|
|
| |  | |
Get the most out of you Arable or Contractor Business with AutoTrac!
The farming business is more competitive than ever. You need to get the most out of every hectare you till, seed, plant, fertilise and harvest while closely managing your input costs, time and labour.
The benefits of adding a GreenStar AutoTrac Assisted Steering System to your operation can help you remain successful, run a competitive business and facilitate your operation.
AutoTrac reduces overlap, thereby saving you time, fuel and labour costs. Regardless of whether you’re breaking stubble with tillage equipment, planting or seeding, spraying or fertilising, AutoTrac reduces implement overlap by up to 10%. You’ll also get faster headland turns because AutoTrac takes the guesswork out of your return path.
AutoTrac has a proven record of success. It changes farming and your business, for the better. Now your work is more precise, convenient and profitable.
See your John Deere Dealer about putting a GreenStar AutoTrac guidance system to work in your business.
AutoTrac Advantages over manual steering
Tillage
-
Stubble breaking in 30° angle to seeding
-
Land levelling
-
Up to 10% less overlap = up to 10% cost reduction
-
Faster headland turns, e.g. taking every 2nd row
-
Less ground compaction
Seeding/Planting/Drilling/Fertilising
-
Reduce seed costs through minimised overlap
-
Save up to 5% on fertiliser and spray costs due to accurate tramline placement
-
Continue work in low visibility situations
-
Higher operator comfort
Spraying
-
Reduce overlaps on bare soil without guidance marks
-
Marker function to guide you back to where you left off after refilling - quicker than flags and not affected by the wind like foam markers
-
Increase spraying accuracy and field speeds
-
Higher operator comfort and concentration on sprayer functions
-
Simultaneous documentation of spray job with Field Doc
Fertiliser Spreading
-
Reduce overlaps on bare soil without guidance marks
-
Marker function to guide you back to where you left off after refilling
-
Simultaneous documentation of volumes spread with Field Doc
-
Continue working in low visibility situations
-
Up to 18% higher productivity (according to University of Hohenheim)
Harvesting
-
Always a full cut in straight tracks or curves
-
Open up straight and parallel lands
-
Higher concentration on optimising combine performance
-
Continue working at night or in low visibility situations
-
Unload on-the-go with ease when the tractor has AutoTrac as well
-
Faster headland turns, e.g. taking every second or third pass
-
Up to 10% less overlap = up to 10% less cost and higher productivity (according independent tests)
|
|
|
|
