| MANUFACTURER |
John Deere |
| MODEL |
TC125 |
| Machine |
|
| Vehicle requirements |
Powered by
either a compact utility tractor or HDUV with a Selective Control Valve
(SCV). Hydraulic requirements - 6 gpm (23 Lpm), 2,000 psi (13.8 mPa) minimum
continuous |
| Gathering width |
121.9 cm |
| Hopper capacity |
0.71 cubic
metres |
| Hitch |
Attaches
with standard 19 mm hitch pin |
| Offset towing feature |
Allows the
unit to be towed directly behind or offset to the left side of the vehicle.
Easily performed while operator remains seated. |
| Hydraulic collection |
3
quick-disconnect couplers (2 rotary brush, 1 lift cylinder) |
| Lift |
Hydraulic
powered lift cylinder for dumping |
| Pick-Up system |
Hydraulic
powered rotary brush |
| Brush speed |
500-600
rpm, direct drive hydraulic motor |
| Rollers |
Brush
aggressiveness and flotation is controlled by a 6-in (15.24 cm) diameter full
width roller mounted directly behind the rotary brush. The roller height can be
adjusted to accommodate the turf conditions and degree of brush wear. |
| Productivity |
Clears an
average green in 15 minutes |
| Tires |
26.5x14x12 |
| Dimensions |
|
| Height |
162.5 cm
lowered; 368 cm raised |
| Length |
350.5 cm |
| Width |
238.7 cm |
| Weight |
578 kg |
| Dump height clearance |
120 cm |
