680 and S690 Combines)
Note: This is NOT a complete straw spreader. It is a kit to convert an existing straw spreader to have the capability to spread width up to 40 ft. only.

Cob Deflector

Cob Deflector
  • No longer necessary to unbolt and remove cob deflector for improved airflow in small grain crop. Simply remove one pin and rotate the handle.
  • Protects the chaffer area from cob damage while harvesting corn and provides better access to the cleaning shoe
  • Often provides cleaner grain tank samples when harvesting small grains with the cob deflector in the retracted position

Part Number: AH210096 (Models: 9650 (685501-700500) and 9750 (685601-700600) STS Combines)

Easy Knife Bank Adjustment Kit


  • Adjust the straw chopper stationary knife bank without the use of tools
  • Allows easy adjustment of knife blades when going from crop to crop or varying conditions
  • Desired crop length can be easily optimized while conserving horsepower for more productivity

Part Number: AH219258 (Models: 9560 STS*)

Part Number: AH219257 (Models: 9660 and 9760 STS*)

Part Number: AH219256 (Models: 9860 STS Combines (premium)**)

 

*Machines with serial number (700101-) are equipped with a fine-cut, two-speed chopper.
**Machines with serial number (700101-) are equipped with an extra fine-cut, two-speed chopper.

Copyright © 2014 Deere & Company. All Rights Reserved