/ / / / Grain Tank Parts & Attachments

Grain Tank Parts & Attachments

Combine unloading grain into Grain Tank

Stop grain loss and extend the wear.

Order From John Deere Parts

Unloading Auger Extension

Unloading Auger Extension
  • Gives a minimum of 1 ½ to 3-ft. more length to deliver grain to the truck or grain cart
  • Delivers a controlled stream of crop to grain handling equipment
  • Allows for better control and reduced stress on combine and grain cart operators
  • Current 60 Series boot/spout and breakaway door releases should the spout be accidentally dipped into the grain cart
  • Includes a robust, weld-assembly, grain-saver door
  • Two different auger shafts available: A 90-mm and a 75.4-mm shaft. Two sections of flighting are provided to fit your specific application. This provides a good fit and a proper area to weld.
  • Bearing hanger is a strong 1/2-in. welded assembly. Includes a 4-mm reinforcement. Parts are bolted solidly to the provided auger extension. The auger housing retains roundness when assembled.

Part Number: AH216055 (Models: 9000, 10 and 50 Series Combines)

Engine Air Scoop

Engine Air Scoop
  • Prevents material buildup on the radiator, oil cooler and air charge cooler
  • Mounted high on the machine, allowing it to pull clean air from above the combine Maintains a cleaner engine platform and air filter
  • Ideal for operating in dusty field conditions

Note: In high ambient temperatures, inadequate air flow can cause engine-cooling issues on 9860 STS combines equipped with the retrofitted air scoop.


Part Number: H216209 – Engine air scoop (Models: 9650 (695501-) and 9750 (695601-) STS Combines; and 9660 and 9760 (-715100) STS combines (application Tier 2 engines)

Part Number: AH220663 – Installation and hardware kit

Rotary Screen Brush Kit

Rotary Screen Brush Kit
  • Prevents plugged rotary screens
  • Designed to loosen and sweep material off the engine rotary screen, allowing the vacuum duct to pull chaff off the screen
  • Keeps engine coolant from overheating

Part Number: AH212465 (Models: 9650 STS, 9750 STS, 9660 STS, 9760 STS and 9860 STS Combines)

Part Number: AH212504 (Models: 9450, 9550, 9550SH, 9650, 9560, 9560SH, 9660, 9650 CTS, 9660 CTS (685000-705303) and 9560 STS Combines)

Part Number: AH229322 (Models: 9070 Series STS Combines)

Additional Grain Tank Sensor

Additional Grain Tank Sensor

Enables you to more easily tell when the grain tank is full when harvesting on sidehills.


Part Number: BH78464 (Models: 9550, 9450, 9560, SideHill 9550, 9650 CTS™, 9660 CTS, 9560 and 9660 Combines)

Part Number: BH81598 (Models: 9650 STS, 9560 STS, 9660 STS, 9750 STS, 9760 STS, 9860 STS, 9570 STS, 9670 STS, 9770 STS and 9870 STS Combines)

Part Number: BXE10270 (Models: S Series Combines)

Grain Tank Clean-Out Chute

Grain Tank Clean-Out Chute
  • Keeps combine clean
  • Prevents grain spillage during cleanout
  • Rainwater drains out of the grain tank away from the combine
  • Easy-access door

Part Number: AH167433 (Models: 900, 9010, 9050 and 9060 Walker Combines; CTS and CTS II Combines; 9050, 9060 and 9070 Series STS Combines; and S550, S660 and S670 Combines with 3.3 bps unload rate)

Trough Liners

Trough Liners
  • Designed to repair worn areas or holes in the grain tank cross auger trough, preventing grain loss and extending wear life
  • Stainless steel
  • Long wear extends machine life
  • Easy to install
  • Enhances machine resale value

Part Number: AH168093 (Models: 9000, 9010, 9050, and 9060 Series Walker Combines and CTS Combines)

Part Number: AH202864 (Models: 9650, 9750, 9560, 9660, 9760, 9570 and 9670 STS Combines*)


*Note: Not for use on high unloading rate systems

Unloading Auger Charge Housing Repair Kit

Unloading Auger Charge Housing Repair Kit
  • Stainless steel
  • Eliminates grain loss through worn holes in the combine’s unloading auger charge housing
  • Extends service life of the charge housing and allows easy bolt-on installation under the unloading auger charge housing

Part Number: AH207779 (Models: 9000, 9010, 9050, and 9060 Series Walker Combines, CTS Combines, 9650, 9750, 9560, 9660, 9760, 9570 and 9670 STS Combines*)


*Note: Not for use on high unloading rate systems