| MANUFACTURER |
John Deere |
John Deere |
John Deere |
| MODEL |
180C |
220C |
260C |
| Engine |
|
|
|
| Type |
Honda, air-cooled, GX120 |
| Cycle |
4-cycle |
| Bore and stroke |
60 x 44 mm |
| Piston displacement |
118 cc |
| Compression ratio |
8:5:1 |
| Horsepower |
2.98 kW (4.0 hp) @ 3600 rpm |
| * Engine hp is provided by engine mfr. for comparison purposes only. Actual operating hp will be less. |
| Direction of rotation of output shaft |
Counterclockwise viewed from shaft side |
| Inclination limit |
Tilted up to 20 degrees in any direction |
| Idle speed at output shaft |
1,300 rpm |
| Maximum speed at output shaft |
3100 rpm |
| Fuel |
|
|
|
| Type |
Regular grade unleaded or leaded |
Regular grade unleaded or leaded |
Regular grade unleaded or leaded |
| Tank capacity |
2.5 L |
2.5 L |
2.5 L |
| Oil |
|
|
|
| Type |
SAE30 or SAE 10W-30 |
SAE30 or SAE 10W-30 |
SAE30 or SAE 10W-30 |
| Capacity |
0.57 L |
0.57 L |
0.57 L |
| Differential drive capacity |
0.35 L |
0.35 L |
0.35 L |
| Cutting Equipment |
|
|
|
| Cutting width |
45.7 cm (18 in) |
55.9 cm (22 in) |
66.0 cm (26 in) |
| Cutting height (minimum) |
--- |
--- |
--- |
| Standard - 3.0
mm bedknife |
3.2 mm |
3.2 mm
- standard on 220C |
3.2 mm
- standard on 260C |
| Optional - 2.5
mm bedknife |
2.8 mm
- standard on 180C |
2.8 mm |
N/A |
| Optional - 2.0
mm bedknife |
2.0 mm |
2.0 mm |
N/A |
| Optional - tee
bedknife |
N/A |
N/A |
4.8 mm |
| Frequency of clip standard |
4.62 mm |
4.62 mm |
4.62 mm 11 blade;
7.26 mm 7 blade |
| Reel |
|
|
|
| Diameter |
127 mm |
127 mm |
127 mm |
| Number of blades |
11 blade |
11 blade |
7 or 11 blade |
| Material |
Heat-treated chromium molydenum steel |
Heat-treated chromium molydenum steel |
Heat-treated chromium molydenum steel |
| Bedknife - standard |
2.5 mm thick x 45.8 cm long |
3.0 mm thick x 56.0 cm long |
3.0 mm thick x 66.0 cm long |
| Rotary Brush and Greens Tender Conditioner (Optional) |
|
|
|
| Brush |
Interlocked w/ reel, rotation in reverse direction; 60 mm diameter nylon |
| Vertical cutter blades |
Specially hardened carbon tool steel; star shaped; 60 mm diameter, 60 blades |
Specially hardened carbon tool steel; star shaped; 60 mm diameter, 75 blades |
Specially hardened carbon tool steel; star shaped; 60 mm diameter, 88 blades |
| Adjustable brush or cutter height |
10 mm below to 16 mm above cut |
| Gear drive |
Gear driven from reel shaft, opposite direction of reel, rotation powers brush or vertical cutter |
| Grass Catcher |
|
|
|
| Size |
2.7 kg |
3.2 kg |
3.7 kg |
| Type |
Polyethylene |
Polyethylene |
Polyethylene |
| Clutches |
|
|
|
| Transport |
Belt tension |
Belt tension |
Belt tension |
| Reel jaw-type clutch |
On/off |
On/off |
On/off |
| Brush/GTC jaw-type clutch |
On/off |
On/off |
On/off |
| Traction drum |
Dual, aluminum, traction |
Dual, aluminum, traction |
Dual, aluminum, traction |
| Travelling Device |
|
|
|
| Forward speed |
8.4 km/h with transport wheels @3500 engine rpm |
| Roller (rear) |
Aluminum, 190 mm diameter |
Aluminum, 190 mm diameter |
Aluminum, 190 mm diameter; dimpled |
| Roller (front) (grooved or smooth) |
Machined steel, 60 mm diameter (for cutting height adjustment) |
| Dimensions |
|
|
|
| Length (w/tyres installed) |
94 cm |
94 cm |
94 cm |
| Width (w/tyres installed) |
84.5 cm |
94.6 cm |
104.8 cm |
| Height (w/tyres installed) |
119 cm |
119 cm |
119 cm |
| Weight (less GTC's, gear drive and
transport wheel, with catcher) |
92.3 kg |
99.5 kg |
106.8 kg |
| Sound Levels |
|
|
|
| Operator ear |
82 dB(A) |
84 dB(A) |
83 dB(A) |
| Measuring standard |
ISO 11201 |
ISO 11201 |
ISO 11201 |
| Attachments installed |
GTCs, reels engaged |
GTCs, reels engaged |
GTCs, reels engaged |
| Certificate |
|
|
|
| Type |
ANSI B71.4-2004 |
ANSI B71.4-2004 |
ANSI B71.4-2004 |
