Australia/New Zealand

 Home Products &
Equipment
 Parts &
Service
 Finance
Solutions
 Dealer
Information
 Info & Fun
Corner
 
Golf & Turf>Specialty Golf & Turf Equipment>Specifications - Debris Maintenance
Agriculture
Catalogues
Golf & Turf
Specialty Golf & Turf Equipment
Brochure
Specifications - Aerators
Specifications - Debris Maintenance
Grounds Care & Home Owners
Engines
Merchandise Clothing & Gifts 
Toys
Government Sales
Used Equipment
Request Information
Debris Maintenance : Specifications

Untitled Document
MANUFACTURER John Deere MANUFACTURER John Deere
MODEL CP48 Pulveriser MODEL TC125
Vehicle requirements 272 kg towing capacity and 12-volt electrical system Vehicle requirements Powered by either a compact utility tractor or HDUV with a Selective Control Valve (SCV). Hydraulic requirements - 6 gpm (23 Lpm), 2,000 psi (13.8 mPa) minimum continuous
Gathering width 121.9 cm Gathering width 121.9 cm
Belt-driven brushes and blade shaft: Hopper capacity 0.71 cubic metres
Brush speed 750-850 rpm brush speed Hitch Attaches with standard 19 mm hitch pin
Blade speed 1500-1600 rpm blade speed Offset towing feature Allows the unit to be towed directly behind or offset to the left side of the vehicle. Easily performed while operator remains seated.
Hitch Attaches with standard 47 mm. ball hitch Hydraulic collection 3 quick-disconnect couplers (2 rotary brush, 1 lift cylinder)
Offset towing feature Allows the unit to be towed either directly behind or offset to the right side of the towing vehicle Lift Hydraulic powered lift cylinder for dumping
Controls The engagement of the clutch is done from the operator's station Pick-Up system Hydraulic powered rotary brush
Engine manufacturer Kohler Command Pro 12 horsepower Brush speed 500-600 rpm, direct drive hydraulic motor
Recommended operating tyre pressure 10-12 psi (69-83 kPa) Rollers Brush aggressiveness and flotation is controlled by a 15.24 cm (6-in) diameter full width roller mounted directly behind the rotary brush. The roller height can be adjusted to accommodate the turf conditions and degree of brush wear.
Brush Eight-section polyester bristle Productivity Clears an average green in 15 minutes
Brush adjustments The brushes are adjusted by height adjustment cranks on both sides of the unit Tyres 26.5x14x12
Productivity Clears an average green in 10 minutes; one-person operation Dimensions
Tyres Two 18x 8.5 -8 4 ply turf tyres Height 162.5 cm lowered; 368 cm raised
Dimensions: Length 350.5 cm
Height 81.3 cm Width 238.7 cm
Length including tongue 243.8 cm Weight 578 kg
Width 190.5 cm Dump height clearance 120 cm
Weight 263 kg

*Specifications subject to change. Please contact your local dealer for more detailed information.




  Printer FriendlyPrinter Friendly   
Copyright © 1996-2009 Deere & Company.
All Rights Reserved.
Site Map | Privacy | Legal